Hostname: page-component-78c5997874-g7gxr Total loading time: 0 Render date: 2024-11-13T14:37:57.315Z Has data issue: false hasContentIssue false
  • English
  • Français

Characterization of (La0.9Sr0.1)0.95Cr0.85Mg0.1Ni0.05O3 Perovskite Ceramics for a Perovskite Related Membrane Reactor

Published online by Cambridge University Press:  26 February 2011

Rachel Rosten ,
Matthew Swanson ,
Jakob Kuebler ,
Jayanta Kapat  and
Nina Orlovskaya
Rachel Rosten
Affiliation:
rcrosten@mtu.edu, Michigan Technological University, Department Of Materials Science and Engineering, 1400 Townsend Dr, Houghton, MI, 49931, United States
Matthew Swanson
Affiliation:
mmswanso@mtu.edu, Michigan Technological University, Department of Materials Science and Engineering, Houghton, MI, 49931, United States
Jakob Kuebler
Affiliation:
jakob.kuebler@empa.ch, EMPA - Material Science & Technology, Duebendorf, N/A, Switzerland
Jayanta Kapat
Affiliation:
jkapat@pegasus.cc.ucf.edu, University of Central Florida, Department of Mechanical, Materials, and Aerospace Engineering, Orlando, FL, 32816, United States
Nina Orlovskaya
Affiliation:
norlovsk@mtu.edu, University of Central Florida, Department of Mechanical, Materials, and Aerospace Engineering, Orlando, FL, 32816, United States
Get access

Abstract

In this research we investigated the sintering behavior of (La0.9Sr0.1)0.95Cr0.85Mg0.1Ni0.05O3 perovskite which is a potential candidate material for enhancing the oxidation reactions in oxygen separation and syngas production. It was found that solid state sintering occurs as a single step event and it was possible to produce gas tight ceramics after using cold isostatic pressing followed by sintering at 1700°C in air. Grain size, porosity, and lattice parameter measurements of the presureless sintered ceramics were performed as a function of sintering temperature. A small amount of secondary phases was also detected by XRD and EDS analysis.

Keywords

ceramiccatalyticsintering
Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 972: Symposium AA – Solid-State Ionics—2006 , 2006 , 0972-AA02-07
Copyright
Copyright © Materials Research Society 2007

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Mori, M., Hiei, Y., Sammes, N., Solid State Ionics, 135, 743–748, 2000.Google Scholar
2. Fergus, J., Solid State Ionics, 171, 1–15, 2004.Google Scholar
3. Shu, W., Deevi, S., Materials Science and Engineering A, 348, 227–243, 2003.Google Scholar
4. Mori, M., Yamamoto, T., Ichikawa, T., Takeda, Y., Solid State Ionics, 148, 93–101, 2002.Google Scholar
5. Carter, J., Nasrallah, M., Anderson, H., Journal of Materials Science, 31, 157–163, 1996.Google Scholar
6. Sakai, N., Kawada, T., Yokokawa, H., Dokiya, M., Iwata, T., Journal of Materials Science, 148, 93–101, 1990.Google Scholar
7. Rosten, R., Koski, M., Koppana, E., Journal of Undergraduate Materials Research, 2, 38–41, 2006.Google Scholar
8. Simners, S., Hardy, J., Stevenson, J., Armstrong, T., Journal of Materials Science, 34, 5721–5732, 1999.Google Scholar