Hostname: page-component-cd9895bd7-hc48f Total loading time: 0 Render date: 2024-12-28T22:31:20.140Z Has data issue: false hasContentIssue false
  • English
  • Français

Behaviour under Explosive Loading of Concrete Reinforced with Polymer Grids

Published online by Cambridge University Press:  25 February 2011

B. Hobbs ,
A. J. Watson  and
P. N. Oldroyd
B. Hobbs
Affiliation:
Department of Civil and Structural Engineering, University of Sheffield, U.K.
A. J. Watson
Affiliation:
Department of Civil and Structural Engineering, University of Sheffield, U.K.
P. N. Oldroyd
Affiliation:
Department of Civil and Structural Engineering, University of Sheffield, U.K.
Get access

Abstract

The characteristic of a new form of high strength polymer grid are outlined and its possible uses as reinforcement in concrete subjected to dynamic loading are discussed. Details are given of a test programme in which concrete slabs reinforced with a range of grid types in various configurations have been subjected to explosive loading from contact charges of plastic explosive. A range of both transient and post-test measurements were taken. Results are presented showing how the various damage parameters measured vary with the position and number of polymer grids used in the slabs. The results of the transient measurements are used to suggest mechanisms for damage formation. It is concluded that these polymer grids are effective in restraining explosively generated damage in concrete slabs and that in many circumstances their light weight and their inherent resistance to normal corrosion processes may give them significant advantages over conventional steel reinforcement.

Type
Articles
Information
MRS Online Proceedings Library (OPL) , Volume 64: Symposium S – Cement-Based Composites: Strain Rate Effects on Fracture , 1985 , 235
Copyright
Copyright © Materials Research Society 1986

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Ford, Sir Hugh, in Proceedings of Symposium on Polymer Grid Reinforcement in Civil Engineering, (Institution of Civil Engineers, London, March 1984), Paper 1.1.Google Scholar
2. McGowan, A. et al. , Proceedings of Symposium on Polymer Grid Reinforcement in Civil Engineering, (Institution of Civil Engineers, London, March 1984), Paper 1.2.Google Scholar
3. Watson, A.J., Hobbs, B., Oldroyd, P.N., Proceedings of Symposium on Polymer Grid Reinforcement in Civil Engineering, (Institution of Civil Engineers, London, March 1984), Paper 7.2.Google Scholar
4. Watson, A.J. and Sanderson, A.J., in Proceedings of the Second Conference on the Mechanical Properties of Materials at High Rates of Strain, (Institute of Physics, Oxford, 28–30 March 1979.)Google Scholar