Hostname: page-component-cd9895bd7-jkksz Total loading time: 0 Render date: 2024-12-28T17:19:27.056Z Has data issue: false hasContentIssue false
  • English
  • Français

Sigma phase precipitation on welded SAF 2205 Duplex Stainless Steels after isothermal heat treatment

Published online by Cambridge University Press:  30 July 2014

A. F. Miranda Pérez ,
R. Sandström ,
I. Calliari  and
F. A. Reyes Valdés
A. F. Miranda Pérez
Affiliation:
Corporación Mexicana de Investigación en Materiales, COMIMSA, Ciencia y Tecnología N° 790. Fracc. Saltillo 400. Saltillo, Coahuila, México
R. Sandström
Affiliation:
Materials Science and Engineering, Royal Institute of Technology, Brinellvägen 23, Stockholm, Sweden
I. Calliari
Affiliation:
Industrial Engineering Department, University of Padua, Via Marzolo 9, Padua, Italy
F. A. Reyes Valdés
Affiliation:
Corporación Mexicana de Investigación en Materiales, COMIMSA, Ciencia y Tecnología N° 790. Fracc. Saltillo 400. Saltillo, Coahuila, México
Get access

Abstract

Duplex stainless steels are commonly used for various applications owing to their superior corrosion resistance and/or strength. They have ferromagnetic behavior together with a good thermal conductivity and a lower thermal expansion as a result of higher ferrite content than austenitic steels. Their ferrite matrix suffers a decomposition process during aging in the temperature range 650-950° C producing precipitation of austenite, σ and χ, carbides and nitrides. These intermetallic phases are known to be deleterious for corrosion resistance and mechanical properties.

In this work the effect of aging time during isothermal treatment at 850°C and 900°C on the microstructure of SAF 2205 Duplex Stainless Steels welded plates has been investigated. The aim of this work is to determine the morphology of σ phase, and perform a quantitative analysis of the precipitation process.

Submerged Arc Welding is used for processing. It produces a high content of δ ferrite in the heat affected zone and low content of austenite in the weld. Microstructural examination shows that the σ phase precipitates at δ ferrite/γ interphases. Longer aging treatments give rise to an increase of volume fraction together with a coarser morphology.

Keywords

steelsecond phasesstrength
Type
Articles
Information
MRS Online Proceedings Library (OPL) , Volume 1611: Symposium 4A – Advanced Structural Materials--2013 , 2014 , pp. 177 - 182
Copyright
Copyright © Materials Research Society 2014 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

Olden, V., Thaulow, C., Johnsen, R.. Mater. Des. , 29, pp. 1934–1948 (2008).CrossRefGoogle Scholar
Johansson, P., Liljas, M. in A new lean duplex stainless steel for construction purpouses, (4th European Stainless Steel Science and Market Conf. Proc. 2002).Google Scholar
Badji, R., Bouabdallah, M., Bacroix, B., Kaloun, C., Belkessa, B., Maza, H.. Mater. Char. , 59, pp. 447–453 (2008).CrossRefGoogle Scholar
Sieurin, H., Sandström, R.. Mater. Sci. Eng. A , 418, pp. 250–256 (2006).CrossRefGoogle Scholar
Calliari, I., Zanesco, M., Ramous, E., Bassani, P.. JMEPEG , 16, pp. 109–112 (2007).CrossRefGoogle Scholar
Sathirachinda, N., Pettersson, R., Wessman, S., Pan, J.. Corr. Sci , 52, pp. 176–186 (2010).CrossRefGoogle Scholar
Young, M. C., Tsay, L. W., Shin, C.-S., Chan, S. L. I.. Int. J. Fatigue , 29, pp. 2155–2162 (2007).CrossRefGoogle Scholar
McPherson, N. A., Chi, K., Baker, T. N.. J. Mater. Proc.Tech. , 134, pp. 174–179 (2003).CrossRefGoogle Scholar