Hostname: page-component-78c5997874-g7gxr Total loading time: 0 Render date: 2024-11-10T11:01:32.753Z Has data issue: false hasContentIssue false
  • English
  • Français

Short and Long-Term Leaching Behavior of a Low-Calcium Fly Ash and Cement-Stabilized Fly Ash

Published online by Cambridge University Press:  25 February 2011

R. I. A. Malek ,
P. H. Licastro  and
D. M. Roy
R. I. A. Malek
Affiliation:
Materials Research Laboratory, The Pennsylvania State University, University Park, PA 16802, USA
P. H. Licastro
Affiliation:
Materials Research Laboratory, The Pennsylvania State University, University Park, PA 16802, USA
D. M. Roy
Affiliation:
Also Affiliated with the Department of Materials Sciences and Engineering
Get access

Abstract

Low-calcium fly ashes from eastern Pennsylvania power plants, stabilized with Portland cement, have a potential application as a pipeline bedding material. A typical fly ash, and a cement-stabilized material made with this fly ash, were subjected to extensive physical and chemical characterization. Two procedures were used to investigate whether leachates from the bedding materials were nonhazardous according to the criteria of the regulatory agencies. The first was the short-term EPA test, used to define a hazardous waste under the RCRA regulations, and the second was a long-term flow-through test developed at MRL/PSU. In the second test, driving pressure, flow rate and permeability were monitored during the experiment. Calculations showed that this flow-through technique simulates rain water percolation in a similar sized bed for about 25 years. The leaching fluids in both methods were deionized water (EPA procedure) and simulated rain water. Analyses for seventeen metals by DC plasma emission spectrometry and for seven anions by ion chromatography were performed. Concentrations of the leachates from the two procedures were well below the levels that define a hazardous waste. Considerable insight into the long term leaching mechanisms of various elements was obtained from the flow-through experiments.

Type
Articles
Information
MRS Online Proceedings Library (OPL) , Volume 65: Symposium T – Fly Ash and Coal Conversion By-Products II , 1985 , 269
Copyright
Copyright © Materials Research Society 1986

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Dreesen, D.R., Gladney, E.S., Owens, J.W., Perkins, B.L., Wienke, C.L. and Wangen, L.E., Environ. Sci. Technol. 11, 1017–1019 (1977).Google Scholar
2. Theis, T.L. and Wireth, J.L., Environ. Sci. Technol. 11, 1096–1100 (1977).CrossRefGoogle Scholar
3a. Roy, D.M., Luke, K., , S. and Diamond, , in in Fly Ash and Coal Conversion By-Products: Characterization, Utilization and Disposal I, Mat. Res. Soc. Symp. Proc. Vol.43, edited by McCarthy, G.J. and Lauf, R.J. (Materials Research Society, Pittsburgh, 1985) pp. 3–20.Google Scholar
b. Fisher, G.L. and Chrisp, C.E., in Proc. Symp. Appl. Short-Term Bioassays Fractionation Anal. Complex Environ. Mixtures, edited by Waters, M.D., Nesnow, S., Huisingh, J.L., Sandhu, S.S. and Claxton, L., EPA 60019–78-027, pp. 441–462, (1978).Google Scholar
c. Fisher, G.L. and Natusch, D.F.S., U.S. Dept. Energy, NTIS UCD-472–502 (1979).Google Scholar
d. Fisher, G.L. and Natusch, D.F.S., in Anal. Methods for Coal and Coal Products, edited by Karr, C. Jr. Vol. IIl (1979).Google Scholar
e. Roy, W.R., Thiery, R.G., Schuller, R.M., and Suloway, J.J., Environmental Geology Notes, 96 (1981).Google Scholar
f. Wallace, J.R., Ph. D. Thesis, University of Illinois (1974).Google Scholar
4. Federal Register, Dec. 18, 1978, May 19, 1980. Pennsylvania Bulletin, Vol.12, No. 36, Sept. 4 (1982).Google Scholar
5. Diamond, S., (a) in Effects of Fly Ash Incorporation in Cement and Concrete, Proceedings Symposium N, Materials Research Society, Edited by Diamond, S., (Materials Research Society, University Park, PA 16802 (1982) pp. 12–23; (b) Cem. Concr. Res. 14 (4), 455–462 (1984).Google Scholar
6. Scheetz, B.E., Strickler, D.W., Grutzeck, M.W. and Roy, D.M., in Effects of Fly Ash Incorporation in Cement and Concrete, Proceedings Symposium N, Materials Research Society, edited by Diamond, S. (Materials Research Society, University Park, PA 16802, 1982) pp. 24–33.Google Scholar
7. Idorn, G.M., in Workshop Proceedings: Research and Development Needs for Use of Fly Ash in Cement and Concrete, EPRI CS-2616-SR (Electric Power Research Institute, Palo Alto, CA, Sept. 1982).Google Scholar
8. Diamond, S. and Lopez-Flores, F., in Effects of Fly Ash Incorporation in Cement and Concrete, Proceedings of Symposium N, Materials Research Society, edited by Diamond, S. (Materials Research Society, University Park, PA 16802, 1982) pp. 34–44.Google Scholar
9. Diamond, S., Cem. Concr. Res. 13 (4), 459–464 (1983).Google Scholar
10. Diamond, S., in The Use of PFA in Concrete, edited by Cabrera, J. and Cusens, A. (Dept. of Civil Engineering, Leeds, Concrete Society and Central Electricity Generating Board, U.K., 1982) pp. 9–20.Google Scholar
11a. Hulett, L.D., Weinberger, A.J., Ferguson, N.M., Northcutt, K.J. and Lyon, W.S., Trace Elements and Phase Relations in Fly Ash, EA-1822, Res. Proj. 1062, Final Report for Electric Power Research Institute, Palo Alto, CA May 1981.Google Scholar
b. Hulett, L.D. Jr., et al., Science 210 (19), 1356 (Dec. 1980).Google Scholar
c. Lauf, R., Am. Ceramic Soc. Bulletin 61, 487–490 (1982).Google Scholar
12. Roy, D.M., Grutzeck, M.W., Scheetz, B.E. and White, E.L., XIII Conference on Silicate Industry and Science, Budapest, June 1–5, 1981.Google Scholar
13. Malek, R.I.A. and Roy, D.M., in Fly Ash and Coal Conversion By-Products: Characterization, Utilization and Disposal I, Mat. Res. Soc. Symp. Proc. Vol.43, edited by McCarthy, G.J. and Lauf, R.J. (Materials Research Society, Pittsburgh, 1985) pp. 41–50.Google Scholar