Hostname: page-component-78c5997874-xbtfd Total loading time: 0 Render date: 2024-11-14T06:01:02.696Z Has data issue: false hasContentIssue false
  • English
  • Français

Field Emission Scanning Electron Microscopy Studies of Industrial Polymers - A Survey

Published online by Cambridge University Press:  02 July 2020

E.F. Osten  and
M.S. Smith
E.F. Osten
Affiliation:
Corporate Analytical Technology Center, 3M Company, St. Paul, MN55144-1000
M.S. Smith
Affiliation:
Corporate Analytical Technology Center, 3M Company, St. Paul, MN55144-1000
Get access

Extract

We are using the term "Industrial Polymers" to refer to polymers [plastics] that are produced by the ton or (in the case of films) by the mile. For example, in descending order of world-wide use (tonnage), the top eight of these polymers are polyethylene (PE), polyvinyl chloride (PVC), polypropylene (PP), styrene polymers (including polystyrene - PS, and acrylonitrile-butadienestyrene/ styrene-acrylonitrile - ABS/SAN), polyesters (PETP), polyurethane (PU), phenolics and aminoplastics.

Industrial polymers, which have been produced by the millions of tons for the last five decades and are of obvious social and economic importance, have been exhaustively characterized. Structural features which affect physical properties and indicate process variables have been studied by many techniques other than microscopy (x-ray diffraction, thermal analysis, rheology, chromatographies, etc.). Microscopy techniques for polymer characterization have been well documented. Our motivation to apply field emission (high resolution) scanning electron microscopy to the study of polymers is: (1) The application of low voltage, high resolution SEM to biological materials is well characterized.

Type
Developments in Measuring Polymer Microstructures
Information
Microscopy and Microanalysis , Volume 4 , Issue S2: Proceedings: Microscopy & Microanalysis '98, Microscopy Society of America 56th Annual Meeting, Microbeam Analysis Society 32nd Annual Meeting, Atlanta, Georgia July 12-16, 1998 , July 1998 , pp. 814 - 815
Copyright
Copyright © Microscopy Society of America

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1Brydson, J.A., Plastics Materials (1995)11.Google Scholar
2Sawyer, L.C. and Grubb, D.T., Polymer Microscopy (1987).CrossRefGoogle Scholar
3Pawley, J.B., Proceedings of the 45th Annual meeting EMSA (1987)550.Google Scholar
4Joy, D. and Pawley, J., Proceedings of the 49th Annual Meeting EMSA (1991)478.Google Scholar
5 Special Issue On High Resolution FESEM, SCANNING Vol.19, Number 5 (1997).Google Scholar
6Hall, C., Polymer Materials (1989)42.Google Scholar
7Magonov, S.N and Reneker, D.H., Annu. Rev. Mater. Sci. 27(1997)175.CrossRefGoogle Scholar
8Bates, F., CIE INTERFACE Vol.8, N0.2(1995)8.Google Scholar
9Erlandsen, S.L., et al, Microscopy and Microanalysis Vol.3, Supp 2(1997)1231.CrossRefGoogle Scholar