Hostname: page-component-cd9895bd7-8ctnn Total loading time: 0 Render date: 2024-12-29T14:55:44.252Z Has data issue: false hasContentIssue false
  • English
  • Français

Microstructure and Thermo-Mechanical Behavior of NiAl Coatings

Published online by Cambridge University Press:  26 February 2011

G. Dehm ,
J. Riethmüller ,
P. Wellner ,
O. Kraft ,
H. Clemens  and
E. Arzt
G. Dehm
Affiliation:
Max-Planck-Institut für Metallforschung, 70569 Stuttgart, Germany
J. Riethmüller
Affiliation:
Max-Planck-Institut für Metallforschung, 70569 Stuttgart, Germany
P. Wellner
Affiliation:
Max-Planck-Institut für Metallforschung, 70569 Stuttgart, Germany
O. Kraft
Affiliation:
Institut für Materialforschung II, Forschungszentrum Karlsruhe and Institut für Zuverlässigkeit von Bauteilen und Systemen, Universität Karlsruhe (TH), 76344 Karlsruhe, Germany
H. Clemens
Affiliation:
Department of Physical Metallurgy and Materials Testing, Montanuniversität Leoben, 8700 Leoben, Austria
E. Arzt
Affiliation:
Max-Planck-Institut für Metallforschung, 70569 Stuttgart, Germany
Get access

Abstract

In this study the thermo-mechanical behavior of a commercial Pt containing NiAl coating deposited on a Ni-base superalloy is compared with a Ni-rich NiAl coating sputter-deposited on a Si substrate. Both types of coatings possess high tensile room temperature stresses after thermal straining. The Pt-NiAl coating shows negligible plasticity as a result of solid solution and dispersion strengthening. In contrast, for the NiAl coatings on Si noticeable plasticity can be obtained if the film thickness exceeds the sub-micrometer range.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 842: Symposium S – Integrative and Interdisciplinary Aspects of Intermetallics , 2004 , S1.3
Copyright
Copyright © Materials Research Society 2005

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Affeldt, E. E., Adv. Eng. Mat. 2, 811 (2000).Google Scholar
2. Stiger, M. J., Yanar, N. M., Topping, M. G., and Meier, F.S., Z. Metallkde 90, 1069 (1999).Google Scholar
3. Purvis, A. L., Warnes, B. M., Surface & Coatings Technology 146–147, 1 (2001).Google Scholar
4. Chen, M. W., Ott, R. T., Hufnagel, T. C., Wright, P. K., and Hemker, K. J., Surface & Coatings Technology 163–164, 25 (2003).Google Scholar
5. Wellner, P., Dehm, G., Kraft, O., and Arzt, E., Z. Metallkde 95, 769 (2004).Google Scholar
6. Nix, W. D., Met. Trans. A 20, 2217 (1989).Google Scholar
7. Pharr, G. M., Oliver, W. C., and Brotzen, F. R., J. Mater. Res. 7, 613 (1992).Google Scholar
8. Gao, H., Zhang, L., Nix, W. D., Thompson, C. V., and Arzt, E., Acta Mat. 47, 2865 (1999).Google Scholar