This and the following paper were first presented at the RIN01 Conference held in Oxford under the auspices of the Animal Navigation Special Interest Group, April 2001.

Flight paths of homing pigeons were measured with a newly developed recorder based on GPS. The device consists of a GPS receiver board, a logging facility, an antenna, a power supply, a DC-DC converter and a casing. It has a weight of 33 grams and works reliably with a sampling rate of 1 Hz for an operating time of about three hours, providing time-indexed data on geographic positions, ground speed and altitude. The devices are fixed to the birds with a harness, and the data are downloaded when the bird is re-captured. The measured flight paths show many details : for example, initial loops flown immediately after release and large detours flown by some pigeons. Three examples of flight paths are presented from a release site 17·3 km northeast of the home loft in Frankfurt. Mean speed in flight, duration of breaks and total length of the flight path were calculated. The pigeons chose different routes and have different individual tendencies to fly loops over the village close to the release site.

This paper was first presented at the RIN97 Conference held in Oxford under the auspices of the Animal Navigation Special Interest Group, April 1997.

Migrating species may utilise hydrostatic pressure. In the aquatic environment, hydrostatic pressure changes much more rapidly than in air. In shallow water, tidal changes will impose larger percentage changes on organisms than those experienced in deep water. Small changes in pressure often cause locomotion (barokinesis) accompanied by orientation to light or gravity, often partially compensating for the equivalent depth change. Until recently, identification of hydrostatic pressure receptors without a gas phase has proved elusive, but it is now known that thread hair receptors in the statocyst of the shore crab Carcinus maenas respond to small changes in hydrostatic pressure. Using a tide machine, the responses of thread hairs to sinusoidally changing pressure cycles have been examined, and this paper reports progress monitoring this receptor and making long-term recordings from hydrostatic pressure sensitive pathways in the crab's nervous system.

Within the implementation of the European Geo-stationary Navigation Overlay System (EGNOS), a significant residual error in positioning is due to tropospheric delay effects. The EGNOS guidelines recommend that tropospheric delay is modelled using an empirical correction algorithm based on a receiver's height and estimates of meteorological parameters developed from average and seasonal variation data. However, such a simple average and seasonal variation model is unlikely to emulate temporal weather changes exactly. The potential errors involved in the application of the recommended algorithm and the consequent effects on the positioning errors, under typical UK weather conditions, are detailed in this paper. This was achieved by comparing tropospheric delays produced by the EGNOS model, with tropospheric delays estimated from high precision carrier phase GPS, over a one-year period for five UK stations. The RMS EGNOS model zenith tropospheric delay errors ranged from 4·0 to 4·7 cm, with maximum errors ranging from 13·2 to 17·8 cm. The errors were also shown to be spatially correlated. The subsequent effect on position error is shown to be dependent on the satellite elevation cut-off angle adopted and on whether or not the observations are weighted according to the satellite elevation angle.

The idea of incorporating radar systems into vehicles to improve road traffic safety dates back to the 1970s. Such systems are now reaching the market as recent advances in technology have allowed the signal processing requirements and the high angular resolution requirements from physically small antennas to be realised. Automotive radar systems have the potential for a number of different applications including adaptive cruise control (ACC) and anti-collision devices. This paper summarises recent developments in test methods that have been made to satisfy the compliance requirements for emissions and immunity.