Hostname: page-component-78c5997874-v9fdk Total loading time: 0 Render date: 2024-11-13T03:55:18.835Z Has data issue: false hasContentIssue false
  • English
  • Français

Exploring high-stiffness pellets as filaments in fused filament fabrication

Published online by Cambridge University Press:  16 May 2024

Martin Lilletvedt Rasmussen ,
Simen Gjethammer Grønvik ,
Henrik H. Øvrebø ,
Ben Hicks ,
Chris Snider ,
Martin Steinert ,
Christer W. Elverum  and
Sindre Wold Eikevåg
Martin Lilletvedt Rasmussen
Affiliation:
Norwegian University of Science and Technology, Norway
Simen Gjethammer Grønvik
Affiliation:
Norwegian University of Science and Technology, Norway
Henrik H. Øvrebø
Affiliation:
Norwegian University of Science and Technology, Norway
Ben Hicks
Affiliation:
University of Bristol, United Kingdom
Chris Snider
Affiliation:
University of Bristol, United Kingdom
Martin Steinert
Affiliation:
Norwegian University of Science and Technology, Norway
Christer W. Elverum
Affiliation:
Norwegian University of Science and Technology, Norway
Sindre Wold Eikevåg*
Affiliation:
Norwegian University of Science and Technology, Norway University of Bristol, United Kingdom
*
sindre.w.eikevag@ntnu.no

Abstract

Core share and HTML view are not available for this content. However, as you have access to this content, a full PDF is available via the ‘Save PDF’ action button.

In Fused Filament Fabrication, there is increasing interest in the potential of composite filaments for producing complex and load-bearing components. Carbon fibre-filled polyamide currently has highest available strength and stiffness, but promising variants are not in filament form. This paper investigates filament production of commercially available, high-filled PA-CF pellets by modifying a tabletop filament extruder. We show filament production is possible by improving cooling. The FFF printed specimens show an average UTS of 135.5 MPa, higher than most commercially available filaments.

Keywords

additive manufacturingproduction designhigh-performance polymers3D printing
Type
Design for Additive Manufacturing
Information
Proceedings of the Design Society , Volume 4: DESIGN 2024 , May 2024 , pp. 1799 - 1808
Creative Commons
Creative Common License - CCCreative Common License - BYCreative Common License - NCCreative Common License - ND
This is an Open Access article, distributed under the terms of the Creative Commons Attribution-NonCommercial-NoDerivatives licence (http://creativecommons.org/licenses/by-nc-nd/4.0/), which permits non-commercial re-use, distribution, and reproduction in any medium, provided the original work is unaltered and is properly cited. The written permission of Cambridge University Press must be obtained for commercial re-use or in order to create a derivative work.
Copyright
The Author(s), 2024.

References

3devoA, 2023. Research your own 3D printing materials [WWW Document]. Res. Your Own 3D Print. Mater. URL https://www.3devo.com (accessed 11.8.23).Google Scholar
3devoC, 2023. How To Start Extruding Carbon Fiber Filament [WWW Document]. URL https://www.3devo.com/blog/extruding-carbon-fiber-filament (accessed 11.11.23).Google Scholar
Arjun, P., Bidhun, V.K., Lenin, U.K., Amritha, V.P., Pazhamannil, R.V., Govindan, P., 2022. Effects of process parameters and annealing on the tensile strength of 3D printed carbon fiber reinforced polylactic acid. Mater. Today Proc., 9th International Conference on “Advancements and Futuristic Trends in Mechanical and Materials Engineering” 62, 7379–7384. https://doi.org/10.1016/j.matpr.2022.02.142CrossRefGoogle Scholar
Berman, B., 2012. 3-D printing: The new industrial revolution. Bus. Horiz. 55, 155–162.CrossRefGoogle Scholar
Birkelid, A.H., Eikevåg, S.W., Elverum, C.W., Steinert, M., 2022. High-performance polymer 3D printing – Open-source liquid cooled scalable printer design. HardwareX 11. https://doi.org/10.1016/j.ohx.2022.e00265CrossRefGoogle ScholarPubMed
Bjørken, O.U., Andresen, B., Eikevåg, S.W., Steinert, M., Elverum, C.W., 2022. Thermal Layer Design in Fused Filament Fabrication. Appl. Sci. 12, 7056.CrossRefGoogle Scholar
Blanco, I., Cicala, G., Recca, G., Tosto, C., 2022. Specific Heat Capacity and Thermal Conductivity Measurements of PLA-Based 3D-Printed Parts with Milled Carbon Fiber Reinforcement. Entropy 24, 654.CrossRefGoogle ScholarPubMed
Dey, A., Roan Eagle, I.N., Yodo, N., 2021. A review on filament materials for fused filament fabrication. J. Manuf. Mater. Process. 5, 69.Google Scholar
Dul, S., Fambri, L., Pegoretti, A., 2021. High-Performance Polyamide/Carbon Fiber Composites for Fused Filament Fabrication: Mechanical and Functional Performances. J. Mater. Eng. Perform. 30, 5066–5085. https://doi.org/10.1007/s11665-021-05635-1CrossRefGoogle Scholar
Giles, H.F. Jr, Mount III, E.M., Wagner, J.R. Jr, 2004. Extrusion: the definitive processing guide and handbook. William Andrew.Google Scholar
Kikuchi, B.C., Bussamra, F.L. de, S., Donadon, M.V., Ferreira, R.T.L., Sales, R. de, C.M., 2020. Moisture effect on the mechanical properties of additively manufactured continuous carbon fiber-reinforced Nylon-based thermoplastic. Polym. Compos. 41, 5227–5245. https://doi.org/10.1002/pc.25789CrossRefGoogle Scholar
LEHVOSS Group, 2023. LUVOCOM 3F PAHT® CF 9743 BK.Google Scholar
Lionetto, F., 2021. Carbon Fiber Reinforced Polymers. Materials 14, 5545. https://doi.org/10.3390/ma14195545CrossRefGoogle ScholarPubMed
LUVOCOM [WWW Document], 2023. URL https://www.luvocom.de/en/products/3d-printing-materials/luvocom-3f/?consent_management%5B0%5D%5Buid%5D=25&consent_management%5B1%5D%5Buid%5D=26&cHash=14d4bfb3f891931f5fd048592d63f061 (accessed 11.14.23).Google Scholar
Ning, F., Cong, W., Qiu, J., Wei, J., Wang, S., 2015. Additive manufacturing of carbon fiber reinforced thermoplastic composites using fused deposition modeling. Compos. Part B Eng. 80, 369–378. https://doi.org/10.1016/j.compositesb.2015.06.013CrossRefGoogle Scholar
Øvrebø, H.H., Koldre, S.-A., Nesheim, O.S., Eikevåg, S.W., Steinert, M., Elverum, C.W., 2023. CREATING AN OPEN-SOURCE, LOW-COST COMPOSITE FEEDER DESIGN TO IMPROVE FILAMENT QUALITY OF HIGH-PERFORMANCE MATERIALS TO BE USED IN FUSED FILAMENT FABRICATION (FFF). Proc. Des. Soc. 3, 1097–1106. https://doi.org/10.1017/pds.2023.110Google Scholar
Pandzic, A., Hodzic, D., 2022. Tensile Mechanical Properties Comparation of PETG, ASA and PLA-Strongman FDM Printed Materials With and Without Infill Structure, in: Katalinic, B. (Ed.), DAAAM Proceedings. DAAAM International Vienna, pp. 0221–0230. https://doi.org/10.2507/33rd.daaam.proceedings.031CrossRefGoogle Scholar
Pandžić, A., Hodzic, D., Milovanović, A., 2019. Effect of Infill Type and Density on Tensile Properties of PLA Material for FDM Process. https://doi.org/10.2507/30th.daaam.proceedings.074CrossRefGoogle Scholar
Pearce, J.M., 2012. Building Research Equipment with Free, Open-Source Hardware. Science 337, 1303–1304. https://doi.org/10.1126/science.1228183CrossRefGoogle ScholarPubMed
Podsiadły, B., Skalski, A., Rozpiórski, W., Słoma, M., 2021. Are We Able to Print Components as Strong as Injection Molded? —Comparing the Properties of 3D Printed and Injection Molded Components Made from ABS Thermoplastic. Appl. Sci. 11, 6946. https://doi.org/10.3390/app11156946CrossRefGoogle Scholar
Polymaker, 2023. PolyMideTM PA6-CF TDS.Google Scholar
Striemann, P., Hülsbusch, D., Niedermeier, M., Walther, F., 2020. Optimisation and Quality Evaluation of the Interlayer Bonding Performance of Additively Manufactured Polymer Structures. Polymers 12, 1166. https://doi.org/10.3390/polym12051166CrossRefGoogle Scholar
Sunon, 2009. Sunon DC Brushless Fan & Blower.Google Scholar
Van De Werken, N., Tekinalp, H., Khanbolouki, P., Ozcan, S., Williams, A., Tehrani, M., 2020. Additively manufactured carbon fiber-reinforced composites: State of the art and perspective. Addit. Manuf. 31, 100962. https://doi.org/10.1016/j.addma.2019.100962Google Scholar
Velu, R., Jayashankar, D.K., Subburaj, K., 2021. Chapter 20 - Additive processing of biopolymers for medical applications, in: Pou, J., Riveiro, A., Davim, J.P. (Eds.), Additive Manufacturing, Handbooks in Advanced Manufacturing. Elsevier, pp. 635–659. https://doi.org/10.1016/B978-0-12-818411-0.00019-7CrossRefGoogle Scholar