Hostname: page-component-78c5997874-mlc7c Total loading time: 0 Render date: 2024-11-11T03:35:51.714Z Has data issue: false hasContentIssue false

On an effective design approach of cartesian space neuralnetwork control for robot manipulators

Published online by Cambridge University Press:  01 May 1997

Seul Jung
Affiliation:
Robotics Research Laboratory, Department of Electrical and Computer Engineering, University of California, Davis, CA 95616, USA. E-mail: hsia@ece.ucdavis.edu and jung@ece.ucdavis.edu
T. C. Hsia
Affiliation:
Robotics Research Laboratory, Department of Electrical and Computer Engineering, University of California, Davis, CA 95616, USA. E-mail: hsia@ece.ucdavis.edu and jung@ece.ucdavis.edu

Abstract

It is well known that computed torque robot control is subjected toperformance degradation due to uncertainties in robot model, and application ofneural network (NN) compensation techniques are promising. In this paper weexamine the effectiveness of neural network (NN) as a compensator for thecomplex problem of Cartesian space control. In particular we examine thedifferences in system performance of accurate position control when the same NNcompensator is applied at different locations in the controller structure. It isfound that using NN to modify the reference trajectory to compensate for modeluncertainties is much more effective than the traditional approach of modifyingcontrol input or joint torque/force. To facilitate the analysis, a new NNtraining signal is introduced and used for all cases. The study is also extendedto non-model based Cartesian control problems. Simulation results withthree-link rotary robot are presented and performances of different compensatinglocations are compared.

Type
Research Article
Copyright
© 1997 Cambridge University Press

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)