Standards IEC 62288:2014 and MSC.191(79) require information on the displays of shipboard navigation systems to be logically grouped, but only provide limited specification for this ‘logical’ criterion. Meanwhile, complex interfaces and information overload remain as major design issues, being connected to several maritime accidents. To address this matter, a three-phase study was conducted to develop a pattern to organise essential information on Radar and Electronic Chart Display and Information System (ECDIS) displays and their equivalent modules on integrated navigation systems and integrated bridge systems. The first phase involved identifying the information most essential for safe navigation using cognitive task analyses, equipment performance standards and frequency of use. The second phase involved a card-sorting experiment with seafarers (n = 63) to develop an initial grouping pattern for the identified essential information. The third phase involved validating the initial grouping pattern with a new sample of seafarers (n = 35). The result is a pattern to group 48 types of information on shipboard navigation displays into 13 groups. The paper details the selected methods and the findings, and provides implications for future research.

When conducting accident analysis, the assessment of risk is one of the important links. Moreover, with regards to crew training, risk cognition is also an important training subject. However, most of the existing researches only rely on a single or a few data sources. It is necessary to fuse the collected multi-source data to obtain a more comprehensive risk evaluation model. There are few studies on the three-dimensional (3D) multi-modal data-fusion-based trajectory risk cognition. In this paper, a fuzzy logic-based trajectory risk cognition method is proposed based on multi-model spatial data fusion and accident data mining. First, the necessity of multi-model spatial data fusion is analysed and a data-fusion-based scene map is constructed. Second, a risk cognition model fused by multiple factors, multi-dimensional spatial calculations as well as data mining results is proposed, including a novel ship boundary calculation approach and newly constructed factors. Finally, a radar chart is used to illustrate the risk, and a risk cognition system is developed. Experiment results confirm the effectiveness of the method. It can be applied to train human operators of unmanned ship systems.

The purpose of this study is to test eye tracking in studying the usability of electronic chart display and information systems (ECDIS), one of the major components of ships’ bridge navigation systems. The carriage and adequate use of ECDIS on merchant ships is mandated by international regulations to improve maritime safety. The aim of this study is to test eye tracking as an assessment tool for usability of ECDIS. Eye movement data, collected from experienced port pilots operating on three different models of ECDIS, was analysed for the study. Significant differences were found between time to first fixation measurements among three different ECDIS models, as well as differences in heat map visualisations between the participant port pilots and expert users. The results indicate that eye tracking is an effective tool for assessment of the usability of ECDIS. The study, aiming potentially to improve the effectiveness of bridge navigation systems, proposes the integration of eye tracking in research and development of ECDIS, and contributes scientifically to research on eye tracking in marine transportation.

Navigational information is of great significance to the safety of maritime navigation. To better guarantee navigator safety and improve navigation efficiency, an applied model of geographic information services (GI services) that consists of an operational architecture, several subsystems and multiple GI services is presented. This work is an e-navigation testbed that follows e-navigation technical architecture and integrates a large amount of navigation-related resources. Real-time, location-based and on-demand digital navigational information can be exchanged and applied in a standardised way. An experiment conducted in the Pearl River Estuary area of the South China Sea showed that application of GI services in e-navigation can supplement the existing methods of exchanging navigational information and better assist navigators in decision making. Furthermore, the proposed model is adaptable and could be easily applied in other areas.

Vessel traffic in the Arctic is expanding in volume both within and transiting the region, yet the infrastructure necessary to support modern ship navigation is lacking. This includes aids to navigation such as buoys and beacons that can be difficult to place and maintain in this hostile environment that stretches across vast distances. The results of research are described which determine whether virtual electronic Aids to Navigation (eAtoN) existing entirely as digital information objects can overcome the practical limitations of physical aids to navigation (AtoN) and Automatic Identification System (AIS) radio eAtoN. Capabilities unique to virtual eAtoN that are not available using either physical or AIS radio technologies are also examined including dynamic and real time properties and immunity to Global Navigation Satellite System (GNSS) and AIS spoofing, aliasing, denial of service attacks and service outages. Conclusions are provided describing potential methods of deployment based upon similar concepts already in use.

This paper presents the results of research on the fusion of tracking radar and an Automatic Identification System (AIS) in an Electronic Chart Display and Information System (ECDIS). First, the concept of these systems according to the International Maritime Organization (IMO) is described, then a set of theoretical information on radar tracking and the fusion method itself is given and finally numerical results with real data are presented. Two methods of fusion, together with their parameters, are examined. A proposal for calculating the covariance matrix for radar and AIS data is also given, and the paper ends with conclusions.

Large container ships can only be berthed in hub ports with deep water, which requires a feeder ship service to transit and transport containers from the hub ports. This paper presents a feeder routing optimisation method for container ships through an intelligent Electronic Chart Display and Information System (ECDIS). ECDIS has been adopted to design routes and calculate the estimated time of arrival in two ports, and a mixed integer programming model is established for container vessel regional transportation where the shortest ship sailing time is designated as the objective function. In this paper, through using heuristic tour-route coding, the solution of the model based on genetic algorithms is presented to select ship capacities and routes simultaneously. Taking the Pearl River in China as an example, for different types of vessel capacity, vessel costs and fuel costs, 100 TEU and 150 TEU ship capacities with six optimal routes are selected to minimise sailing time and operating costs.

An Electronic Navigational Chart (ENC) is a two-dimensional abstraction and generalisation of the real world and it limits users' ability to obtain more real and rich spatial information of the navigation environment. However, a three-dimensional (3D) chart could dramatically reduce the number of human errors and improve the accuracy and efficiency of manoeuvring. Thus it is important to be able to visualize charts in 3D. This article proposes a new model for future Electronic Chart Display and Information Systems (ECDIS) and describes our approach for the construction of web-based multi-resolution future ECDIS implemented in our system Automotive Intelligent Chart (AIC) 3D ECDIS, including multi-resolution riverbed construction technology, multi-layer technology for data fusion, Mercator transformation of the model, rendering and web publishing methods. AIC 3D ECDIS can support global spatial data and 3D visualization, which merges the 2D vector electronic navigational chart with the three-dimensional navigation environment in a unified framework and interface, and is also published on the web to provide application and data service through the network.

The aim of this paper is to give insight into the day-to-day navigation of a modern day cruise vessel – in this case a state of the art 77,000 GRT vessel – 261 metres long with an 8·0 metre draft, carrying 2270 passengers and 910 crew. The ship operates mainly in the Caribbean in winter and Europe – Mediterranean and Scandinavia – in the summer. The instructions are my own, which supplement the Company's (which at present do not fully cover a full Electronic Chart Display and Information System (ECDIS) operation) and have been written to ensure all Bridge Officers fully understand how I expect to operate the Bridge at sea and in confined waters using ECDIS as the main navigation system. The paper is presented in its user format and is a copy of my orders as written.

Licensed mariners carried out two simulated navigation studies testing electronic chart and information display systems (ECDIS) against paper chart navigation. In the first study, six mariners each completed approaches to Halifax, Nova Scotia, harbour with good and bad visibility and a range of wind and currents. Conditions included chart with radar, ECDIS with radar overlay and ECDIS with separate radar. ECDIS produced better performance and a smaller workload than paper charts and the radar overlay was slightly better than the separate radar display. In the second study, six new mariners completed exercises with low visibility and heavy or light radar traffic using ECDIS with radar overlay, ECDIS without overlay and ECDIS with optional overlay. Mariners preferred the optional overlay but all three conditions produced about equal performance. Based on mariners' performance and expressed preference, we recommend that ECDIS systems provide optional radar overlays.

This paper discusses the ship's navigation function, navigation processes, and navigational information. The relationship between these concepts and their substance are analysed in depth. However, the primary aim of this paper is to consider how the various types of navigational information and their content might be brought together in a logically defined structure as a Ship's Information System.