The current trends in stimulated Brillouin scattering and optical phase conjugation are overviewed. This report is formed by the selected papers presented in the “Fifth International Workshop on stimulated Brillouin scattering and phase conjugation 2010” in Japan. The nonlinear properties of phase conjugation based on stimulated Brillouin scattering and photo-refraction can compensate phase distortions in the high power laser systems, and they will also open up potentially novel laser technologies, e.g., phase stabilization, beam combination, pulse compression, ultrafast pulse shaping, and arbitrary waveform generation.

A non-collinear laser beam combination based on Brillouin amplification is proposed. The influence of non-collinear Brillouin amplification on the combination efficiency is analyzed and discussed theoretically. It is shown that an efficiency of 80% can be achieved with the angle between the Stokes and the pump limited to a range of 10°. The theoretical prediction is tested in experiment of non-collinear amplification of one Stokes and one pump. A two-beam combination scheme is designed and a high combination efficiency of 80% is also obtained in this experiment. According to these results, a 20-beam combination scheme is designed to achieve 13.2-J output energy. A very simple construction for a multiple beams combination is designed.

In order to measure the phase conjugation-fidelity of stimulated Brillouin scattering with high pump energy more accurately and conveniently, a new measurement is proposed. According to the definition of the fidelity with optical field correlated integral, the method of recording the far-field by array camera is analyzed theoretically. By the method, an experiment for high energy stimulated Brillouin scattering is arranged, and the maximum energy of 3.42 J is achieved in a single-cell stimulated Brillouin scattering generator. For small pump pulse, the fidelity maintains a high value of more than 0.9. However, the reflectivity fluctuation is significant when the pump energy is larger than 1.5 J. As a result, the fidelity decreases gradually to 0.5 at the pump energy of 3.42 J. The reflectivity shows the same character of great fluctuation as the fidelity at high pump energy.

The beam combination method using stimulated Brillouin scattering phase conjugate mirrors (SBS-PCMs) is a promising technique for a high energy and high power laser output operating with a high repetition rate. The two-beam combined system was previously demonstrated with an amplitude dividing method. A four-beam combined laser system with amplitude dividing method is demonstrated in this work, and the phase stabilization experiment of this system is performed using the self phase control and the long-term stabilization technique. The phase differences between the SBS waves are stabilized with λ/30 and the fluctuation of the four-beam combined output energy is 6.16% during 2000 shots (200 s).

An overview on current trends in stimulated Brillouin scattering and optical phase conjugation is given. This report is based on the results of the “Second International Workshop on stimulated Brillouin scattering and phase conjugation” held in Potsdam/Germany in September 2007. The properties of stimulated Brillouin scattering are presented for the compensation of phase distortions in combination with novel laser technology like ceramics materials but also for e.g., phase stabilization, beam combination, and slow light. Photorefractive nonlinear mirrors and resonant refractive index gratings are addressed as phase conjugating mirrors in addition.

A new concept of laser fusion driver is proposed, which uses a beam combination technique with stimulated Brillouin scattering phase conjugate mirror (SBS-PCM). It is constructed systematically with a cross-type amplifier as a basic unit. In the first part of this paper, we introduce the cross-type laser amplifier using SBS-PCM, with several advantages by experimental results. These advantages are the ideal properties for practical laser fusion driver, such as the perfect isolation of leak beam, the compensation of thermally induced birefringence through the amplifiers, the easy maintenance and alignment insensitiveness, and the freely-scale-up energy. Next, some successful results for the phase control of SBS-PCM are presented, which is one of the main problems in the current beam combination laser using SBS-PCM. Particularly, a new technique for controlling the phase of SBS-PCM, “self-density modulation,” is introduced, which is the simplest ever among those reported. With the advantages of the cross-type amplifier using SBS-PCM and the novel method for controlling the phase of SBS-PCM, the proposed beam combination laser system is presented as the most promising one, which can contribute to the realization of high energy laser that can operate with high repetition rate over 10 Hz, even in the case of huge output energy over MJ.

Based on transferring energy from multiple pump beams into one Stokes beam using Brillouin amplification, a serial coherent laser beam combination scheme is presented, which has many advantages, such as, simple structure, low cost, ease of adjustment, higher load capability, scalable easily, etc. Furthermore, it has been demonstrated that the combination of several beams using this method is theoretically possible. But in practice, the amplification of high power Stokes beam is a key problem to solve. In this paper, the amplification of Stokes beam whose power is higher than the pump beam is first studied and proved experimentally. Coupling the two laser beams by this method is proved experimentally, and the coupling efficiency reaches more than 80%. Then the feasibility of multiple beams combination based on Brillouin amplification is analyzed and tested theoretically.

Laser fusion requires very high energy/power output with high repetition rate over 10 Hz, which is very difficult with the current laser technologies. However, the recent research work on the phase controlling of the stimulated Brillouin scattering wave enables the realization of this kind of laser fusion driver. The recent progress of controlling the phase has been successfully demonstrated by the self-generated density modulation method proposed by one of the authors (Kong). Nevertheless, it showed a long-term fluctuation of the phase because of the long-term fluctuation of the density of the SBS medium due to the thermal fluctuation. This long-term thermal fluctuation is inevitable a fact in nature. The authors used a specially designed stabilizing system for the phase controlling system, which has the PZT control of the mirror for phase controlling SBS-PCM (the so-called feedback mirror). This system stabilizes the phase controlling system very well for more than 1 h. This technique will help the laser fusion driver to be realized sooner than expected. In addition, we propose a similar scheme to be applied to the ultra-fast pulse laser system, which must operate at high repetition rate for the laser fusion energy power plant.

For achieving practically useful laser fusion energy generation, it is necessary to have a M-J laser system with a repetition rate over 10 Hz. We believe that a beam combination method using stimulated Brillouin scattering phase conjugate mirrors (SBS-PCM) is one of the most practical techniques for achieving the high repetition rate of the high power laser. In this paper, we present the recent results about the beam combination laser, such as SBS reflectivity depending on the mode structure, the cross type isolator, and the phase-locking technique. For the phase-locking technique, especially, the self-phase-locking is proposed and its result is discussed.

A beam combination laser with stimulated Brillouin scattering-phase conjugate mirrors (SBS-PCMs), which is expected to produce a high output energy and power with a repetition rate over 10 Hz, is a candidate for a practically useful laser fusion driver in the future. In order to develop the beam combination laser with SBS-PCMs, it is necessary to control the phase of each SBS wave whose phases are known as inherently random. We have proposed a new phase control technique and demonstrated experimentally that the relative phase difference between two SBS waves can be controlled to a certain value and locked to it with an accuracy less than λ/4. Additionally we have proposed and demonstrated a new technique to preserve the pulse shape of the SBS wave. Based on these experimental results, we have proposed two schemes of the new schemes for the high repetition and high energy/power beam combination laser system (laser fusion driver) using the SBS-PCMs of amplitude division and wave-front division techniques, which can operate with repetition rate over 10 Hz, in this paper.