Hostname: page-component-78c5997874-t5tsf Total loading time: 0 Render date: 2024-11-13T14:59:45.814Z Has data issue: false hasContentIssue false

Surface and Interface Characterization of Ion Beam Re-crystallized Si

Published online by Cambridge University Press:  11 February 2011

P. K. Sahoo
Affiliation:
Department of Physics, Indian Institute of Technology Kanpur, Kanpur 208 016, India.
B. Satpati
Affiliation:
Institute of Physics, Bhubaneswar 751 001, India.
S. Dey
Affiliation:
Department of Physics, Indian Institute of Technology Kanpur, Kanpur 208 016, India.
P. V. Satyam
Affiliation:
Institute of Physics, Bhubaneswar 751 001, India.
T. Som
Affiliation:
Institute of Physics, Bhubaneswar 751 001, India.
V. N. Kulkarni
Affiliation:
Department of Physics, Indian Institute of Technology Kanpur, Kanpur 208 016, India. Center for Superconductivity Research, Dept. of Physics, Univ. of Maryland, College Park.
Get access

Abstract

In the present work we have studied efficacy of ion beam induced epitaxial crystallization (IBIEC) to recover amorphous layers (300 – 350 nm) produced by MeV Kr ions in Si(100) and studied the associated changes occurring on surface and interface of the recrystallized region. IBIEC experiments were carried out at sample temperatures in the range of 200 − 400°C using 1 MeV N+ ion beam. Rutherford backscattering-Channeling technique showed planar and gradual recovery of the amorphous layer as a function of temperature. Transmission electron microscopy measurements show good crystalline structure of the recovered region at 400°C while at lower temperatures nano-crystalline Si formation embedded in the amorphous structure is evident. The surface topography studied by atomic force microscopy shows development of islands after IBIEC. The rms roughness is around 0.5 nm and average height of the islands is found to be 1.8 nm. The observed epitaxial growth and the surface topographical features have been correlated.

Type
Research Article
Copyright
Copyright © Materials Research Society 2003

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

[1] Williams, J.S., Elliman, R.G., Brown, W.L., Siedel, T.E., Phys. Rev. Lett. 55, 1482 (1985).Google Scholar
[2] Nakata, J., Phys. Rev. B43, 14643 (1991).Google Scholar
[3] Kinomura, A., Chayahara, A.. Tsubouchi, N., Williams, Y.S., Nucl. Instr. Meth. Phys. Res. B148, 370 (1999).Google Scholar
[4] Titov, A.I., Kucheyev, S.O., Nucl. Instr. Meth. Phys. Res. B168, 375 (2000).Google Scholar
[5] Heera, V., Henkel, T., Kögler, R., and Skorupa, W., Phys. Rev. B52, 15 776 (1995).Google Scholar
[6] Linnors, J., Holmen, G., J. Appl. Phys. 62, 4737 (1987).Google Scholar
[7] Linnors, J., Svensson, B., Holmen, G., Phys. Rev. B30, 3629 (1984).Google Scholar
[8] Ziegler, J.F., Nucl. Instr. Meth. Phys. Res. B6, 170 (1985).Google Scholar
[9] Sai-halasz, G.A., et al. IEEE Trans. 725 (1982).Google Scholar
[10] Sadan, D.K., Washburn, J., Magee, C.W., Appl. Phys. Lett. 44, 301 (1984).Google Scholar
[11] Ryssel, H. and Ruge, I. in Ion Implantation (Wiley, New York, 1986).Google Scholar
[12] Sahoo, P.K., Kulkarni, V.N.; National Symposium on Science and Technology of Vacuum and Thin Films, Bangalore, India (2001) (unpublished).Google Scholar
[13] Chu, W.-K., Mayer, J.W. and Nicolet, M.-A. in Backscattering Spectrometry (Academic Press, NY, 1978).Google Scholar
[14] Doolittle, L.R., Nucl. Instr. Meth. Phys. Res. B15, 227 (1986).Google Scholar
[15] Kwizera, P. and Reif, R., Appl. Phys. Lett. 41, 379 (1982).Google Scholar