Hostname: page-component-745bb68f8f-v2bm5 Total loading time: 0 Render date: 2025-01-15T06:44:22.047Z Has data issue: false hasContentIssue false
  • English
  • Français

Simulation of A Low Loss Optical Modulator for Fabrication in Simox Material

Published online by Cambridge University Press:  25 February 2011

C K Tang ,
G T Reed ,
A J Walton  and
A G Rickman
C K Tang
Affiliation:
Department of Electronic & Electrical Engineering, University of Surrey, Guildford, Surrey, UK
G T Reed
Affiliation:
Department of Electronic & Electrical Engineering, University of Surrey, Guildford, Surrey, UK
A J Walton
Affiliation:
Department of Electronic & Electrical Engineering, University of Edinburgh, Edinburgh, UK
A G Rickman
Affiliation:
Departments of Electronic & Electrical Engineering and Physics, University of Surrey, Guildford, Surrey, UK
Get access

Abstract

A novel phase modulator has been designed and analysed, assuming fabrication in a silicon-on-insulator material such as SIMOX. The proposed modulator is based upon a transverse p-i-n structure, utilising the plasma dispersion effect to produce the desired refractive index change in an optical rib waveguide. The device has been studied using the MEDICI two dimensional device simulation package to optimise the injected carrier interaction with the propagating optical mode. Whilst the device is designed to support a single optical mode, it measures several micrometers in cross sectional dimensions, thereby simplifying fabrication and allowing efficient coupling to other single mode devices such as optical fibers. Furthermore the device has an extremely high figure of merit, predicting over 200 degrees of induced phase shift per volt per mm. This implies a short active length together with a low power requirement.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 298: Symposium B – Silicon-Based Optoelectronic Materials , 1993 , 247
Copyright
Copyright © Materials Research Society 1993

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1 Reeson, K J, Stephens, K G, and Hemment, P L F, Nucl Instrum and Methods, 290, B37/38 1989.Google Scholar
2 Weiss, B L, IEEE Photonics Technology Letters”, 3, 19, 1991.Google Scholar
3 Reed, G T, Rickman, A, Weiss, B L, Namavar, F and Soref, R, Proceedings of MRS Fall meeting, Boston, USA 1991, Symposium J, Optical Waveguide Materials, 1991.Google Scholar
4 Normandin, R, Can J Phys., p833, 66, 1988.Google Scholar
5 Treyz, G V, IEEE Electron Device Lett., 12. 276, 1991.Google Scholar
6 Soref, R and Lorenzo, J P, IEEE J Quant. Elect. QE–22 873, 1986.Google Scholar
7 Friedman, L, J Appl. Phys., 63, 1831, 1988.Google Scholar
8 Soref, R and Bennett, B R, IEEE J Quant. Elect. OE–23 123, 1987.Google Scholar
9 Schmidtchen, J, Elect. Lett., 27, 1486, 1991.Google Scholar
10 Soref, R A, IEEE J Quant. Elect.Google Scholar
11 Alping, A, Wu, X S, Hausten, T R, Coldren, L A, Appl Phys Lett, 48, 1243, 1986.Google Scholar
12 Hunsperger, R G, ‘Integrated Optics’, Springer-Verlag, 1985, ISBN 0-387-13078-0Google Scholar