Hostname: page-component-78c5997874-4rdpn Total loading time: 0 Render date: 2024-11-10T15:41:15.877Z Has data issue: false hasContentIssue false
  • English
  • Français

On the effect of nitrogen on duplex stainless steels

Published online by Cambridge University Press:  02 February 2012

S. Hertzman  and
J. Charles
S. Hertzman
Affiliation:
Outokumpu Stainless Research Foundation, Royal Institute of Technology, KTH, Brinellvägen 23, SE-100 44 Stockholm, Sweden. e-mail: Staffan.Hertzman@outokumpu.com
J. Charles
Affiliation:
GM APERAM I-R&D, La Plaine St-Denis, France; e-mail: jacques.charles@aperam.com
Get access

Abstract

One of the key issues in the development of the modern duplex stainless steels was the introduction of nitrogen as an alloying element. This was made possible by e.g. the AOD process and has meant that the problems with earlier grades regarding weldability could be solved. The prime reason for the lower weldability, namely a coarse-grained heat affected zone with inferior properties was then removed. Further beneficial effects of nitrogen increases in the new generation of duplex grades were pointed out: localized corrosion resistance particularly in chloride containing solutions, enhancement of fatigue properties, improved creep properties particularly when considering heat treatment...The paper will outline the influence of nitrogen additions in duplex grades by means of thermodynamic calculations including phase diagrams, TTT phase precipitation diagrams from metallographic investigations, mechanical and corrosion properties. Metallographic investigations, corrosion resistance properties and mechanical properties will be presented. The specific links between welded joints microstructures and properties with different nitrogen contents will be discussed.

Keywords

Duplex stainless steelnitrogenstructurephase diagrammechanical and corrosion resistance propertiesAcier austéno-ferritiquesazotestructurediagrammes de phasepropriétés mécaniquestenue à la corrosion et fatigue
Type
Research Article
Information
Metallurgical Research & Technology , Volume 108 , Issue 7-8 , 2011 , pp. 413 - 425
Copyright
© EDP Sciences 2012

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

Références

K. Osozawa, N. Okato, Effect of alloying elements, especially nitrogen, on the initiation of pitting in stainless steels. Passivity and its breakdown on iron and iron base alloys, USA-Japan Seminar, Honolulu, ACE, Huston, 1976, pp. 135–139
R.F.A Jargelius Petterson, Thesis Royal Institute of Technology, Stockholm, 1998
B. Sundman, B. Jansson, J.-O. Andersson, CALPHAD 9, 1985, pp. 153-190
Chance, Duplex Stainless Steels DSS‘82, ASM, Ed Lula, St Louis, USA
P. Combrade, J.-P. Adouard, Int Conference Duplex Stainless Steels‘91, Beaune, France, Les Editions de Physique, Les Ulis, France, 1991, pp. 257-281
S. Hertzman, E. Symniotis, Int Conf Stainless Steels‘91, June 10–13, Chiba Japan. The Iron and Steel Institute of Japan, 1991, pp. 1085-1092
Pettersson, R.F.A., Mat. Sci. Forum 318-320 (1999) 489-494
P. Hagenfeldt, S. Bernhardsson, S. Lagerberg, High Nitrogen Containing Duplex Stainless Steel Having High Corrosion Resistance and Good Structure Stability, US Pat 4,765,953 Aug 23, 1988
Wessman, S., Hertzman, S., Pettersson, R., Lagneborg, R., Liljas, M., Mat. Sci. Tech. 24 (2008) 348
V.G. Gavriljuk, H. Berns, High Nitrogen Steels, Structure Properties, Manufacture, Applications ISBN 3-540-66411-4, Springer Verlag, Berlin, 1999
Nordberg, Proc Int Conf Innovation in Stainless Steels, Firenze, 1993, p. 2.217
J. Moverare, Microstresses and anisotropic behaviour of duplex stainless steels Thesis, Institute of Technology, Linköpings universitet, 2001, Dissertation No. 699
P. Hedström, Thesis Luleå University of Technology, 2007
G. Wahlberg, G. Dunlop, Int Conf Stainless Steels 87, York, 1987, pp. 291-299
Lillbacka, R., Chai, G., Ekh, M., Johnsson, E., Runesson, K., Acta Materialia 55 (2007) 5359-5368
Foct, J., Akdut, N., Scripta Metallurgica et Materialia 29 (1993) 153-158
Tomota, Y., Yxia, , Inoue, K., Acta Mater. 46 (1998) 1577-1587
V.G. Gavriljuk, Proceedings Inst Conf High Nitrogen Steels 2006, in: H. Dong, M. Speidel (éds.), Jiuzhaigou, Sichuan, China, Metallurgical Industry Press, Beijing, 2006, pp. 3-12
V.G. Gavriljuk, B. Shanina, Proceedings Inst Conf High Nitrogen Steels 2004, in: N. Akdut, B. De Cooman, J. Foct (éds.), Ostend, Belgium, 2004, pp. 29-36
J. Charles, Proceedings 3th Duplex Stainless Steel Beaune 1991, in: J. Charles, S. Bernardsson (éds.), Les Éditions de Physique, pp. 3-48
J. Charles, Proceedings 6th Duplex Stainless Steel, Eds AIM, Venice 2000, pp. 1-12
J. Charles, Duplex Stainless Steels, I. Alvarez-Armas, S. Degallaix-Moreuil (éds.), ISTE Ltd, UK and John Wiley & Sons, Inc, USA, 2009, Chap. 2, pp. 47-114
Thier, H., Bäumel, A., Schmidmann, E., Archiw für das Eisenhüttenwesen 40 (1969) 333-389
Jargelius Pettersson, R., Z. Metallkunde 89 (1998) 177-183
Hertzman, S., ISIJ International 41 (2001) 580-589
S. Hertzman, R. Pettersson, K. Frisk, T. Jerwin, Proc 6th World duplex Conference, Associazione Italiana Di Metallurgia, Venezia, 2000, pp. 347-354
Hertzman, S., Ferreira, P.J., Brolund, B., Metal. Mater. Trans. 28A (1997) 297
Westin, M., Brolund, B., Hertzman, S., Steel Research 79 (2008) 473-481
R. Mundt, H. Hoffmeister, Stainless Steels ’74, International Conference, Gothenburg, Sweden, 1974, 315-322
M. Liljas, R. Qvarfordt, Proc Int Conf DSS ’6, 23-26 (1986) The Hague
B. Bonnefois, J. Charles, F. Dupoiron, P. Soulignac, Proceedings 3th Duplex Stainless Steel Beaune 1991, in: J. Charles, S. Bernardsson (éds.), Les Éditions de Physique, 1991, 347-362
J.-M. Lardon, J. Charles, F. Dupoiron, J.-C. Bavay, Proceedings High Nitrogen Steels, Lille, 1988, pp. 280-287
Fanica, G. Passot, Proceedings 8th Duplex Stainless Steel Beaune 2010, in: J. Charles, Beaune, 2010, Paper II.C.2.
K.J. Blom, Proc Int Conf Stainless Steels ’87, York, 1987
S. Hertzman, B. Roberts, M. Lindenmo, Proc Int Conf DSS ’86, 1986, The Hague, pp. 257-267
R.F.A. Jargelius Pettersson, S. Hertzman, P. Szakalos, P.J. Ferreira, Nordic seminar on Welding of Duplex Stainless Steels, The Swedish Welding Commission, Stockholm, Sweden, 1993
Liao, J., ISJI Int. Iron and Steel Institute of Japan 41 (2001) 460-467
H.L. Cao, S. Hertzman, 3rd Int. Conf. on Duplex Stainless Steels (DSS-91), Beaune, 1991, pp. 363-372
L. Karlsson, S. Pak, S.L. Andersson, Proc Int Conf on Stainless Steels 1991, Chiba, ISIJ, 1991, pp. 1093-1100
S. Hertzman, R.F.A. Jargelius Pettersson, R. Blom, J. Eriksson, E. Kivineva, ISIJ International 36 (1996) pp. 968-976
S. Wessman, S. Hertzman, Stainless Steel World, Duplex America 2000. International Conference, Huston Texas, 2000, p. 335-344
S. Hertzman, S. Wessman, International Conference High Nitrogen Steels HNS 98, in: H. Hänninen, S. Hertzman, J. Romu, Helsingfors and Stockholm (éds.), 1998, pp. 579-590
S. Hertzman, S. Wessman, A. Brorsson, M. Liljas, HNS 04, Proceedings Inst Conf High Nitrogen Steels 2004, in: N. Akdut, B. De Cooman, J. Foct (éds.), Ostend, Belgium, 2004
G. Den Ouden, O. Griebling, Recent trends in Welding Science and Technology, Gatlinburg, 1989, pp. 431-435
T.A. Palmer, T. Debroy, Welding Journal, 1996, pp. 197-207
du Toit, M., Pistorious, P.C., Welding Research Supplement, Welding Journal Part 1 (2003) 219-224 Google Scholar
du Toit, M., Pistorious, P.C., Welding Research Supplement, Welding Journal Part1 (2003) 231-237 Google Scholar
T. Ogawa, T. Koseki, IIW Doc 90, Joining Techn Lab, Nippon Steel Corp, 1990
S. Hertzman, R. Jargelius Pettersson, R. Blom, E. Kivineva, J. Eriksson, Nordic seminar on Welding of Duplex Stainless Steels, The Swedish Welding Commission, Stockholm, Sweden, 1993