The paper presents a cylindrical diode with a rod anode for repetitive pulsed intense X-ray sources. The diode uses a massive anode of diameter 1 cm, thus increasing the lifetime of the energy converter. The diode gap is preliminary filled with ions produced by cathode flare in a vacuum discharge, allowing electron beam pinching at a voltage of <200 kV. In the mode of pinching, the diode is an efficient source of high-power X rays. At a distance of 20 cm from the X-ray source, the radiation dose per pulse is 0.4 R at a peak power of 7 × 106 R/s. The full-width at half-maximum of the radiation pulse is 40 ns. The power in the diode is 1.8 GW at a beam current of 10 kA and exceeds the maximum power of the generator operating onto a matched load with constant resistance.

Technique of a linear transformer allows now to build the generators of high power nanosecond pulses with the current rise time of ~100 ns without intermediate power compression stages. This technique is being examined for use in high current high voltage pulsed accelerators. Plasma-filled diode has several advantages over standard vacuum diode that allow to improve the accelerators parameters. In this paper, plasma-filled diode experiments are described on generation of e-beam in the linear transformer accelerator. Possibility of use in the diode of isolated parallel plasma channels has been proven for the e-beam generation with cross-sectional area up to 50 cm2. The beam with current of 100 kA at voltage more than 400 kV was generated in the plasma-filled diode. Energy transmission efficiency from primary storage into a beam is about 54%.