Hostname: page-component-745bb68f8f-kw2vx Total loading time: 0 Render date: 2025-01-15T07:15:49.000Z Has data issue: false hasContentIssue false
  • English
  • Français

Processing and Characterizing RuAl Eutectics

Published online by Cambridge University Press:  11 February 2011

Todd Reynolds  and
David Johnson
Todd Reynolds
Affiliation:
Materials Engineering, Purdue University, West Lafayette, IN 47907–1289
David Johnson
Affiliation:
Materials Engineering, Purdue University, West Lafayette, IN 47907–1289
Get access

Abstract

Eutectic alloys in the Ru-Al-Mo system were directionally solidified by a cold crucible Czochralski technique. The solidification microstructures and composition of the phases were examined and used to estimate a partial liquidus projection. Preliminary results from compression and hardness testing indicate that the hardness of RuAl varies significantly with composition. The Ru-rich alloys in which RuAl is in equilibrium with the hcp (Ru,Mo) solid solution were found to have the lowest hardness values.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 753: Symposium BB – Defect Properties and Related Phenomena in Intermetallic Alloys , 2002 , BB5.34
Copyright
Copyright © Materials Research Society 2003

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Fleischer, R.L. and Zabala, R.J., Met Trans A, 21A, 2709–2715 (1990).Google Scholar
2. Pollock, T.M., Lu, D.C., Shi, X., Eow, K., Mater. Sci & Eng A. A317, 241–248 (2001).Google Scholar
3. Wolff, I.M., and Sauthoff, G., Acta Mater., 45, 2949–2969 (1997).Google Scholar
4. Ilic, N., Rein, R., Göken, M., Kempf, M., Soldera, F., Müchlich, F., Mater. Sci & Eng A, A329–331, 38–44 (2002).Google Scholar
5. Rosset, S., Cefalu, R., Varner, L., and Johnson, D., High-Temperature Ordered Intermetallic Alloys IX, Schneibel, J H. et al. eds, Mat. Res. Soc. Symp., Vol. 646 (2001) pp. N5.28.1–6.Google Scholar
6. Misra, A., Wu, Z., Kush, M., Gibala, R., Mater Sci & Eng A, A239–240, 74–87 (1997).Google Scholar
7. Misra, A., Wu, Z., Gibala, R., Noebe, R.D., and Oliver, B.F., Structural Intermetallics 1997, edited by Nathal, M.V., et al., (TMS, Warrendale, 1996) pp. 673–682.Google Scholar
8. Lundberg, L. B. in Rhenium and Rhenium Alloys, ed Bryskin, D.B. (TMS, 1997) pp. 373–383.Google Scholar
9. Milman, Yu V., and Kurdyumova, G.G. in Rhenium and Rhenium Alloys, ed Bryskin, D.B. (TMS, 1997) pp. 717–728.Google Scholar
10. Binary Alloy Phase Diagram, 2nd ed., editor Massalski, T.B. (ASM International, 1990) pp. 2659.Google Scholar