Hostname: page-component-cd9895bd7-gvvz8 Total loading time: 0 Render date: 2024-12-28T20:02:55.972Z Has data issue: false hasContentIssue false

Opto-electrical characterization and X-ray Mapping of large-volume cadmium zinc telluride radiation detectors

Published online by Cambridge University Press:  31 January 2011

Ge Yang
Affiliation:
gyang@bnl.gov, Brookhaven National Laboratory, Building 197D, Brookhaven National Laboratory, Upton, New York, 11973, United States, 6313444341
Aleksey E Bolotnik
Affiliation:
bolotnik@bnl.gov, Brookhaven National Laboratory, Upton, New York, United States
Giuseppe Camarda
Affiliation:
Giuseppec@bnl.gov, Brookhaven National Laboratory, Upton, New York, United States
Yonggang Cui
Affiliation:
ycui@bnl.gov, Brookhaven National Laboratory, Upton, New York, United States
Anwar Hossain
Affiliation:
hossain@bnl.gov, Brookhaven National Laboratory, Upton, New York, United States
Walter Yao
Affiliation:
hwyao@bnl.gov, Brookhaven National Laboratory, Upton, New York, United States
Ki Hyun Kim
Affiliation:
khkim@bnl.gov, Brookhaven National Laboratory, Upton, New York, United States
Ralph James
Affiliation:
rjames@bnl.gov, Brookhaven National Laboratory, Upton, New York, United States
Get access

Abstract

Large-volume cadmium zinc telluride (CZT) radiation detectors would greatly improve radiation detection capabilities and, therefore, attract extensive scientific and commercial interests. CZT crystals with volumes as large as hundreds of centimeters can be achieved today due to improvements in the crystal growth technology. However, the poor performance of large-volume CZT detectors is still a challenging problem affecting the commercialization of CZT detectors and imaging arrays. We have employed Pockels effect measurements and synchrotron X-ray mapping techniques to investigate the performance-limiting factors for large-volume CZT detectors. Experimental results with the above characterization methods reveal the non-uniform distribution of internal electric field of large-volume CZT detectors, which help us to better understand the responsible mechanism for the insufficient carrier collection in large-volume CZT detectors.

Type
Research Article
Copyright
Copyright © Materials Research Society 2009

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. James, R. B. Schlesinger, T. E. Lund, J. C. and Schieber, M. Semiconductors for Room Temperature Nuclear Detector Applications, Academic Press, New York, 1995, Vol. 43, p. 334.Google Scholar
2. Doty, F. P. Butler, J. F. Schetzina, J. F. and Bowers, K. A. J. Vac. Sci. Technol. B10, 1418 (1992).Google Scholar
3. Yang, G. Bolotnikov, A. E. Cui, Y. Camarda, G. S. Hossain, A. and James, R. B. J. Cryst. Growth 311, 99 (2008).Google Scholar
4. Guenther, R. Modern Optics (New York: John Wiley & Sons, Inc., 1990), pp. 569590.Google Scholar
5. Yao, H. W. Anderson, R. J. and James, R. B. Proc. SPIE 3115, 62 (1997).Google Scholar
6. Cola, A. Farella, I. Mancini, A. M. and Donati, A.Electric Field Properties of CdTe Nuclear Detectors”, IEEE Trans. Nucl. Sci. 54, 868 (2007).Google Scholar