We introduce a new technique for the design of an output combiner for Doherty power amplifier (DPA) and its effective exploitation for the development of a wideband laterally diffused metal oxide semiconductor (LDMOS) DPA. The design is enabled by a two-line impedance inverter for the DPA back-off operation, which is capable of 52% of fractional bandwidth. The technique is validated by the development of a DPA prototype for Ultra high frequency terrestrial digital video broadcast (DVB-T) applications, with optimized peak power and efficiency over 470–806 MHz. The prototype delivers between 40 and 53% of average efficiency across the band, at 49 dBm output power in average across the bandwidth, and supporting DVB-T signals with 8 MHz bandwidth and a peak-to-average power ratio of 10.5 dB. It achieves the target adjacent channel power ratio of −52 dBc at 750 MHz if digital pre-distortion is applied, and provides 47.8 dBm of output power with a drain efficiency of 44.3%.

A method for improving range resolution in passive radar system is to jointly use more than one transmission channel of the same illuminator of opportunity (IO). This paper specifically focuses on the exploitation of multiple adjacent digital video broadcasting-terrestrial (DVB-T) channels for achieving high-range resolution profiles with a passive radar system operating in air surveillance scenario. Firstly, we present an analysis of the ambiguity function obtained from a multichannel DVB-T source and a pre-processing technique able to improve the characteristics of the multichannel signal are presented. Afterwards, the experimental scenario is defined and detection results on aerial targets are shown.