Hostname: page-component-78c5997874-dh8gc Total loading time: 0 Render date: 2024-11-10T12:11:48.700Z Has data issue: false hasContentIssue false
  • English
  • Français

An AFM Study of The Effect of Growth Method and Conditions on The Microstructure of A-Si:H

Published online by Cambridge University Press:  15 February 2011

Daewon Kwon ,
J. David Cohen  and
Ricardo Garcia
Daewon Kwon
Affiliation:
University of Oregon, Department of Physics, Eugene, OR 97403
J. David Cohen
Affiliation:
University of Oregon, Department of Physics, Eugene, OR 97403
Ricardo Garcia
Affiliation:
Instituto de Microelectronica de Madrid, CSIC, Isaac Newton 8, 28760 Tres Cantos (Madrid), SPAIN
Get access

Abstract

We utilized atomic force microscopy (AFM) to investigate the microstructure at the surface of thick (>4000 Å) hydrogenated amorphous silicon films. The films were prepared by standard glow discharge (GD) as well as hot wire chemical vapor deposition (HWCVD) techniques. We studied a series of films with substrate temperatures ranging between 200 °C and 400 °C. We also studied the effects of various gas mixtures at fixed growth temperature on the observed microstructure. We found that the average feature grain size in the micro structure varied between 40 nm and 90 nm as the substrate temperature was changed and also as the different gas mixtures were employed during growth. The grain size decreased with increasing substrate temperatures for the films grown from 100 % silane independent of whether the growth method were GD or HWCVD. Gas dilution with argon or hydrogen also resulted in a size reduction, as did PH3 doping at dilute levels. These results rule out the possibilities that the observed features arise from particle production in the reactor chamber itself. The relation of the observed micro structure to the electronic properties of a-Si:H is discussed.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 467: Symposium A – Amorphous and Microcrystalline Silicon Technology - 1997 , 1997 , 561
Copyright
Copyright © Materials Research Society 1997

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Knights, J. C. and Rujan, R. A., Appl. Phys. Lett. 35, 244 (1979)Google Scholar
2. Reimer, J. A., Vaughan, R. W., and Knights, J. C., Phys. Rev. Lett. 44, 193 (1980)Google Scholar
3. Baum, J., Gleason, K. K., Pines, A., Garroway, A. N., and Reimer, J. A., Phys. Rev. Lett. 56, 1377 (1986)Google Scholar
4. Boyce, J. B., and Ready, S. E., Physica B 170, 305 (1991)Google Scholar
5. Mahan, A. H., Williamson, D. L., Nelson, B.P., and Crandall, R. S., Phys. Rev. B 40, 12024 (1989)Google Scholar
6. Williamson, D. L., Mahan, A. H., Nelson, B. P., and Crandall, R. S., Appl. Phys. Lett. 55, 783 (1989)Google Scholar
7. Guha, S., Yang, J., Jones, S. J., Chen, Y., and Williamson, D. L., Appl. Phys. Lett. 55, 783 (1989)Google Scholar
8. Stutzin, G. C., Ostrom, R. M., Gallagher, A., and Tanenbaum, D. M., J. Appl. Phys. 74, 91 (1993)Google Scholar
9. McKinnon, A. W., Baker, S., and Weiland, M. E., J. Non-Cryst. Solids 139, 157 (1992)Google Scholar
10. Ikuta, K., Yamasaki, S., Miki, K., and Matsuda, A., Appl. Phys. Lett. 65, 1760 (1994)Google Scholar
11. Wanka, H. N., Hierzenberger, A., and Schubert, M. B., Mat. Res. Soc. Proc. 377, 263 (1995)Google Scholar
12. Tanenbaum, D. M., Laracuente, A. L., and Gallagher, A., Appl. Phys. Lett. 68, 1705 (1996)Google Scholar
13. Williamson, D. L., Mat. Res. Soc. Proc. 377, 251 (1995)Google Scholar
14. Mahan, A. H., Chen, Y., Williamson, D. L., and Mooney, G. D., J. Non-Cryst. Solids, 137&138, 65 (1991)Google Scholar