Hostname: page-component-78c5997874-lj6df Total loading time: 0 Render date: 2024-11-10T11:50:46.818Z Has data issue: false hasContentIssue false
  • English
  • Français

Silver Patterning by Reactive Ion Beam Etching forMicroelectronics Application

Published online by Cambridge University Press:  17 March 2011

L. Gao ,
J. Gstoettner ,
R. Emling ,
P. Wang ,
W. Hansch  and
D. Schmitt-Landsiedel
L. Gao
Affiliation:
Institute for Technical Electronics, Technical University Munich D-80333, Munich, Germany
J. Gstoettner
Affiliation:
Institute for Technical Electronics, Technical University Munich D-80333, Munich, Germany
R. Emling
Affiliation:
Institute for Technical Electronics, Technical University Munich D-80333, Munich, Germany
P. Wang
Affiliation:
Institute for Technical Electronics, Technical University Munich D-80333, Munich, Germany
W. Hansch
Affiliation:
Institute for Technical Electronics, Technical University Munich D-80333, Munich, Germany
D. Schmitt-Landsiedel
Affiliation:
Institute for Technical Electronics, Technical University Munich D-80333, Munich, Germany
Get access

Abstract

Dry etching of silver for the metallization in microelectronics isinvestigated. Etching is performed using an electron-cyclotron-resonancereactive-ion-beam-etching system (ECR-RIBE) in an Ar/CF4 or Ar/CF4/O2 mixture. The etch characteristics arestrongly affected by ion energy (beam voltage and microwave energy); the O2 concentration in the reactive mixture has only a smalleffect. An anisotropic, smooth etch profile and clean surface are obtained.Focused ion beam (FIB) and atomic force microscopy (AFM) have been used tostudy the etched profile and the roughness, respectively.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 812: Symposium F – Materials, Technology and Reliability for Advanced Interconnects and Low-k Dielectrics-2004 , 2004 , F3.19
Copyright
Copyright © Materials Research Society 2004

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1.International Technology Roadmap for Semiconductors, Semiconductor Industry Association, (2003).Google Scholar
2. Venkatesan, S. et al. , Techn. Digest Int. Electron Devices Meeting, 31, 769 (1997).CrossRefGoogle Scholar
3. Edelstein, D. et al. , Techn. Digest Int. Electron Devices Meeting, 31, 773 (1997).CrossRefGoogle Scholar
4. Manepalli, R., Stepniak, F., Bidstrup-Allen, S.A., Kohl, P., IEEE Trans. Adv. Pack. 22, 4 (1999).CrossRefGoogle Scholar
5. Hauder, M., Gstoettner, J., Hansch, W., Schmitt-Landsiedel, D., Sensors and Actuators A 99, 137 (2002).CrossRefGoogle Scholar
6. Zeng, Y., Chen, L., Zou, Y.L., Nguyen, P.A., Hansen, J.D. and Alford, T.L., Mater. Chem. Phys., 66, 77 (2000).CrossRefGoogle Scholar
7. Hauder, M., Gstoettner, J., Hansch, W., Schmitt-Landsiedel, D., Microelectro. Eng. 60, 51 (2002).CrossRefGoogle Scholar
8. Hauder, M., Gstoettner, J., Hansch, W., Schmitt-Landsiedel, D., App. Phys. Lett. 78, 838 (2001).CrossRefGoogle Scholar
9. Hahn, Y.B., Lee, J.W. et al. , J. Vac. Sci. Technol. B 17, 366 (1999).CrossRefGoogle Scholar
10. Dutta, A.K., J. Vac. Sci. Technol. B 13, 1456 (1995).CrossRefGoogle Scholar
11. Bertz, A., Werner, T., Applied Surface Science 91, 147 (1995).CrossRefGoogle Scholar
12. Pearton, S.J., Lee, J.W. et al. , J. Vac. Sci. Technol. B 14, 118 (1996).CrossRefGoogle Scholar
13. Barr, D. L., Harriot, L. R., Brown, W. L., J. Vac. Sci. Technol. B 10, 3120 (1992).CrossRefGoogle Scholar