Hostname: page-component-745bb68f8f-5r2nc Total loading time: 0 Render date: 2025-01-15T00:30:07.651Z Has data issue: false hasContentIssue false
  • English
  • Français

Adhesion Between Polyimide Films and A12O3 Substrate

Published online by Cambridge University Press:  15 February 2011

Y. Nakamura ,
Y. Suzuki ,
Y. Watanabe  and
S. Hirayama
Y. Nakamura
Affiliation:
Department of Materials Science and Engineering, National Defense Academy 1-10-20 Hashirimizu, Yokosuka, Kanagawa 239, Japan
Y. Suzuki
Affiliation:
Department of Materials Science and Engineering, National Defense Academy 1-10-20 Hashirimizu, Yokosuka, Kanagawa 239, Japan
Y. Watanabe
Affiliation:
Department of Materials Science and Engineering, National Defense Academy 1-10-20 Hashirimizu, Yokosuka, Kanagawa 239, Japan
S. Hirayama
Affiliation:
Department of Materials Science and Engineering, National Defense Academy 1-10-20 Hashirimizu, Yokosuka, Kanagawa 239, Japan
Get access

Abstract

The adhesive strength of polyimide thin films on an alumina substrate has been studied by the pull test. Polyimide thin films were cured at various temperatures from 300 to 400°C, followed by etching in an oxygen plasma for 3 min. After metallization with chromium and copper, the pull test was carried out. It is found that the adhesive strength increases with an increase of the cure temperature. However the strength deteriorates noticeably at the cure temperature of 400°C. A possible reason for this is the variation of chemical states in the polyimide thin films.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 385: Symposium N – Polymer/Inorganic Interfaces II , 1995 , 91
Copyright
Copyright © Materials Research Society 1995

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

[1] McBride, Robert R., Zarnow, David F., and Brown, Raymond L., Advancing Microelectronics, 21, 16(1994).Google Scholar
[2] You, Ming-Shyong, Sanjoh, A., and Ikeda, T., Proc. of 8th Int'l. Microelectronics Conf, Ohmiya, (1994)pp.443–448.Google Scholar
[3] Ishi, Masahito and Hata, Hiroshi, Proc. of 8th Int'l. Microelectronics Conf, Ohmiya, (1994)pp. 225–230.Google Scholar
[4] Jeong, Hyo-Soo, Chu, Y. Z., Durning, C. J., and White, R. C., Surface and Interface Analysis, 18, 289(1992).Google Scholar
[5] Davis, G. D., Rees, B. J., and Whisnant, P. L., J. Vac. Sci. Technol. A, 12, 2378(194).Google Scholar