Article contents
The Basalt/Water System: Considerations for a Nuclear Waste Repository
Published online by Cambridge University Press: 25 February 2011
Abstract
High-level nuclear Waste emplaced in a repository in basalt will lead to elevated temperatures and chemical reactions between the basalt and repository groundwater. The resultant changes in groundwater chemistry and the formation of secondary minerals will affect radionuclide release rates from the repository. In this study, Grande Ronde Basalt and synthetic groundwater were reacted at temperatures of 100°, 150°, and 300°C at a pressure of 30 MPa. Dickson-type sampling autoclaves were used to follow solution composition changes with time. Solution PH remained weakly alkaline, while steady state concentrations of F-, Cl-, SO4-2, and total Carbon were similar to or lower than initial values. Alteration assemblages at 300°C included silica, zeolites, potassium feldspar, and iron smectite. These assemblages are metastable, and prediction of alteration in the basalt and packing material depends on “accelerated” tests results and must be supplemented by study of metastable assemblages in natural analog systems and by tests in open systems with varying flow rates. Experimental data are consistent with rapid adjustment of Eh to reducing values; however, more work on reaction rates and buffering capacity is in progress.
- Type
- Research Article
- Information
- Copyright
- Copyright © Materials Research Society 1984
References
REFERENCES
- 1
- Cited by