In this paper, a new formulation is proposed to evaluate the origin intensity factors (OIFs) in the singular boundary method (SBM) for solving 3D potential problems with Dirichlet boundary condition. The SBM is a strong-form boundary discretization collocation technique and is mathematically simple, easy-to-program, and free of mesh. The crucial step in the implementation of the SBM is to determine the OIFs which isolate the singularities of the fundamental solutions. Traditionally, the inverse interpolation technique (IIT) is adopted to calculate the OIFs on Dirichlet boundary, which is time consuming for large-scale simulation. In recent years, the new methodology has been developed to efficiently calculate the OIFs on Neumann boundary, but the Dirichlet problem remains an open issue. This study employs the subtracting and adding-back technique based on the integration of the fundamental solution over the whole boundary to develop a new formulation of the OIFs on 3D Dirichlet boundary. Several problems with varied domain shapes and boundary conditions are carried out to validate the effectiveness and feasibility of the proposed scheme in comparison with the SBM based on inverse interpolation technique, the method of fundamental solutions, and the boundary element method.

This study makes the first attempt to accelerate the singular boundary method (SBM) by the precorrected-FFT (PFFT) for large-scale three-dimensional potential problems. The SBM with the GMRES solver requires computational complexity, where N is the number of the unknowns. To speed up the SBM, the PFFT is employed to accelerate the SBM matrix-vector multiplication at each iteration step of the GMRES. Consequently, the computational complexity can be reduced to . Several numerical examples are presented to validate the developed PFFT accelerated SBM (PFFT-SBM) scheme, and the results are compared with those of the SBM without the PFFT and the analytical solutions. It is clearly found that the present PFFT-SBM is very efficient and suitable for 3D large-scale potential problems.

This article addresses the resolution of the inverse problem for the parameter identification in orthotropic materials with a number of measurements merely on the boundaries. The inverse problem is formulated as an optimization problem of a residual functional which evaluates the differences between the experimental and predicted displacements. The singular boundary method, an integration-free, mathematically simple and boundary-only meshless method, is employed to numerically determine the predicted displacements. The residual functional is minimized by the Levenberg-Marquardt method. Three numerical examples are carried out to illustrate the robustness, efficiency, and accuracy of the proposed scheme. In addition, different levels of noise are added into the boundary conditions to verify the stability of the present methodology.

This study investigates the applicability of the singular boundary method (SBM), a recent developed meshless boundary collocation method, for the analysis of two-dimensional (2D) thin structural problems. The troublesome nearly-singular kernels, which are crucial in the applications of SBM to thin shapes, are dealt with efficiently by using a non-linear transformation technique. Promising SBM results with only a small number of boundary nodes are obtained for thin structures with the thickness-to-length ratio is as small as 1E-9, which is sufficient for modeling most thin layered coating systems as used in smart materials and micro-electro-mechanical systems. The advantages, disadvantages and potential applications of the proposed method, as compared with the finite element (FEM) and boundary element methods (BEM), are also discussed.

In this paper, an improved singular boundary method (SBM), viewed as one kind of modified method of fundamental solution (MFS), is firstly applied for the numerical analysis of two-dimensional (2D) Stokes flow problems. The key issue of the SBM is the determination of the origin intensity factor used to remove the singularity of the fundamental solution and its derivatives. The new contribution of this study is that the origin intensity factors for the velocity, traction and pressure are derived, and based on that, the SBM formulations for 2D Stokes flow problems are presented. Several examples are provided to verify the correctness and robustness of the presented method. The numerical results clearly demonstrate the potentials of the present SBM for solving 2D Stokes flow problems.

This study proposes a new formulation of singular boundary method (SBM) to solve the 2D potential problems, while retaining its original merits being free of integration and mesh, easy-to-program, accurate and mathematically simple without the requirement of a fictitious boundary as in the method of fundamental solutions (MFS). The key idea of the SBM is to introduce the concept of the origin intensity factor to isolate the singularity of fundamental solution so that the source points can be placed directly on the physical boundary. This paper presents a new approach to derive the analytical solution of the origin intensity factor based on the proposed subtracting and adding-back techniques. And the troublesome sample nodes in the ordinary SBM are avoided and the sample solution is also not necessary for the Neumann boundary condition. Three benchmark problems are tested to demonstrate the feasibility and accuracy of the new formulation through detailed comparisons with the boundary element method (BEM), MFS, regularized meshless method (RMM) and boundary distributed source (BDS) method.