Hostname: page-component-78c5997874-v9fdk Total loading time: 0 Render date: 2024-11-14T05:08:14.541Z Has data issue: false hasContentIssue false
  • English
  • Français

Small Cracks and the Transition to Long Cracks

Published online by Cambridge University Press:  29 November 2013

W.L. Morris  and
M.R. James
Get access

Extract

The propagation of small fatigue cracks differs considerably from that of long cracks in the same material. Small cracks tend to grow more rapidly than would be expected from long-crack data. Following Suresh and Ritchie, cracks are small when (1) their length is small compared to the scale of local plasticity (a linear elastic fracture mechanics, LEFM, limitation); (2) their length is small compared to microstructural dimensions (a continuum mechanics limitation); or (3) they are merely physically small. The importance of understanding the anomalously rapid growth of small cracks has been the subject of recent reviews and two specialized conferences. The impact of small cracks on component design is to force the design of highly conservative structures.

Many investigators have tried to correct LEFM to account for crack shortness. Since the early work of Kitagawa and Takahashi and Smith showing the limitations of LEFM, many procedures to modify, correct, or replace LEFM have been proposed to predict short-crack growth rates. These include mechanisms based on crack closure stress and crack deflection, elastic-plastic approaches such as the J integral, or simply semi-empirical approaches. These methods have been reasonably successful when the crack length is a few times that of the relevant micro-structural size.

Type
Crack Formation and Propagation
Information
MRS Bulletin , Volume 14 , Issue 8 , August 1989 , pp. 18 - 24
Copyright
Copyright © Materials Research Society 1989

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1.Suresh, S. and Ritchie, R.O., Int. Metals Rev. 29 (1984) p. 445–476.Google Scholar
2.Hudak, S.J., Trans. ASME 103 (1981) p. 26–34.Google Scholar
3.Schijve, J., Difference Between the Growth of Small and Large Fatigue Cracks, Report LR-327, Delft, the Netherlands, July 1981.Google Scholar
4.Miller, K.J., Fat. Eng. Mater, and Struct. 5 (1982) p. 223–232.CrossRefGoogle Scholar
5.Leis, B.N., Kanninen, M.F., Hopper, A.T., Ahmed, J., and Broek, D., A Critical Review of the Short Crack Problem in Fracture, AFWAL-TR-83-4018, Materials Laboratory, Air Force Wright Aeronautical Laboratories (1983); see also Leis et al., Eng. Fracture Mech. 23 (1986) p. 883-898.Google Scholar
6.Fatigue Mechanisms: Advances in Quantitative Measurements of Physical Damage, ASTM STP 811, edited by Lankford, J., Davidson, D.L., Morris, W.L., and Wei, R.P. (Am. Soc. for Testing and Mater., 1983).CrossRefGoogle Scholar
7.Small Fatigue Cracks, edited by Ritchie, R.O. and Lankford, L. (TMS-AIME, Warrendale, PA) 1986.Google Scholar
8.Kitagawa, H. and Takahashi, S. in Proc. 2nd Intl. Conf. on Mechanical Behavior of Materials, Boston, MA (1976) p. 627–631.Google Scholar
9.Smith, R.A., Int. J. Fracture 13 (1977) p. 717–720.CrossRefGoogle Scholar
10.Tanaka, K., Nakai, Y. and Yamashita, M., Int. J. Fracture 17 (1981) p. 519–531.CrossRefGoogle Scholar
11.Chan, K.S. and Lankford, J., Scripta Met. 17 (1983) p. 529–532.CrossRefGoogle Scholar
12.Navarro, A. and de Los Rios, E.R., Fat. Eng. Mater. Struct. 11 (1988) p. 383–396.CrossRefGoogle Scholar
13.Frost, N.E., Proc. Inst. Mech. Eng. 173 (1959) p. 811–835.CrossRefGoogle Scholar
14.Pearson, S., Eng. Fracture Mech. 7 (1975) p. 235–247.CrossRefGoogle Scholar
15.James, M.R. and Morris, W.L. in Residual Stress for Designers and Metallurgists (ASM, 1981) p. 169–188.Google Scholar
16.Tomkins, B., Met. Sci. 6 (1980) p. 408–417.CrossRefGoogle Scholar
17.Chang, R., Morris, W.L., and Buck, O., Scripta Met. 13 (1979) p. 191–194.CrossRefGoogle Scholar
18.James, M.R. and Morris, W.L. in Small Fatigue Cracks, edited by Ritchie, R.O. and Lankford, J. (TMS-AIME, Warrendale, PA, 1986) p. 145–156.Google Scholar
19.Morris, W.L., Cox, B.N., and James, M.R., Acta. Met. 35 (1987) p. 1055–1065.CrossRefGoogle Scholar
20.Cox, B.N., Morris, W.L., and James, M.R., Acta. Met. 35 (1987) p. 1289–1300.CrossRefGoogle Scholar
21.Lankford, J. and Davidson, D.L. in Fatigue Crack Growth Threshold Concepts, edited by Davidson, D.L. and Suresh, S. (TMS-AIME, Warrendale, PA, 1984) p. 447–463.Google Scholar
22.Hudak, S.J., Davidson, D.L., Chang, K.S., Howland, A.C., and Walsch, M.J., Growth of Small Cracks in Aeroengine Disc Materials, Report AFWAL-TR-88-4090, WPAFB (June 1988).CrossRefGoogle Scholar
23.Zurek, A.K., James, M.R., and Morris, W.L., Met. Trans. 14A (1983) p. 1697–1703.CrossRefGoogle Scholar
24.Cox, B.N., Pardee, W.J., and Morris, W.L., Fat. Eng. Mater. Struct. 9 (1987) p. 435–455.CrossRefGoogle Scholar
25.Pardee, W.J., Morris, W.L., Cox, B.N., and Hughes, B. D., Defects, Fracture and Fatigue, edited by Sih, G.C. and Koran, J.W. (Martinas Nijhoff Pub., 1982) p. 99–111.Google Scholar
26.Cox, B.N. and Morris, W.L., Eng. Fracture Mech. 31 (1988) p. 591–610.CrossRefGoogle Scholar
27.Morris, W.L. and James, M.R. in Fatigue Mechanisms: Advances in Quantitative Measurements of Physical Damage, ASTM STP 811, edited by Lankford, J., Davidson, D.L., Morris, W.L., and Wei, R.P. (Am. Soc. for Testing and Mater., 1983) p. 179–206.CrossRefGoogle Scholar
28.Cox, B.N. and Morris, W.L., Fatigue Eng. Mater. Struct. 10 (1987) p. 419–428.CrossRefGoogle Scholar
29.James, M.R. and Garr, K., “The Growth of Short Fatigue Cracks in DS Mar-M-246,” submitted to Scripta Met.Google Scholar
30.Morris, W.L., Inman, R.V., and Pardee, W.J., Novel NDE Methods for Materials (TMS-AIME, Warrendale, PA, 1982) p. 119–129.Google Scholar
31.Morris, W.L., Frandsen-Richards, R.J., Elsley, R.K., Inman, R.V., James, M.R., and Zurek, A.K., J. Nondestructive Eval. 3 (1982) p. 189–200.CrossRefGoogle Scholar
32.Larsen, J.M. in Fracture Mechanics: Seventeenth Volume, ASTM STP 905, edited by Underwood, E.E., et al. (Am. Soc. Testing and Mater., 1986) p. 226–238.CrossRefGoogle Scholar
33.Cox, B.N. and Morris, W.L., Fatigue 87 (1987) p. 241–250.Google Scholar
34.Cox, B.N. and Morris, W.L., Fat. Eng. Mater. Struct. 10 (1987) p. 429–446.CrossRefGoogle Scholar
35.Newman, J.C., Swain, M.H., and Phillips, E.P. in Small Fatigue Cracks, edited by Ritchie, R.O. and Lankford, J. (TMS-AIME, Warrendale, PA, 1986) p. 427–452.Google Scholar
36.Newman, J.C. and Raju, I.S., Eng. Fracture Mech. 15 (1981) p. 185–192.CrossRefGoogle Scholar
37.Morris, W.L., Met. Trans. 11A (1980) p. 1117–1123.CrossRefGoogle Scholar
38.James, M.R. and Morris, W.L., Met Trans. 14A (1983) p. 153–155.CrossRefGoogle Scholar
39.Sharpe, W.N., Optical Eng. 21 (1982) p. 483–488.CrossRefGoogle Scholar
40.Lee, J.J. and Sharpe, W.N. in Small Fatigue Cracks, edited by Ritchie, R.O. and Lankford, J. (TMS-AIME, Warrendale, PA, 1986) p. 323–339.Google Scholar
41.Lee, J.J. and Larsen, J.M., Nicholas, T., Thompson, A.W., and Williams, J.C., p. 499–512.Google Scholar
42.Davidson, D.L. and Lankford, J., Fat. Eng. Mater, and Struct. 3 (1981) p. 289–303.CrossRefGoogle Scholar
43.Davidson, D.L. and Lankford, J. in Small Fatigue Cracks, edited by Ritchie, R.O. and Lankford, J. (TMS-AIME, Warrendale, PA, 1986) p. 455–471.Google Scholar
44.Morris, W.L., James, M.R. and Zurek, A.K., Scripta Met. 19 (1985) p. 149–153.CrossRefGoogle Scholar
45.James, M.R., Morris, W.L., and Cox, B.N., “A High Accuracy Automated Strain Field Mapper,” submitted to Expt. Mech.Google Scholar
46.Haddad, M.H. El, Smith, K.N., and topper, T.H., Trans. ASME 101 (1979) p. 42–46.Google Scholar
47.Taira, S., Tanaka, K. and Nakai, Y., Mech. Res. Comm. 5 (1978) p. 375–381.CrossRefGoogle Scholar
48.Lankford, J., Fat. Eng. Mater. Struct. 8 (1985) p. 161–175.CrossRefGoogle Scholar
49.Tokaji, K. and Ogawa, T., Fat. Eng. Mater. Struct. 11 (1988) p. 331–342.CrossRefGoogle Scholar
50.Mazur, C.J. and Rudd, J.L., Proc. IVth International Congress on Experimental Mechanics (SEM, 1988) p. 850–857.Google Scholar
51.James, M.R., Morris, W.L., and Zurek, A.K., Fat. Eng. Mater. Struct. 6 (1983) p. 293–305.CrossRefGoogle Scholar
52.Phillips, E.P. and Newman, J.C. Jr., Proc. IVth International Congress oh Experimental Mechanics (SEM, 1988) p. 602–609.Google Scholar