Hostname: page-component-78c5997874-g7gxr Total loading time: 0 Render date: 2024-11-10T21:10:34.766Z Has data issue: false hasContentIssue false
  • English
  • Français

Highly effective use of Australian Pilbara blend lump ore in ablast furnace*

Published online by Cambridge University Press:  10 August 2010

S. Wu ,
H. Han ,
X. Liu ,
H. Wang  and
F. Xue
Get access

Abstract

The Australian Pilbara blend lump ore, which entered the Chinese market in 2007, is aspecial blending ore. To master its behavior and effect in a BF adequately, themetallurgical properties and high temperature reactivity of the Pilbara blend lump ore andsix other kinds of lump ore were researched. The reasonable proportion and mixing patternof the Pilbara blend lump ore was studied by carrying out softening and dropping propertytests, and this provides technological support for practical production.

Keywords

Blast furnacePilbara blend lump oremetallurgical propertiesreducibilitysoftening-meltingburden structureHaut fourneauminerai rocheux mélange Pilbarapropriétés métallurgiquesréductibilitéramollissement-fusionstructure de la charge
Type
Research Article
Information
Metallurgical Research & Technology , Volume 107 , Issue 5 , May 2010 , pp. 187 - 193
Copyright
© EDP Sciences

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

L.H. Cao, S.L. Wu, S.M. Li, et al., Research on the metallurgical properties of reasonable charge structure in Xuanhua Steel, Collection of National Conference on iron production technology of and Annual Meeting on iron making, Chinese, 2006, p. 78
J.L. Guo, H.Guo, J.L. Zhang, et al., Research on reasonable BF charge structure, The 4th Metallurgical Engineering Proceedings (in Chinese). Beijing: metallurgical Industry press, 2007, p. 92
Z.X. Zhao, Y. Zhao, J. Guo, et al., Research on Hainan lump ore in capital steel qinhuangdao BF, Collection of the 10th National Symposium on ironmaking raw materials (in Chinese). Guiyang: Chinese Society for Metals, 2007, p. 302
X.L. Wang, Iron and Steel Metallurgy (Iron Making part). Beijing: Metallurgical Industry Press, 2002
Nogueira, Paulo F, Fruehan, et al., Fundamental studies on blast furnace burden softening and melting, 2nd International Meeting on Ironmaking and the 1st International Symposium on Iron Ore. Rio de Janeiro, Brazil, 2004, p. 893
V.J. Ritz, H.A. Kortmann, K. Koch, Reduction. softening and melting properties of pellets, sinters, lumpy ore and mixed blast furnace burde, 2nd International Congress on the Science and Technology of Ironmaking and 57th Ironmaking Conferenc. Toronto, Canada, 1998, p. 1635
S.L. Wu, H.F. Xu, G.J. Wang, et al., Basic research on natural lump ore in the modern BF, J. Univ. Sci. Technol. Beijing, Chinese, 29 (2007), p. 320
S.L. Wu, J.D. Sun, J. X. Du, et al., The new concept of mutual reactivity between sinter and lump ore in high-temperature zone of blast furnace, The 3rd Metallurgical Engineering Proceedings (in Chinese). Beijing: metallurgical Industry press, 2005, p. 42
J.D. Sun, Basic study on the reasonable use of lump ores in Baosteel blast burnaces: Master’s Degree Study[D]. Beijing: University Of Science And Technology Beijing, 2005
S.L. Wu, G.J. Wang, W.Z. Jiang, et al., Interaction between lump ore and sinter in BF, Iron and Steel (in Chinese), 42 (2007), p. 10
S.L. Wu, H.F. Xu, Y.Q. Tian, The value of interaction between natural lump ore and sinter in high-temperature zone of blast furnace, The 4th International Congress on the Science and Technology of Ironmaking, 2006, p. 197