In this paper, control of a suspended cable-driven parallel robot has been experimentally investigated based on the dynamic model of the robot for object tracking purpose. In order to improve the tracking ability of the robot, three control approaches, namely kinematic PID, dynamic PD, and a kinematic sliding mode control (SMC), have been implemented, both on the Simscape and on the robot constructed at the Human and Robot Interaction Laboratory. Neural network controller and dynamic SMC have been implemented on the Simscape model. Afterward, the effectiveness of each approach has been investigated by employing the root mean square error (RMSE) index. Simulation and experimental results reveal the ability of each controller for precise and smooth control. For precise and real-time object tracking, YOLOv5-s and YOLOv4-tiny model are trained. By comparing the obtained index values, the kinematic PID demonstrates the best performance with the maximum RMSE value of 0.018 compared to other methods.

Particle swarm optimization (PSO) is a heuristic optimization algorithm and is commonly used for the tuning of PD/PID-type controllers. In this paper, PSO is applied for control gain tuning of a position domain PID controller in order to improve contour tracking performances of linear and nonlinear contours for a serial multi-DOF robotic manipulator. A new fitness function is proposed for gain tuning based on the statistics of the contour error, and pre-existed fitness functions are also applied for the optimization process, followed by some comparison studies. The PSO tuning technique demonstrated the same effectiveness in position domain controllers as in time domain controllers with the results being quite satisfying with low contour errors for both linear and nonlinear contours, and the proposed fitness function is proved to be on par with the pre-existed fitness functions.

The use of active control techniques has intensified in various control applications, particularly in the field of aircraft systems. This paper presents an investigation into the control of rigid-body and flexible motion of a twin rotor multi-input multi-output system (TRMS) using intelligent inverse-model-based control schemes. The TRMS is an aerodynamic test rig representing the control challenges of modern air vehicle. The augmented feedback PID and feedforward inverse-model-based control has led to good tracking response and vibration reduction of the TRMS, with the use of particle swarm optimisation (PSO). As a comparison, methods using PID controllers are also presented. Experimental results are obtained using the test rig, confirming the viability and effectiveness of the proposed methodology as opposed to conventional PID controllers. The results and evidence from this method are justified, presented and discussed.

In this paper, the dynamics and biomimetic control of an artificial finger joint actuated by two opposing one-way shape memory alloy (SMA) muscle wires that are configured in a double spring-biased agonist–antagonist fashion is presented. This actuation system, which was described in Part I, forms the basis for biomimetic tendon-driven flexion/extension and abduction/adduction of the artificial finger. The work presented in this paper centres on thermomechanical modelling of the SMA wire, including both major and minor hysteresis loops in the phase transformation model, and co-operative control strategy of the agonist–antagonist muscle pair using a pulse-width-modulated proportional-integral-derivation (PWM–PID) controller. Parametric analysis and identification are carried out based on both simulation and experimental results. The performance advantage of the proposed co-operative control is shown using the metacarpophalangeal joint of the artificial finger.

This research focuses on the issue of dynamic modeling and controlling a robotic manipulator attached to a compliant base. Such a system is known under the name macro–micro system, characterized by the number of control actuators being less than the number of state variables. The equations of motion for a two-link planar elbow arm mounted on an oscillatory base has been presented in this investigation. In order to study the sensitivity of tuning the PID parameters to achieve the desired performance, the Grey relational analysis has first been proposed. Therefore, the aim of this work is to apply Grey theory to optimize parameters for partial states feedback of a PID controller for such a structure. The experimental results of the proposed methodology also show that it is technically and economically feasible to develop a low-cost, reliable, automatic, less time-consuming controller for robotics mounted on oscillatory bases.