Hostname: page-component-cd9895bd7-hc48f Total loading time: 0 Render date: 2024-12-29T14:00:46.528Z Has data issue: false hasContentIssue false
  • English
  • Français

Impact Properties of Hot-Worked Gamma Alloys with BCC β-Ti Phase

Published online by Cambridge University Press:  26 February 2011

Kentaro Shindo ,
Toshimitsu Tetsui ,
Toshiro Kobayashi ,
Shigeki Morita ,
Satoru Kobayashi  and
Masao Takeyama
Kentaro Shindo
Affiliation:
Nagasaki R&D Center, Mitsubishi Heavy Industries Ltd., 5–717–1 Fukahori-Machi, Nagasaki, 851–0392, JAPAN
Toshimitsu Tetsui
Affiliation:
Nagasaki R&D Center, Mitsubishi Heavy Industries Ltd., 5–717–1 Fukahori-Machi, Nagasaki, 851–0392, JAPAN
Toshiro Kobayashi
Affiliation:
Nagasaki R&D Center, Mitsubishi Heavy Industries Ltd., 5–717–1 Fukahori-Machi, Nagasaki, 851–0392, JAPAN
Shigeki Morita
Affiliation:
Dept. of Production Systems Engineering Toyohashi University of Technology, 1–1 Tempaku-cho, Toyohashi, Aichi, 441–8580, JAPAN
Satoru Kobayashi
Affiliation:
Dept. of Microtructure Physics and Metal Forming, MAX PLANK INSTITUTE FOR IRON RESERCH, Max-Plank-Strasse 1, D-40237 Dusseldorf, GERMANY• •Tokyo Institute of Technology
Masao Takeyama
Affiliation:
Dept. of Metallurgy and Ceramics Science, Tokyo Institute of Technology, 2–12–1 Ookayama, Meguro-ku, Tokyo 152–8552, JAPAN
Get access

Abstract

Impact resistance of a hot-forged TiAl alloy with a composition of Ti-42∼44Al-5∼10M: M=V, Mn(at%), consisting of lamellar, γ and β grain of which the hot-workability was improved by introducing β phase, has been investigated using an instrumented Charpy impact test, tensile test at high strain rate and foreign object attack test. In instrumented Charpy impact test the absorbed energies for crack initiation and propagation were measured, and the effect of microstructure on the absorbed energies has been analyzed, by paying attention to the grain size, interlamellar spacing and lamellar area fraction. In tensile test at high strain rate, the dependence of strain rate of hot-extruded TiAl alloy is obtained and compared with that of Nickel based superalloy, Inconel 713C. In foreign object attack test with taper plate specimen modified turbine blade and brass ball as foreign object, the relation between impact damage and thickness of specimen at attack point is investigated. A limit of impact energy, at which there isn't a crack on buck of attack point, is obtained with each thickness about hot-forged TiAl alloy, Ti-42Al-5Mn. Therefore, the method of improvement of toughness and assessment of impact resistance of TiAl alloy is shown in this study.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 842: Symposium S – Integrative and Interdisciplinary Aspects of Intermetallics , 2004 , S7.3
Copyright
Copyright © Materials Research Society 2005

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1) Tetsui, T., “Materials Science & Engineering”, A329–331(2002), P582.Google Scholar
2) Tetusi, T., Shindo, K., Kobayashi, S., Takeyama, M., “Intermetallics”, 11[4], (2003), P299.Google Scholar
3) Tetsui, T., Shindo, K., Kobayashi, S., Takeyama, M., “Scripta Materiaria”, 47(2002), P399.Google Scholar
4) Kobayashi, S., “Doctoral dissertation”, (2002).Google Scholar
5) Kobayashi, S., Takeyama, M., et. al. “Gamma Titanium Aluminides 2003”, TMS (2003), P165.Google Scholar
6) Liu, C. T. and Maziasz, P. J., “Intermetallics”, 6(1998), P653.Google Scholar