A closely confined coplanar waveguide (CPW) fed MIMO antenna sheltering the entire ultra-wideband (UWB) spectrum with high isolation as well as dual-band rejection attributes is presented and evaluated. The intended wideband multiple-input multiple-output (MIMO) radiator embodies a pair of similar planar monopole elements (PME) together with the integration of the ingredients like a defected ground structure with Koch fractal boundaries, parasitic strips, cross-linked C-shaped parasitic resonators, and a Hilbert fractal neutralization line. The suggested UWB MIMO antenna houses an extensive bandwidth spanning between 2.64 and 12 GHz, sharply rejecting a pair of bands centered at 3.3 and 4.5 GHz. The wideband diversity antenna is realized in a closely packed measure of 26.50 mm (L) × 29.84 mm (W). A minute inter-element spacing of 0.51 mm is attained with the suggested layout. The numerical and experimental investigations of vital diversity parameters such as the envelope correlation coefficient, mean effective gain, total active reflection coefficient, as well as multiplexing efficiency depict high diversity performance. The consistency amidst the simulation as well as the empirical results recommends the worthiness of the intended antenna for handy UWB and UWB MIMO systems.

In this paper, a ultra-wideband (UWB) bandpass filter with stopband characteristics is presented using a multi-mode resonator (MMR) technique. An MMR is formed by loading three dumbbell-shaped (Mickey and circular) shunt stubs placed in the center and two symmetrical locations from ports, respectively. Three circular and arrowhead defected ground structures on the ground plane are introduced to achieve UWB bandwidth with a better roll-off rate. The proposed filter exhibits stopband characteristics from 10.8 to 20 GHz with a 0.4 dB return loss. The group delay and roll-off rate of the designed filter are <0.30 ns in the passband and 16 dB/GHz at lower and higher cut-off frequencies, respectively. The dimension of the filter is 0.74λg × 0.67λg mm2 and was fabricated on a cost-effective substrate. All simulated results are verified through the experimental results.

In this study, a new ultra-wideband (UWB) band-edge selectivity antenna with a modified radiation slot using defected ground structure (DGS) is presented to obtain bandpass filtering reflection coefficient and gain performance. The well-designed DGS is designed on backside metallic of the substrate and can be seen as a low-pass filter that provides a good roll-off at a higher frequency. By connecting the DGS and the stepped slot and making them merge with each other, good cut-off property in the upper passband and better in-band impedance characteristics are obtained. Measured results show that the proposed design not only shows good band-edge selectivity in reflection coefficient and gain performance but also has a good impedance matching of −13.5 dB reflection coefficients and a good radiation efficiency of 90% in the operating frequencies. The measured bandwidth defined with the reflection coefficient less than −10 dB is from 3.1–11.2 GHz. Furthermore, the size of the filtering UWB antenna is 22 mm × 12 mm, which is smaller than many individual UWB antennas and UWB filters.

In this paper, a frequency reconfigurable microstrip slot antenna for ultra-wideband applications with switchable band-notch functions is designed and manufactured. To generate a wide usable fractional bandwidth of 3 to over 13.6 GHz, square patch transforms to a fork-shaped patch, also two triangular-shaped strips have been added at above sections of rectangular slot on the ground plane. Band rejections are obtained by adding two inverted L-shaped strips in the fork-shaped patch and one L-shaped defected ground structure. Moreover, by implementation of two PIN diodes within the antenna structure, four switchable frequency responses are achieved. The designed antenna has simple structure and a small size of 20 × 20 × 0.8 mm3 while providing band rejection characteristics at WiMAX (Worldwide Interoperability for Microwave Access) and WLAN (Wireless Local Area Networks) systems.

In this paper a novel low pass filter (LPF) design procedure is proposed for electromagnetic bandgap based microstrip filters without using classical filter design approach. LPF is designed for ultra-wide stopband and sharp roll-off rate via proposed design procedure. It has been shown that finite periodic fan-shaped defected ground structures (FSDGSs) and double radial stubs (DRSs) yield broad stopband and very sharp transition band. The proposed LPF has −3 dB passband from dc to 1.49 GHz, and −20 dB broad stopband from 1.65 GHz up to 7.41 GHz. Full wave electromagnetic (EM) simulation of the proposed filter is achieved with ANSYS's High Frequency Structure Simulator (HFSS) and equivalent circuit (EC) model of the filter is proposed and verified via Applied Wave Research (AWR) software. To verify the simulations, filter is realized on ARLON AD1000 substrate, and measured with Agilent 5245A PNA-X Vector Network Analyzer. Measurement results of fabricated filter are in good agreement with EM and EC simulations.

In the present work, a novel multistrip monopole antenna fed by a cross-shaped stripline comprising one vertical and two horizontal strips has been proposed for wireless local area network (WLAN)/Industrial, Scientific, and Medical band (ISM)/International Mobile Telecommunication (IMT)/BLUETOOTH/Worldwide Interoperability for Microwave Access (WiMAX) applications. The designed antenna has a small overall size of 20 × 30 mm2. The goal of this paper is to use defected ground structure (DGS) in the proposed antenna design to achieve dual-band operation with appreciable impedance bandwidth at the two operating modes satisfying several communication standards simultaneously. The antenna was simulated using Computer Simulation Technology Microwave Studio (CST MWS) V9 based on the finite integration technique (FIT) with perfect boundary approximation. Finally, the proposed antenna was fabricated and some performance parameters were measured to validate against simulation results. The design procedure, parametric analysis, simulation results along with measurements for this multistrip monopole antenna using DGS operating simultaneously at WLAN (2.4/5.8 GHz), IMT (2.35 GHz), BLUETOOTH (2.45 GHz), and WiMAX (5.5 GHz) are presented.