Hostname: page-component-cd9895bd7-q99xh Total loading time: 0 Render date: 2024-12-27T11:28:01.110Z Has data issue: false hasContentIssue false
  • English
  • Français

Catalytic influence of Ni-based additives on the dehydrogenation properties of ball milled MgH2

Published online by Cambridge University Press:  26 August 2011

Placidus B. Amama ,
John T. Grant ,
Jonathan E. Spowart ,
Patrick J. Shamberger ,
Andrey A. Voevodin  and
Timothy S. Fisher
Placidus B. Amama*
Affiliation:
Air Force Research Laboratory, Materials and Manufacturing Directorate, RXB, Wright-Patterson AFB, Ohio 45433; and University of Dayton Research Institute (UDRI), University of Dayton, Dayton, Ohio 45469
John T. Grant
Affiliation:
Air Force Research Laboratory, Materials and Manufacturing Directorate, RXB, Wright-Patterson AFB, Ohio 45433; and University of Dayton Research Institute (UDRI), University of Dayton, Dayton, Ohio 45469
Jonathan E. Spowart
Affiliation:
Air Force Research Laboratory, Materials and Manufacturing Directorate, RXB, Wright-Patterson AFB, Ohio 45433
Patrick J. Shamberger
Affiliation:
Air Force Research Laboratory, Materials and Manufacturing Directorate, RXB, Wright-Patterson AFB, Ohio 45433
Andrey A. Voevodin
Affiliation:
Air Force Research Laboratory, Materials and Manufacturing Directorate, RXB, Wright-Patterson AFB, Ohio 45433
Timothy S. Fisher
Affiliation:
Air Force Research Laboratory, Materials and Manufacturing Directorate, RXB, Wright-Patterson AFB, Ohio 45433; and School of Mechanical Engineering, Purdue University, West Lafayette, Indiana 47907; and Birck Nanotechnology Center, Purdue University, West Lafayette, Indiana 47907
*
a)Address all correspondence to this author. e-mail: Placidus.Amama@wpafb.af.mil
Get access

Abstract

The catalytic influence of Ni, Zr2Ni5, and LaNi5 on the dehydrogenation properties of milled MgH2 was investigated. MgH2 milled in the presence of Ni (5 wt%) and Zr2Ni5 (5 wt%) catalysts for 2 h showed apparent activation energies, EA, of 81 and 79 kJ/mol, respectively, corresponding to ∼50% decrease in EA and a moderate decrease (∼100 °C) in the decomposition temperature (Tdec). A further 27 °C decrease in Tdec was observed after milling with 10 wt%Ni. Based on the EA values, the catalytic activity decreased in the following order: Ni ≈ Zr2Ni5 > LaNi5. X-ray photoelectron spectroscopy analysis of the milled and dehydrogenated states of the hydrides modified with Ni catalyst revealed that the observed reduction in EA may be due to the ability of Ni catalyst to decrease the amount of oxygen atoms in defective positions that are capable of blocking catalytically active sites thereby enhancing the dehydrogenation kinetics. In particular, our results reveal a strong correlation between the type of oxygen species adsorbed on Ni-modified MgH2 and the EA of the dehydrogenation reaction.

Keywords

Energy storageCatalyticX-ray photoelectron spectroscopy
Type
Articles
Information
Journal of Materials Research , Volume 26 , Issue 21 , 14 November 2011 , pp. 2725 - 2734
Copyright
Copyright © Materials Research Society 2011

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1.Cai, Y., Wei, Q., Huang, F., Lin, S., Chen, F., and Gao, W.: Thermal stability, latent heat and flame retardant properties of the thermal energy storage phase change materials based on paraffin/high density polyethylene composites. Renew. Energy 34, 2117 (2009).CrossRefGoogle Scholar
2.Molefi, J.A., Luyt, A.S., and Krupa, I.: Investigation of thermally conducting phase-change materials based on polyethylene/wax blends filled with copper particles. J. Appl. Polym. Sci. 116, 1766 (2010).CrossRefGoogle Scholar
3.Stryker, P.C. and Sparrow, E.M.: Application of a spherical thermal conductivity cell to solid n-eicosane paraffin. Int. J. Heat Mass Transfer 33, 1781 (1990).CrossRefGoogle Scholar
4.Zhang, J., Fisher, T.S., Ramachandran, P.V., Gore, J.P., and Mudawar, I.: A review of heat transfer issues in hydrogen storage technologies. J. Heat Transfer 127, 1391 (2005).CrossRefGoogle Scholar
5.Carey, V.P.: Liquid-Vapor Phase-Change Phenomena (Hemisphere Publishing Corporation, Washington, DC, 1992).Google Scholar
6.Park, C., Tang, X., Kim, K.J., Gottschlich, J., and Leland, Q.: Metal hydride heat storage technology for directed energy weapon systems, in Proceedings of International Mechanical Engineering Congress & Exposition (IMECE2007-42831), Vol. 961, November 10–16, 2007, p. 9.Google Scholar
7.Reiser, A., Bogdanovic, B., and Schlichte, K.: The application of Mg-based metal-hydrides as heat energy storage systems. Int. J. Hydrogen Energy 25, 425 (2000).CrossRefGoogle Scholar
8.Tanniru, M., Tien, H.Y., and Ebrahimi, F.: Study of the dehydrogenation behavior of magnesium hydride. Scr. Mater. 63, 58 (2010).CrossRefGoogle Scholar
9.George, L. and Saxena, S.K.: Structural stability of metal hydrides, alanates and borohydrides of alkali and alkali-earth elements: A review. Int. J. Hydrogen Energy 35, 5454 (2010).CrossRefGoogle Scholar
10.Sakintuna, B., Lamari-Darkrim, F., and Hirscher, M.: Metal hydride materials for solid hydrogen storage: A review. Int. J. Hydrogen Energy 32, 1121 (2007).CrossRefGoogle Scholar
11.Varin, R.A., Czujko, T., and Wronski, Z.S.: Nanomaterials for Solid State Hydrogen Storage (Springer, New York, 2009).CrossRefGoogle Scholar
12.Nagano, S., Kitajima, T., Yoshida, K., Kazao, Y., Kabata, Y., Murata, D., and Nagakura, K.: Development of world’s largest hydrogen-cooled turbine generator, in Power Engineering Society Summer Meeting, IEEE, Vol. 2, July 25, 2002, pp. 657–663.CrossRefGoogle Scholar
13.Croston, D.L., Grant, D.M., and Walker, G.S.: The catalytic effect of titanium oxide based additives on the dehydrogenation and hydrogenation of milled MgH2. J. Alloy. Comp. 492, 251 (2010).CrossRefGoogle Scholar
14.Polanski, M. and Bystrzycki, J.: The influence of different additives on the solid-state reaction of magnesium hydride (MgH2) with Si. Int. J. Hydrogen Energy 34, 7692 (2009).CrossRefGoogle Scholar
15.Vajo, J.J., Skeith, S.L., and Mertens, F.: Reversible storage of hydrogen in destabilized LiBH4. J. Phys. Chem. B 109, 3719 (2005).CrossRefGoogle ScholarPubMed
16.Varin, R.A., Czujko, T., and Wronski, Z.: Particle size, grain size and gamma-MgH2 effects on the desorption properties of nanocrystalline commercial magnesium hydride processed by controlled mechanical milling. Nanotechnology 17, 3856 (2006).CrossRefGoogle Scholar
17.Kalidindi, S.B. and Jagirdar, B.R.: Highly monodisperse colloidal magnesium nanoparticles by room temperature digestive ripening. Inorg. Chem. 48, 4524 (2009).CrossRefGoogle ScholarPubMed
18.Grochala, W. and Edwards, P.P.: Thermal decomposition of the non-interstitial hydrides for the storage and production of hydrogen. Chem. Rev. 104, 1283 (2004).CrossRefGoogle ScholarPubMed
19.Varin, R.A., Czujko, T., Wasmund, E.B., and Wronski, Z.S.: Catalytic effects of various forms of nickel on the synthesis rate and hydrogen desorption properties of nanocrystalline magnesium hydride (MgH2) synthesized by controlled reactive mechanical milling (CRMM). J. Alloy. Comp. 432, 217 (2007).CrossRefGoogle Scholar
20.Huot, J., Pelletier, J.F., Lurio, L.B., Sutton, M., and Schulz, R.: Investigation of dehydrogenation mechanism of MgH2-Nb nanocomposites. J. Alloy. Comp. 348, 319 (2003).CrossRefGoogle Scholar
21.Hanada, N., Ichikawa, T., and Fujii, H.: Catalytic effect of nanoparticle 3d-transition metals on hydrogen storage properties in magnesium hydride MgH2 prepared by mechanical milling. J. Phys. Chem. B 109, 7188 (2005).CrossRefGoogle ScholarPubMed
22.Mao, J., Guo, Z., Yu, X., Liu, H., Wu, Z., and Ni, J.: Enhanced hydrogen sorption properties of Ni and Co-catalyzed MgH2. Int. J. Hydrogen Energy 35, 4569 (2010).CrossRefGoogle Scholar
23.Yang, W.N., Shang, C.X., and Guo, Z.X.: Site density effect of Ni particles on hydrogen desorption of MgH2. Int. J. Hydrogen Energy 35, 4534 (2010).CrossRefGoogle Scholar
24.Xie, L., Liu, Y., Zhang, X., Qu, J., Wang, Y., and Li, X.: Catalytic effect of Ni nanoparticles on the desorption kinetics of MgH2 nanoparticles. J. Alloy. Comp. 482, 388 (2009).CrossRefGoogle Scholar
25.Liang, G., Huot, J., Boily, S., Van Neste, A., and Schulz, R.: Hydrogen storage in mechanically milled Mg-LaNi5 and MgH2-LaNi5 composites. J. Alloy. Comp. 297, 261 (2000).CrossRefGoogle Scholar
26.Spassov, T., Delchev, P., Madjarov, P., Spassova, M., and Himitliiska, T.: Hydrogen storage in Mg-10áat.% LaNi5 nanocomposites, synthesized by ball milling at different conditions. J. Alloy. Comp. 495, 149 (2010).CrossRefGoogle Scholar
27.Dehouche, Z., Peretti, H.A., Hamoudi, S., Yoo, Y., and Belkacemi, K.: Effect of activated alloys on hydrogen discharge kinetics of MgH2 nanocrystals. J. Alloy. Comp. 455, 432 (2008).CrossRefGoogle Scholar
28.Kissinger, H.E.: Reaction kinetics in differential thermal analysis. Anal. Chem. 29, 1702 (1957).CrossRefGoogle Scholar
29.Huot, J., Liang, G., Boily, S., Van Neste, A., and Schulz, R.: Structural study and hydrogen sorption kinetics of ball-milled magnesium hydride. J. Alloy. Comp. 293–295, 495 (1999).CrossRefGoogle Scholar
30.Ares, J.R., Aguey-Zinsou, K.F., Klassen, T., and Bormann, R.: Influence of impurities on the milling process of MgH2. J. Alloy. Comp. 434–435, 729 (2007).CrossRefGoogle Scholar
31.Hanada, N., Ichikawa, T., and Fujii, H.: Catalytic effect of Ni nano-particle and Nb oxide on H-desorption properties in MgH2 prepared by ball milling. J. Alloy. Comp. 404–406, 716 (2005).CrossRefGoogle Scholar
32.Yonkeu, A.L., Swainson, I.P., Dufour, J., and Huot, J.: Kinetic investigation of the catalytic effect of a body centered cubic-alloy TiV1.1Mn0.9 (BCC) on hydriding/dehydriding properties of magnesium. J. Alloy. Comp. 460, 559 (2008).CrossRefGoogle Scholar
33.Wagner, C.D., Naukim, A.V., Kraut-Vass, A., Allison, J.W., Powell, C.J., and Rumble, J.R. Jr. NIST X-ray Photoelectron Spectroscopy Database 20, Version 3.5 (National Institute of Standard and Technology, Gaithersburg, MD, 2007); http://srdata.nist.gov/xps/ (accessed December 8, 2010).Google Scholar
34.He, Z.X. and Pong, W.: X-ray photoelectron spectra of MgH2. Phys. Scr. 41, 930 (1990).CrossRefGoogle Scholar
35.Splinter, S.J., Mclntyre, N.S., Lennard, W.N., Griffiths, K., and Palumbo, G.: An AES and XPS study of the initial oxidation of polycrystalline magnesium with water vapour at room temperature. Surf. Sci. 292, 130 (1993).CrossRefGoogle Scholar
36.Ershova, O.G., Dobrovolsky, V.D., Solonin, Y.M., Khyzhun, O.Y., and Koval, A.Y.: Influence of Ti, Mn, Fe, and Ni addition upon thermal stability and decomposition temperature of the MgH2 phase of alloys synthesized by reactive mechanical alloying. J. Alloy. Comp. 464, 212 (2008).CrossRefGoogle Scholar
37.Dobrovolsky, V.D., Yendrzheevskaya, S.N., Sinelnichenko, A.K., Skorokhod, V.V., and Khyzhun, O.Y.: Analysis of the surface condition of Ti4Fe2Ox. Int. J. Hydrogen Energy 21, 1061 (2011).CrossRefGoogle Scholar