Hostname: page-component-cd9895bd7-lnqnp Total loading time: 0 Render date: 2024-12-26T22:10:12.537Z Has data issue: false hasContentIssue false

Harvest Weed Seed Control Systems are Similarly Effective on Rigid Ryegrass

Published online by Cambridge University Press:  24 April 2017

Michael J. Walsh*
Affiliation:
Associate Professor, Faculty of Agriculture and Environment, University of Sydney, 12656 Newell Highway, Narrabri, NSW 2390, Australia
Charlotte Aves
Affiliation:
Postgraduate Student, Melbourne School of Land and Environment, University of Melbourne, Nalinga Road, Dookie, Victoria 3647, Australia
Stephen B. Powles
Affiliation:
Professor and Director, Australian Herbicide Resistance Initiative, School of Plant Biology, University of Western Australia, 35 Stirling Highway, Crawley, WA 6009, Australia
*
*Corresponding author’s E-mail: m.j.walsh@sydney.edu.au
Rights & Permissions [Opens in a new window]

Abstract

Harvest weed seed control (HWSC) systems have been developed to exploit the high proportions of seed retained at maturity by the annual weeds rigid ryegrass, wild radish, bromegrass, and wild oats. To evaluate the efficacy of HWSC systems on rigid ryegrass populations, three systems, the Harrington Seed Destructor (HSD), chaff carts, and narrow-windrow burning were compared at 24 sites across the western and southern wheat production regions of Australia. HWSC treatments were established at harvest (Nov. – Dec.) in wheat crops with low to moderate rigid ryegrass densities (1 to 26 plants m−2). Rigid ryegrass counts at the commencement of the next growing season (Apr. – May) determined that HWSC treatments were similarly effective in reducing emergence. Chaff carts, narrow-windrow burning, or HSD systems act similarly on rigid ryegrass seed collected during harvest to deliver substantial reductions in subsequent rigid ryegrass populations by restricting seedbank inputs. On average, population densities were reduced by 60%, but there was considerable variation between sites (37 to 90%) as influenced by seed production and the residual seedbank. Given the observed high rigid ryegrass seed production levels at crop maturity it is clear that HWSC has a vital role in preventing seedbank inputs in Australian conservation cropping systems.

Los sistemas de control de semilla durante la cosecha (HWSC) han sido desarrollados para explotar las altas proporciones de semilla retenida en la madurez por las malezas anuales Lolium rigidum, Raphanus raphanistrum, Bromus spp., y Avena fatua. Para evaluar la eficacia de los sistemas HWSC sobre poblaciones de L. rigidum, se compararon tres sistemas: el destructor de semilla Harrington (HSD), carretas de captura de paja, y quema de residuos acumulados en hileras, en 24 sitios a lo largo del oeste y el sur de las regiones productoras de trigo de Australia. Los tratamientos HWSC fueron establecidos durante la cosecha (Nov. −Dec.) en cultivos de trigo con densidades de plantas de L. rigidum de bajas a moderadas (1 a 26 plantas m−2). Los conteos de L. rigidum al inicio de la siguiente temporada de crecimiento (Abr. −Mayo) determinaron que los tratamientos HWSC fueron similarmente efectivos para reducir la emergencia. Las carretas de captura de paja, la quema de residuos en hileras, o HSD actuaron en forma similar al colectar la semilla de L. rigidum durante la cosecha y para generar reducciones sustanciales en las poblaciones subsiguientes, al restringir el ingreso de semilla nueva al banco de semillas. En promedio, la densidad de las poblaciones se redujo en 60%, pero hubo una variación considerable entre sitios (37 a 90%) dependiendo de la producción de semilla y del banco de semillas residual. Con base en los altos niveles de producción de semilla de L. rigidum observados al momento de la madurez del cultivo, es claro que HWSC juega un rol vital para prevenir el ingreso de semillas al banco de semillas en los sistemas de cultivos de conservación Australianos.

Type
Note
Copyright
© Weed Science Society of America, 2017 

In cropping systems, annual weed species infestations are completely dependent on the maintenance of a viable seed bank, and so there is widespread understanding that weed seed production must be prevented and/or targeted wherever feasible. The now widely adopted conservation cropping systems (Llewellyn et al. Reference Llewellyn, D’Emden and Kuehne2012) are based on reduced soil disturbance, resulting in weed seed banks being constricted to the upper soil layer (0 to 5 cm). In Australian cropping systems, shallow seed banks do not persist owing to predation (Spafford Jacob et al. Reference Spafford Jacob, Minkey, Borger and Gallagher2006), fatal germinations, and high rates of seed decay (Chauhan et al. Reference Chauhan, Gill and Preston2006b) that reduce seed bank life. Thus, in these systems seed bank decline will be more rapid for the dominant weed species: rigid ryegrass, wild radish, bromegrass, and wild oats (Chauhan et al. Reference Chauhan, Gill and Preston2006b; Kleemann and Gill Reference Kleemann and Gill2009; Martin and Felton Reference Martin and Felton1993; Reeves et al. Reference Reeves, Code and Piggin1981). With seedbank life already somewhat restricted in conservation cropping systems, the opportunity should be taken to further exploit this situation by preventing seed bank inputs.

The retention of high proportions of total seed production at maturity has been identified as a key biological attribute (weakness) of problematic annual weed species of Australian cropping. Rigid ryegrass, wild radish, bromegrass, and wild oats all retain significant proportions of total seed production at crop maturity (Walsh and Powles Reference Walsh and Powles2014). Thus, during crop harvest these seeds are collected, threshed, separated from the grain, and expelled from the harvester in the chaff fraction. Modern grain harvesters are typically fitted with straw and chaff residue spreading systems that redistribute this material back across the harvest swath. Ironically, it is this process that results in collected weed seeds being evenly distributed across the field and back into the seedbank (Barroso et al. Reference Barroso, Navarrete, Sánchez Del Arco, Fernandez-Quintanilla, Lutman, Perry and Hull2006; Blanco-Moreno et al. Reference Blanco-Moreno, Chamorro, Masalles, Recasens and Sans2004).

In Australia, for three decades now the harvest operation has also been recognized as a weed control opportunity (Gill Reference Gill1996; Matthews et al. Reference Matthews, Llewellyn, Powles and Reeves1996), representing the last chance during the growing season to restrict seed bank inputs of annual weed species. Importantly, annual weeds surviving to maturity in Australian cropping systems are likely to be herbicide resistant (Boutsalis et al. Reference Boutsalis, Gill and Preston2012; Broster et al. Reference Broster, Koetz and Wu2013; Broster and Pratley Reference Broster and Pratley2006; Owen et al. Reference Owen, Martinez and Powles2014; Owen et al. Reference Owen, Martinez and Powles2015). Subsequently, a number of harvest weed seed control (HWSC) systems have been developed for the specific purpose of targeting the seed production of these surviving weeds to restrict contributions to the seed bank (Walsh et al. Reference Walsh, Harrington and Powles2012; Walsh and Newman Reference Walsh and Newman2007; Walsh et al. Reference Walsh, Newman and Powles2013).

There are now a number of approaches used to target the weed seed–bearing chaff fraction: collection and burning (chaff cart), concentration in a narrow windrow with straw residues for burning (narrow-windrow burning), collection in bales along with straw residues (bale direct system), and mechanical destruction during harvest using the Harrington Seed Destructor (HSD). Previous studies on some of these systems have determined that high (>90%) levels of rigid ryegrass seed control can be achieved at harvest (Walsh et al. Reference Walsh, Harrington and Powles2012; Walsh and Newman Reference Walsh and Newman2007; Walsh and Powles Reference Walsh and Powles2007). The aim of this study was to establish the general efficacy of harvest weed seed control systems by comparing the impact of HSD, chaff cart, and narrow-windrow burning systems on rigid ryegrass populations across a range of western and southern Australian wheat belt region environments.

Materials and Methods

To evaluate the efficacy of HWSC systems across a range of crop production environments, a commercial harvester (9650 John Deere®) was used to establish 24 trial sites across the western and southern Australian crop production regions during the 2010 and 2011 harvests, respectively. To coincide with crop maturity, trial site establishment commenced in the northern Western Australia (WA) crop production region on November 8, then proceeded south and east through the region over a 6-wk period (Figure 1). Similarly, in 2011 the same harvester was used to establish 13 trial sites in the southern Australian cropping region. Commencing in the westernmost area of this region on December 2, trial sites were established while traveling east and north through the region. At each site, treatments were established under commercial harvest conditions in wheat crops with uniform low to moderate rigid ryegrass infestations (Table 1). The establishment and management of HWSC treatments was conducted as per standard commercial practices for the use of these techniques (Walsh et al. Reference Walsh, Newman and Powles2013). A chute was fitted to the rear of the harvester to concentrate chaff and straw residues into a narrow (500 mm) windrow during harvest. A trailing HSD system processed chaff material as it exited the harvester, establishing the HSD treatments. The same harvester was used to establish control (conventional harvest), narrow windrow burning, and HSD treatments. Chaff cart treatments, in which a harvester with a trailing cart was used to collect and remove chaff material from the plot areas, were established with equipment provided by a local farmer.

Figure 1 Harvest weed seed control trial sites established at 24 locations across the Australian wheat belt (shaded area) during the 2010 and 2011 wheat harvest period.

Table 1 Rigid ryegrass plant density and seed production above harvester cutting height (15 cm) in wheat crops immediately prior to harvest at 24 locations. Numbers in parentheses represent standard errors of the mean for four replicates.

Prior to harvest, rigid ryegrass plants were counted and seed heads above harvester cutting height (15 cm) were collected from 1- to 10-m2 quadrat areas across the trial site. Seed heads from each quadrat were bulked and subsequently threshed, and the collected seed counts provided a site average annual ryegrass plant seed production. HWSC treatments were established in 11 by 50 m strips in a randomized complete block design with four replicates. Chaff collected in the chaff cart treatment was dumped for burning in a location away from the plot area. At the start of the next growing season (April to May), when burning restrictions had been lifted, chaff heaps and narrow windrows were burned. Standard burning practices were used to ensure a complete burn of these residues, and therefore the destruction of collected weed seed.

As the major proportion of rigid ryegrass emergence results from the previous season’s seed production (Monaghan Reference Monaghan1980; Reeves and Smith Reference Reeves and Smith1975), the density of annual ryegrass that emerged the following growing season was used to assess HWSC efficacy. After the season-opening rains and prior to any herbicide treatments, rigid ryegrass emergence counts were conducted at each site to assess HWSC treatment effects. Rigid ryegrass plant densities were determined in each plot by counting plants in 0.1- to 20-m2 quadrats. An analysis of variance using SAS® statistical software (SAS Institute Inc., Cary, NC 27513) was performed on rigid ryegrass plant emergence counts. Due to site differences (P<0.05), analyses comparing HWSC treatments were performed individually for each location.

Results and Discussion

The high number of rigid ryegrass seeds retained at harvest highlights the fecundity of this species, but more importantly, the potential impact of HWSC on seed bank replenishment. Pre-harvest counts determined that the average rigid ryegrass plant density present at harvest across the 24 trial sites was 10 plants m−2, ranging from 1 to 26 plants m−2 (Table 1). These infestations have persisted through typical commercial weed control treatments during the growing season to mature with the wheat crop. With an average production of 209 seeds per plant, over 2000 seeds m−2 were retained above the low harvest height of 15 cm. Given that seed retained above this height represents approximately 85% of total seed production (Walsh and Powles Reference Walsh and Powles2014), these seed production levels are similar to previously recorded values for rigid ryegrass plants maturing in Australian wheat crops (Reeves Reference Reeves1976).

HWSC treatments were similarly effective in reducing the rigid ryegrass population emerging the following growing season. Across all 24 sites, chaff cart, narrow windrow burning, and HSD treatments each reduced (P<0.05) rigid ryegrass emergence compared to the untreated control (conventional harvest treatment) (Table 2). This is not surprising, as HWSC systems all target the weed seed–bearing chaff fraction exiting the harvester. Therefore, if chaff destruction operations of burning (chaff cart and narrow windrow) and mill processing (HSD) are conducted effectively (Walsh et al. Reference Walsh, Harrington and Powles2012; Walsh and Newman Reference Walsh and Newman2007), then it is expected that these systems will deliver similar effects on rigid ryegrass populations.

Table 2 Rigid ryegrass plant densities in response to harvest weed seed control treatments conducted during wheat harvest at 24 sites during 2010 and 2011. Treatment means followed by the same letter within each site are not different at LSD P≤0.05.

- Treatment not established at this site

HWSC treatments had a substantial impact on subsequent rigid ryegrass emergence, and that impact was more pronounced when population densities, and most likely seed bank levels, were lower. When averaged across 24 sites, HWSC treatments reduced the emergence of rigid ryegrass by 60% (Table 2). Given the number and distribution of trial sites across the Australian wheat belt, this value represents the expected result from the use of HWSC. There was considerable variation in HWSC efficacy between sites, with large reductions in rigid ryegrass emergence (70% to 90%) at Arthurton, Corrigin, and Old Junee, contrasting with lower reductions (30% to 40%) at Rand and Minnipa1. Emergence reflects both seed bank carryover and the previous season’s inputs; thus the observed results in the field are impacted by the residual seed bank despite the proven high efficacy (>90% seed kill) of HWSC treatments (Walsh et al. Reference Walsh, Harrington and Powles2012; Walsh and Newman Reference Walsh and Newman2007). Therefore, the average level of HWSC effect of 60% indicates that residual seed bank levels are having a significant influence on the efficacy of these systems. For example, lower reductions in emergence at some sites were likely due to a large seed bank; this is clearly indicated at sites where emergence was higher than the previous season’s seed production (e.g., Harden, Dookie). Seed bank persistence of rigid ryegrass is approximately 3 yr, but varies from 1 to 4 yr (Kleemann et al. Reference Kleemann, Preston and Gill2016; McGowan Reference McGowan1970; Peltzer and Matson 2002). Therefore, the observed impact of HWSC over time on rigid ryegrass populations will vary according to seed bank persistence, generally increasing as seed bank levels decline.

It is only with reduced seed bank inputs that annual weed populations can be controlled. The level of seed production from the average rigid ryegrass plant density in these studies resulted in the production of approximately 2000 seeds m−2. During a typical commercial harvest, this seed is evenly spread (seeded) across the field by the residue distribution systems of modern harvesters. Ironically, this seeding rate of 2000 seeds m−2 is more than double that recommended for rigid ryegrass pasture establishment (Launders et al. Reference Launders, Beale, Griffiths and Lattimore2010; Venuto et al. Reference Venuto, Redfearn, Pitman and Alison2004). Even with a 20% to 30% loss of viable seed resulting from predation, fatal germination, and decay (Chauhan et al. Reference Chauhan, Gill and Preston2006a), as well as seed bank retention due to dormancy, this seed bank recruitment will likely realize the establishment of >100 rigid ryegrass seedlings m−2 in the following growing season. Thus, not only is there a real opportunity, but an obvious need to intercept weed seed production at harvest using HWSC systems.

Acknowledgements

The authors wish to thank the Australian Herbicide Resistance Initiative (AHRI) staff and students for their assistance in processing samples. The success of the extensive harvest trial program was due to the tireless efforts and expertise of Todd and Kent Stone. We are particularly grateful for assistance from the many cooperative growers who freely provided their resources (time, labor, machinery, and land) for this research. This research was funded by the Grains Research and Development Corporation.

Footnotes

Associate Editor for this paper: Andrew Kniss, University of Wyoming.

References

Literature Cited

Barroso, J, Navarrete, L, Sánchez Del Arco, MJ, Fernandez-Quintanilla, C, Lutman, PJW, Perry, NH, Hull, RI (2006) Dispersal of Avena fatua and Avena sterilis patches by natural dissemination, soil tillage and combine harvesters. Weed Res 46:118128 CrossRefGoogle Scholar
Blanco-Moreno, JM, Chamorro, L, Masalles, RM, Recasens, J, Sans, FX (2004) Spatial distribution of Lolium rigidum seedlings following seed dispersal by combine harvesters. Weed Res 44:375387 CrossRefGoogle Scholar
Boutsalis, P, Gill, GS, Preston, C (2012) Incidence of herbicide resistance in rigid ryegrass (Lolium rigidum) across Southeastern Australia. Weed Technol 26:391398 CrossRefGoogle Scholar
Broster, JC, Koetz, EA, Wu, H (2013) Herbicide resistance levels in annual ryegrass (Lolium rigidum Gaud.) and wild oat (Avena spp.) in southwestern New South Wales. Plant Prot Quart 28:126132 Google Scholar
Broster, JC, Pratley, J (2006) A decade of monitoring herbicide resistance in Lolium rigidum in Australia. Aust J Exp Agric 46:11511160 Google Scholar
Chauhan, BS, Gill, G, Preston, C (2006a) Influence of environmental factors on seed germination and seedling emergence of rigid ryegrass (Lolium rigidum). Weed Sci 54:10041012 Google Scholar
Chauhan, BS, Gill, G, Preston, C (2006b) Influence of tillage systems on vertical distribution, seedling recruitment and persistence of rigid ryegrass (Lolium rigidum) seed bank. Weed Sci 54:669676 Google Scholar
Gill, GS (1996) Managment of herbicide resistant ryegrass in Western Australia - research and its adoption. Pages 542545 in Shepherd RCH, ed. 11th Australian Weeds Conference. Melbourne, Victoria, Australia: Weed Science Society of Victoria Google Scholar
Kleemann, SGL, Gill, GS (2009) Population ecology and management of rigid brome (Bromus rigidus) in Australian cropping systems. Weed Sci 57:202207 Google Scholar
Kleemann, SGL, Preston, C, Gill, GS (2016) Influence of management on long-term seedbank dynamics of rigid ryegrass (Lolium rigidum) in cropping systems of southern Australia. Weed Sci 64:303311 CrossRefGoogle Scholar
Launders, T, Beale, P, Griffiths, N, Lattimore, M (2010) Annual, Italian and Short Rotation Ryegrass Variaties 2010. http://www.dpi.nsw.gov.au/. Accessed August 1, 2016Google Scholar
Llewellyn, RS, D’Emden, FH, Kuehne, G (2012) Extensive use of no-tillage in grain growing regions of Australia. Field Crop Res 132:204212 Google Scholar
Martin, R, Felton, W (1993) Effect of crop rotation, tillage practice, and herbicides on the population dynamics of wild oats in wheat. Aust J Exp Agric 33:159165 Google Scholar
Matthews, JM, Llewellyn, R, Powles, S, Reeves, T (1996) Integrated weed management for the control of herbicide resistant annual ryegrass. Toowoomba, Australia: Australian Society of Agronomy. Pp 417420 Google Scholar
McGowan, A (1970) Comparative germination patterns of annual grasses in north-eastern Victoria. Aust J Exp Agric 10:401404 Google Scholar
Monaghan, NM (1980) The biology and control of Lolium rigidum as a weed of wheat. Weed Res 20:117121 CrossRefGoogle Scholar
Owen, MJ, Martinez, NJ, Powles, SB (2014) Multiple herbicide-resistant Lolium rigidum (annual ryegrass) now dominates across the Western Australian grain belt. Weed Res 54:314324 Google Scholar
Owen, MJ, Martinez, NJ, Powles, SB (2015) Multiple herbicide-resistant wild radish (Raphanus raphanistrum) populations dominate Western Australian cropping fields. Crop Pasture Sci 66:10791085 Google Scholar
Peltzer, SC, Matson, PT (2002) How Fast Do the Seedbanks of Five Annual Cropping Weeds Deplete in the Absence of Weed Seed Input? Perth, Western Australia: Plant Protection Society of Western Australia Inc. Pp 553555 Google Scholar
Reeves, TG (1976) Effect of annual ryegrass (Lolium rigidum Gaud.) on yield of wheat. Weed Res 16:5763 CrossRefGoogle Scholar
Reeves, TG, Code, GR, Piggin, CM (1981) Seed production and longevity, seasonal emergence and phenology of wild radish (Raphanus raphanistrum L.). Aust J Exp Agric Anim Husb 21:524530 CrossRefGoogle Scholar
Reeves, TG, Smith, IS (1975) Pasture management and cultural methods for the control of annual ryegrass (Lolium rigidum) in wheat. Aust J Exp Agric Anim Husb 15:527530 Google Scholar
Spafford Jacob, HS, Minkey, DM, Borger, C, Gallagher, RH (2006) Variation in post-dispersal weed seed predation in a crop field. Weed Sci 54:148155 Google Scholar
Venuto, BC, Redfearn, DD, Pitman, WD, Alison, MW (2004) Impact of seeding rate on annual ryegrass performance. Grass and Forage Sci 59:814 CrossRefGoogle Scholar
Walsh, MJ, Harrington, RB, Powles, SB (2012) Harrington seed destructor: A new nonchemical weed control tool for global grain crops. Crop Sci 52:13431347 Google Scholar
Walsh, MJ, Newman, P (2007) Burning narrow windrows for weed seed destruction. Field Crop Res 104:2440 CrossRefGoogle Scholar
Walsh, MJ, Newman, P, Powles, SB (2013) Targeting weed seeds in-crop: A new weed control paradigm for global agriculture. Weed Technol 27:431436 CrossRefGoogle Scholar
Walsh, MJ, Powles, SB (2007) Management strategies for herbicide-resistant weed populations in Australian dryland crop production systems. Weed Technol 21:332338 CrossRefGoogle Scholar
Walsh, MJ, Powles, SB (2014) High seed retention at maturity of annual weeds infesting crop fields highlights the potential for harvest weed seed control. Weed Technol 28:486493 CrossRefGoogle Scholar
Figure 0

Figure 1 Harvest weed seed control trial sites established at 24 locations across the Australian wheat belt (shaded area) during the 2010 and 2011 wheat harvest period.

Figure 1

Table 1 Rigid ryegrass plant density and seed production above harvester cutting height (15 cm) in wheat crops immediately prior to harvest at 24 locations. Numbers in parentheses represent standard errors of the mean for four replicates.

Figure 2

Table 2 Rigid ryegrass plant densities in response to harvest weed seed control treatments conducted during wheat harvest at 24 sites during 2010 and 2011. Treatment means followed by the same letter within each site are not different at LSD P≤0.05.