Unmanned aerial vehicles (UAVs), which are available in our lives in many areas today, bring with them new expectations and needs along with developing technology. In order to meet these expectations and needs, main subjects such as reducing energy consumption, increasing thrust and endurance, must be taken into account in UAV designs. In this study, Backtracking search optimisation (BSO) algorithm-based adaptive neuro-fuzzy inference system (ANFIS) model is proposed for the first time to improve UAV thrust. For this purpose, first, different batteries and propellers were tested on the thrust measuring device and a data set was obtained. Propeller diameter and pitch, current, voltage and the electronic speed controller (ESC) signal were selected as input, and UAV thrust was selected as output. ANFIS was used to relate input and output parameters that do not have a direct relationship between them. In order to determine the ANFIS parameters at the optimum value, ANFIS was trained with the obtained data set by using BSO algorithm. Then, the objective function based on the optimum ANFIS structure was integrated into BSO algorithm, and the input values that gave the optimum thrust were calculated using BSO algorithm. Simulation results, in which parameters such as engine, battery and propeller affecting the thrust are taken into account equally, emphasise that the proposed method can be used effectively in improving the UAV thrust. This hybrid method, consisting of ANFIS and BSO algorithm, can reduce the cost and time loss in UAV designs and allows many possibilities to be tested.

In this paper, a new approach to modeling and controlling the problems associated with a morphing unmanned aerial vehicle (UAV) is proposed. Within the scope of the study, a dataset was created by obtaining a wide range of aerodynamic parameters for the UAV with Ansys Fluent under variable conditions using the computational fluid dynamics approach. For this, a large dataset was created that considered 5 different angles of attack, 14 different swept angles, and 5 different velocities. While creating the dataset, the analyses were verified by considering studies that have been experimentally validated in the literature. Then, an artificial intelligence-based model was created using the dataset obtained. Metaheuristic algorithms such as the artificial bee colony algorithm, ant colony algorithm and genetic algorithms are used to increase the modeling success of the adaptive neuro-fuzzy inference system (ANFIS) approach. A novel modeling approach is proposed that constitutes a new decision support system for real-time flight. According to the results obtained, all the ANFIS models based on metaheuristic algorithms were more successful than the traditional approach, the multilinear regression model. The swept angle that meets the minimum lift needed by the UAV for different flight conditions was estimated with the help of the designed decision support system. Thus, the drag force is minimised while obtaining the required lift force. The performance of the UAV was compared with the nonmorphing configuration, and the results are presented in tables and graphs.

The stabilisation and control mechanisms of an Unmanned Aerial System (UAS) must be properly designed to ensure acceptable flight performance. During their operation, these mechanisms are subjected to unknown and random environmental effects, making it imperative that all available information should be taken into consideration during the mechanisms’ design process (e.g. system dynamics, actuators, flight conditions and certain criteria requirements such as phugoid and short modes for longitudinal dynamics, and roll subsidence, spiral and Dutch-roll modes for lateral dynamics) in order to guarantee flight stability. Therefore, this paper introduces a novel methodology for the stabilisation and control of the UAS-S45 Bálaam, designed and manufactured by Hydra Technologies. This methodology uses composite controllers that combine feedback Linear Quadratic Regulators (LQR) and Proportional Integral Feed-Forward (PI-FF) compensation controller for stabilisation and tracking tasks, respectively. Furthermore, a Generalised Extended State Observer was implemented to provide robustness to the closed loop dynamics by introducing disturbance compensation. Furthermore, an Adaptive Neuro-Fuzzy Inference System (ANFIS) was adopted to perform a gain scheduling by computing the gains of each composite controller for certain unknown trim conditions within a given flight domain. Finally, several numerical assessments were performed to highlight the efficiency of the proposed methodology.

The multipath effect and Non-Line-Of-Sight (NLOS) reception of Global Positioning System (GPS) signals both serve to degrade performance, particularly in urban areas. Although receiver design continues to evolve, residual multipath errors and NLOS signals remain a challenge in built-up areas. It is therefore desirable to identify direct, multipath-affected and NLOS GPS measurements in order improve ranging-based position solutions. The traditional signal strength-based methods to achieve this, however, use a single variable (for example, Signal to Noise Ratio (C/N0)) as the classifier. As this single variable does not completely represent the multipath and NLOS characteristics of the signals, the traditional methods are not robust in the classification of signals received. This paper uses a set of variables derived from the raw GPS measurements together with an algorithm based on an Adaptive Neuro Fuzzy Inference System (ANFIS) to classify direct, multipath-affected and NLOS measurements from GPS. Results from real data show that the proposed method could achieve rates of correct classification of 100%, 91% and 84%, respectively, for LOS, Multipath and NLOS based on a static test with special conditions. These results are superior to the other three state-of-the-art signal reception classification methods.