Hostname: page-component-cd9895bd7-p9bg8 Total loading time: 0 Render date: 2024-12-29T10:56:45.851Z Has data issue: false hasContentIssue false
  • English
  • Français

Micron-Size and Submicron-Size Light-Emitting Porous Silicon Structures

Published online by Cambridge University Press:  28 February 2011

S. P. Duttagupta ,
P. M. Fauchet ,
C. Peng ,
S.K. Kurinec ,
K. Hirschman  and
T. N. Blanton
S. P. Duttagupta
Affiliation:
Department of Electrical Engineering, University of Rochester, NY 14627
P. M. Fauchet
Affiliation:
Department of Electrical Engineering, University of Rochester, NY 14627
C. Peng
Affiliation:
Department of Electrical Engineering, University of Rochester, NY 14627
S.K. Kurinec
Affiliation:
Microelectronic Engineering, Rochester Institute of Technology, Rochester NY 14623
K. Hirschman
Affiliation:
Microelectronic Engineering, Rochester Institute of Technology, Rochester NY 14623
T. N. Blanton
Affiliation:
Eastman Kodak, Kodak Park, Rochester NY 14652
Get access

Abstract

We have developed three classes of techniques to produce micron-size and submicron-size light emitting porous Si (LEPSi) patterns and to protect the rest of the wafer. In the 1st class, LEPSi lines down to 2 µm width have been made using a photoresist/silicon nitride trilayer mask, followed by anodization. PL mapping of the structures indicates that the protected regions have not been etched. Using electron beam lithography sub-0.5 micron porous Si lines have been generated. In the 2nd class, formation of porous Si is inhibited by amorphizing Si using ion implantation followed by anodization and annealing. The crystallinity and electrical properties of the implanted region have been fully characterized after annealing. Using focussed ion-beam implantation, LEPSi patterns of the order of 100 nm have been obtained. The 3rd class consists of enhancing the formation of porous Si by a low energy/low dose bombardment (ion-milling) with argon ions prior to anodization. Under appropriate conditions, we have observed a strong enhancement of the formation rate of LEPSi where bombardment took place, possibly due to the generation of a large number of defects on the wafer surface.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 358: Symposium F – Microcrystalline and Nanocrystalline Semiconductors , 1994 , 647
Copyright
Copyright © Materials Research Society 1995

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1 Fauchet, R.M. et al. , SPIE Proc. 2144, 34 (1994).Google Scholar
2 Barbour, J. C. et al. , Appl. Phys. Lett. 59, 2088 (1991).Google Scholar
3 Doan, V.V. and Sailor, M.J., Appl. Phys. Lett. 60, 619 (1992).Google Scholar
4 Couillard, J.G. and Craighead, H.G., J. Vac. Sci. and Tech. B 12, 161 (1994).Google Scholar
5 Steckl, A.J. et al. , Appl. Phys. Lett. 62, 1982 (1992).Google Scholar
6 Xi-Mao, Bao and Hai-Qiang, Yang, Appl. Phys. Lett. 63, 2246 (1993).Google Scholar
7 Ravi;, K. V. Imperfections and Impurities in Semiconductor Silicon; John Wiley & Sons, Inc.; New York; 1981; p197.Google Scholar
8 Tsybeskov, L. et al. , Mat. Res. Soc. Symp. Proc. 298, 309 (1993).Google Scholar
9 Wolf, and Tauber, ; Silicon Processing for the VLSI era Vol. 1; Lattice Press; Sunset Beach, California; 1986; Chps. 6,7.Google Scholar
10 Peng, C. et al. , Appl. Phys. Lett. 64, 1259 (1994).Google Scholar
11 Duttagupta, S.P. et al. , 'Post-anodization implantation and CVD techniques for passivation of porous silicon', Mat. Res. Soc. Symp. Proc. 358, (1995), this volume.Google Scholar
12 Tsybeskov, L. et al. , 'Photoluminescence and electroluminescence in partially oxidized porous silicon', Mat. Res. Soc. Symp. Proc. 358, (1995), this volume.Google Scholar
13 Peng, C. et al. , Mat. Res. Soc. Symp. Proc. 298, 179 (1993).Google Scholar
14 Chuang, S.F., dissertation, Ph.D., Massachusetts Institute of Technology, 1989.Google Scholar
15 Smith, R.L. and Collins, S.D., J. Appl. Phys. 71, R1 (1992).Google Scholar