Hostname: page-component-cd9895bd7-gvvz8 Total loading time: 0 Render date: 2024-12-27T12:42:48.895Z Has data issue: false hasContentIssue false
  • English
  • Français

Dual band circular polarized bow tie slotted patch antenna over high impedance surface for WiMAX application

Published online by Cambridge University Press:  24 October 2019

Kumar Goodwilll ,
Neha Singh  and
M.V. Kartikeyan Open the ORCID record for M.V. Kartikeyan [Opens in a new window]
Kumar Goodwilll
Affiliation:
Department of Electronics and Communication Engineering, Indian Institute of Technology Roorkee, Roorkee-247667, India
Neha Singh*
Affiliation:
Department of Electronics and Communication Engineering, Indian Institute of Technology Roorkee, Roorkee-247667, India
M.V. Kartikeyan
Affiliation:
Department of Electronics and Communication Engineering, Indian Institute of Technology Roorkee, Roorkee-247667, India
*
Author for correspondence: Neha Singh, E-mail: er.nsingh1@gmail.com
Get access Rights & Permissions [Opens in a new window]

Abstract

A novel planar dual-band bow-tie slotted patch antenna backed by high-impedance surface (HIS) is designed at 2.5 and 3.5 GHz for wireless application. The antenna employs coplanar waveguide fed patch and bow-tie slot as radiating elements. The bow-tie slot enables dual-band operation for the antenna. The HIS is made asymmetric in design to make it polarization dependent. This polarization-dependent HIS is eventually designed to reflect circularly polarized waves from linearly polarized incident waves.

Keywords

High Impedance surface (HIS)bow-tie slotpatch antennacircular polarizationCPW feeddual bandWiMAX
Type
Research Papers
Information
International Journal of Microwave and Wireless Technologies , Volume 12 , Issue 4 , May 2020 , pp. 303 - 308
Copyright
Copyright © Cambridge University Press and the European Microwave Association 2019

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1.Balanis, CA (2016) Antenna Theory: Analysis and Design. Hoboken, New Jersey: John Wiley & Sons.Google Scholar
2.Balanis, CA (2012) Advanced Engineering Electromagnetics. Hoboken, New Jersey: John Wiley & Sons.Google Scholar
3.Sievenpiper, D, Zhang, L, Broas, RFJ, Opolous, NGA and Yablonovitch, E (1999) High-impedance electromagnetic surfaces with a forbidden frequency band. IEEE Transactions on Microwave Theory and Techniques 47, 2059–2066.CrossRefGoogle Scholar
4.Kovacs, P and Puskely, J (2013) Stacked High-Impedance Surface (HIS) for 5 GHz WLAN applications. Radioengineering 22, 318–320.Google Scholar
5.Zhang, Y, Hagen, JV, Younis, M, Fischer, C and Wiesbeck, W (2003) Planar artificial magnetic conductors and patch antennas. IEEE Transaction on Antennas and Propagation 51, 2704–2708.CrossRefGoogle Scholar
6.Yang, F and Rahmat-Samii, Y (2003) Reflection phase characterizations of the EBG ground plane for low profile wire antenna applications. IEEE Transaction on Antennas and Propagation 51, 2691–2703.CrossRefGoogle Scholar
7.Sievenpiper, DF, Schaffner, JH, Song, HJ, Loo, RY and Tangonan, G (2003) Two-dimensional beam steering using an electrically tunable impedance surface. IEEE Transactions on Antennas and Propagation 51, 2713–2714.CrossRefGoogle Scholar
8.Zhu, HL, Cheung, SW, Liu, XH and Yuk, TI (2014) Design of polarization reconfigurable antenna using metasurface. IEEE Transactions on Antennas and Propagation 62, 2891–2894.CrossRefGoogle Scholar
9.Engheta, N and Ziolkowski, RW (2006) Metamaterials: Physics And Engineering Explorations. Piscataway, New Jersey: John Wiley & Sons, Inc., Publication.CrossRefGoogle Scholar
10.Agarwal, K, Nasimuddin, and Alphones, A (2013) Design of compact circularly polarized microstrip antennas using meta-surfaces, Microwave Conference (EuMC), 2013 European, pp. 1067–1070, 6–10 Oct. 2013.Google Scholar
11.Yang, F and Rahmat-Samii, Y (2005) A low profile single dipole antenna radiating circular polarized waves. IEEE Transactions on Antennas and Propagation 53, 3083–3086.CrossRefGoogle Scholar
12.Zhu, H, Cheung, SW and Yuk, TI (2013) Dual-band Slot Antenna Using CPW Feed Line and Metasurface, Progress in Electromagnetics Research Symposium Proceedings, Taipei, pp. 833–835, March 25–28, 2013.Google Scholar
13.Zhu, S and Langley, R (2007) Dual-band wearable antennas over EBG substrate. Electronics Letters 43, 141–142.CrossRefGoogle Scholar
14.Yan, S, Soh, PJ, Mercuri, M, Schreurs, D and Vandenbosch, GAE (2015) Low profile dual-band antenna loaded with artificial magnetic conductor for indoor radar systems. IET Radar Sonar Navigation 9, 184–190.CrossRefGoogle Scholar
15.Yi, H and Qu, SW (2013) A novel dual-band circularly polarized antenna based on electromagnetic band-gap structure. IEEE Antennas and Wireless Propagation Letters 12, 1149–1152.CrossRefGoogle Scholar
16.Liang, B, Sanz-Izquierdo, B, Parker, EA and Batchelor, JC (2015) A frequency and polarization reconfigurable circularly polarized antenna using active EBG structure for satellite navigation. IEEE Transactions on Antennas and Propagation 63, 33–38.CrossRefGoogle Scholar
17.Mobile Radio Specification, Release 2, WMF-T23-005-R020v01, WiMax Forum Proprietary, ITU, 2012.Google Scholar
18.Yi, H and Qu, SW (2013) A novel dual-band circularly polarized antenna based on electromagnetic band-gap structure. IEEE Antennas and Wireless Propagation Letters 12, 1149–1152.CrossRefGoogle Scholar