Hostname: page-component-cd9895bd7-jn8rn Total loading time: 0 Render date: 2024-12-28T12:55:10.935Z Has data issue: false hasContentIssue false
  • English
  • Français

In Vitro Behavior and Surface Morphology of Modified 316L Stainless Steel Stents

Published online by Cambridge University Press:  03 October 2008

J. Nunes ,
A.P. Piedade ,
C.B. Duarte  and
M.T. Vieira
J. Nunes
Affiliation:
ICEMS-Department of Mechanical Engineering, University of Coimbra, Rua Luís Reis Santos, 3030-788 Coimbra, Portugal.
A.P. Piedade
Affiliation:
ICEMS-Department of Mechanical Engineering, University of Coimbra, Rua Luís Reis Santos, 3030-788 Coimbra, Portugal.
C.B. Duarte
Affiliation:
Department of Zoology, University of Coimbra, Largo Marquês de Pombal, 3004-517 Coimbra, Portugal
M.T. Vieira
Affiliation:
ICEMS-Department of Mechanical Engineering, University of Coimbra, Rua Luís Reis Santos, 3030-788 Coimbra, Portugal.

Abstract

Core share and HTML view are not available for this content. However, as you have access to this content, a full PDF is available via the ‘Save PDF’ action button.

When compared with conventional bare metal stents, such as 316L stainless steel, the introduction of drug-eluting stents can promote reduction in the incidence of in-stent restenosis. However, the chemical discrepancy between the metallic stent and the polymeric material that acts as the reservoir for the drug is responsible for some problems during the cardiovascular surgery. Besides the research work aiming at the development of new bulk alloys for stent production, focus as been also directed to the surface modification of these devices. However, the use of functional graded coatings (FGC), i.e., coatings with a gradient of chemical composition between the substrate and the outmost layer, has never been reported in devices for cardiovascular surgery.

Type
Abstract
Information
Microscopy and Microanalysis , Volume 14 , Supplement S3 , September 2008 , pp. 35 - 36
Copyright
Copyright © Microscopy Society of America 2008