Hostname: page-component-745bb68f8f-mzp66 Total loading time: 0 Render date: 2025-01-15T07:15:14.290Z Has data issue: false hasContentIssue false
  • English
  • Français

Precipitation of Nanoscale Hydrous Alumina from Sodium Aluminate Solutions

Published online by Cambridge University Press:  17 March 2011

Biman Das ,
Mats Graeffe ,
Alicia Toscano ,
Chris Brancewicz  and
Don H. Rasmussen
Biman Das
Affiliation:
Department of Physics, State University of New York, Potsdam, New York, 13676
Mats Graeffe
Affiliation:
Department of Physical Chemistry, Åbo Akademi, Finland
Alicia Toscano
Affiliation:
Department of Chemical Engineering, Clarkson University, Potsdam, New York, 13699
Chris Brancewicz
Affiliation:
Department of Chemical Engineering, Clarkson University, Potsdam, New York, 13699
Don H. Rasmussen
Affiliation:
Department of Chemical Engineering, Clarkson University, Potsdam, New York, 13699
Get access

Abstract

Sodium aluminate liquor was diluted and neutralized with water and oxalic acid in the presence of surface-active polymers polyvinylpyrrolidone (PVP), polyvinyl alcohol (PVA) and sodium carboxymethylcellulose (NaCMC). Dynamic light scattering experiments showed that the final precipitate had diameters between 80 – 300 nm when precipitated in the presence of PVP, and 600 – 800 nm when precipitated in the presence of NaCMC. The initial sols prepared using oxalic acid without surfactant had diameters of 200 – 300 nm. Scanning Electron Microscopy, SEM, Energy Dispersive Analysis by X-rays, EDAX, and X-ray diffraction were used for imaging, chemical and structural analysis of the final dialyzed particles. Transmission Electron Microcopy, TEM, images of the sols trapped and dried between nitrocellulose membranes showed that the initial particles were nearly spherical and bimodal in particle size. Larger particles had diameter of about 176 nm but were not pure solid alumina. A small fraction of initial particles had diameters much smaller than 176 nm. The discrepancies between initial and final precipitates indicate a complex precipitation pathway.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 704: Symposium W – Nanoparticulate Materials , 2001 , W6.20.1
Copyright
Copyright © Materials Research Society 2002

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Wefers, K. and Misra, C., Oxides and Hydroxides of Aluminum, Alcoa Laboratories Technical Paper 19 (1987); E.A. Kirke.; Chemical Engineering in Australia, ChE7, No. 1, 35 (1982).Google Scholar
2. Misra, C. and White, E.T., Chemical Engineering Progress Symposium Series, 67 (110), 53 (1971).Google Scholar
3. Addai-Mensah, J., Minerals Engineering, 10, 81 (1997).Google Scholar
4. Harris, D., Prestidge, C., Thomas, J. and Keir, R.A.,. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 15, 343 (1999).Google Scholar
5. Zambo, J., Proceedings Light Metals Vol 2, 1986.Google Scholar
6. Counter, J., Gerson, A. and Ralston, J., Colloids and Surfaces A: Physicochemical and Engineering Aspects, 126, 103 (1997).Google Scholar
7. Counter, J., Addai-Mensah, J. and Ralston, J., Colloids and Surfaces A: Physiochemical and Engineering Aspects, 154, 389 (1999).Google Scholar
8. Addai-Mensah, J., Dawe, J., Hayes, R., Prestidge, C. and Ralston, J., J. Colloid and Interface Sci., 203, 115 (1998).Google Scholar
9. Addai-Mensah, J., Prestidge, C.A. and Ralston, J., Minerals Engineering, 12, 655 (1999).Google Scholar