Hostname: page-component-78c5997874-4rdpn Total loading time: 0 Render date: 2024-11-10T05:27:04.710Z Has data issue: false hasContentIssue false
  • English
  • Français

Processing influence on the reliability of platinum thin films for MEMS applications

Published online by Cambridge University Press:  01 February 2011

Danick Briand ,
Stephan Heimgartner ,
Mireille Leboeuf ,
Massoud Dadras  and
Nico F. de Rooij
Danick Briand
Affiliation:
Institute of Microtechnology, University of Neuchatel Rue Jaquet-Droz 1, P.O. Box 3, CH-2007 Neuchatel, Switzerland
Stephan Heimgartner
Affiliation:
Currently at elmicron AG, Sachseln, Switzerland
Mireille Leboeuf
Affiliation:
Institute of Microtechnology, University of Neuchatel Rue Jaquet-Droz 1, P.O. Box 3, CH-2007 Neuchatel, Switzerland
Massoud Dadras
Affiliation:
Institute of Microtechnology, University of Neuchatel Rue Jaquet-Droz 1, P.O. Box 3, CH-2007 Neuchatel, Switzerland
Nico F. de Rooij
Affiliation:
Institute of Microtechnology, University of Neuchatel Rue Jaquet-Droz 1, P.O. Box 3, CH-2007 Neuchatel, Switzerland
Get access

Abstract

The influence of high temperature post-processes on the microstructural, electrical, and mechanical properties of evaporated platinum thin films with tantalum as adhesion layer was investigated. Post-processes, such as deposition of a silicon nitride passivation layer by LPCVD and annealing at high temperature (up to 830°C) in an inert or reactive gaseous atmosphere, were performed separately or successively on platinum/tantalum films having different thickness. An abnormal grain growth and a grain reorientation occurred in the platinum films during the heat treatments, with more severe hillocks formation when performed in air at temperatures higher than 500°C. Another parameter influencing the electrical characteristics (resistivity, temperature coefficient of resistance) of these films, in addition to the post-processing temperature and time, was the thickness of the platinum film.

A passivation made of LPCVD silicon nitride film was shown to stabilise the electrical properties of the Pt/Ta films before post-processing or operating them at high temperatures, up to the deposition temperature of the passivation film. However, if the passivation is removed, postprocessing of the Pt films at a higher temperature than 500°C in air induced more or less severe hillocks formation and adhesion problems could occur, related to the oxidation of tantalum. The adhesion of the Pt/Ta films was found to depend on the thickness of the LPCVD silicon nitride film deposited, which was removed before annealing in air. The Pt/Ta films properties depend on the annealing conditions, time and temperature, and on the history of the film, if the annealing was performed just after its deposition or after successive thermal processes.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 729: Symposium U – MEMS and BioMEMS , 2002 , U2.5
Copyright
Copyright © Materials Research Society 2002

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

[1] Olowolafe, J.O., Jones, R. E. Jr, Campbell, A. C., Hegde, R. I., Mogab, C. J. and Gregory, R. B., J. Appl. Phys. 73(4), 1764 (1993).Google Scholar
[2] Fox, G. R., Trolier-McKinstry, S., Krupanidhi, S. B. and Casas, L. M., J. Mater. Res. 10(7), 1790 (1995).Google Scholar
[3] Eichorst, D. J. and Baron, C. J., Ferroelectrics 166, 73 (1995).Google Scholar
[4] Park, K. H., Kim, C. Y., Jeong, Y. W., Kwon, H. J., Kim, K. Y., Lee, S. and Kim, S. T., J. Mater Res. 10(7), 1795 (1995).Google Scholar
[5] Esch, H., Huyberechts, G., Mertens, R., Maes, G., Manca, J., Ceuninck, W. De and Schepper, L. De, Sens. & Act. B65, 190 (2000).Google Scholar
[6] Maeder, T., Sagalowicz, L. and Muralt, P., Jpn. J. Appl. Phys. 37, 2007 (1998).Google Scholar
[7] Firebaugh, S. L., Jensen, K. F. and Schmidt, M. A., J. Microelectromech. Syst. 7(1), 128 (1998).Google Scholar
[8] Liu, L., Gong, H., Wang, Y., Wang, J., Wee, A.T.S. and Liu, R., Mat. Sci. & Eng. C, 16, 85 (2001).Google Scholar