Experimental alteration of volcanic tuff from Almeria, southeastern Spain, was performed in solutions with different Na/K ratios (0.01, 1, 10, and 100), different total salt concentrations (0.01, 0.1, 0.2, 0.33, and 1 M), and in deionized water, at 60, 80, 120, and 160°C, for periods of 60, 90, 180, and 360 d. Two particle size fractions of volcanic tuff were used: 10–200 and 20–60 μm. Alteration products were examined by X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), laser-particle size analysis, scanning electron microscopy equipped with an energy dispersive X-ray spectrometer (SEM-EDS), image computer analysis, and transmission electron microscopy with microanalysis (TEM-AEM). XRD detected neoformed phases only in the products from experiments of 180–360 d at high temperatures (120–160°C), and with Na/K ratios above unity and in deionized water. The synthesized phase is a random mixed-layer illite-smectite (I-S) with 75% smectite. The quantity of newly formed I-S, determined by FTIR, ranged between 3–30%. There was no apparent change in grain size and shape of the grains after the experiments as compared to before.

SEM-EDS and TEM-AEM revealed the following alteration sequence: 1) intense etching on glass-grain surfaces; 2) formation of hemispherical morphologies on grain surfaces; 3) precipitation of very thin, individual flakes of illite-smectite on glass-grain surfaces; 4) development of I-S at the edges of glass grains; and 5) development of I-S honeycomb structures either covering large areas of the glass grains or resulting from the complete alteration of glass grains. A direct transformation of glass to I-S seems to be the major reaction mechanism, although there also is evidence of glass dissolution and subsequent I-S precipitation.

The mechanism for the kaolinization of smectite is extremely complex. The purpose of this study was to explore this mechanism by providing more microscopic information about kaolinite-smectite (K-S) intermediate phases. Crystal-chemical changes were investigated and integrated in a model of the transformation mechanism. Eight K-S samples from three localities, derived from volcanic ash beds, were studied using transmission and analytical electron microscopy (TEM, AEM) and high-resolution TEM (HRTEM). The study completes a previous investigation, using several analytical techniques. The samples cover the range of K-S composition available from the previously studied sample set. Analysis by TEM indicated the preservation of particle morphology throughout the process. Most K-S particles had anhedral, smectite-like morphology, and only the most kaolinitic specimen revealed the coexistence of anhedral and euhedral, hexagonal particles. Analytical electron microscopy showed large chemical variations within samples, corresponding to various degrees of smectite kaolinization. Comparison of chemical results (Si/Al) and d060 values (proxy for octahedral composition) with the extent of kaolinization from thermogravimetry (TG) indicates that chemical changes in the octahedral sheet occur mainly when the proportion of kaolinite is 40–70%. The results above are consistent with kaolinization occurring via layer-by-layer transformation through the progressive loss of individual tetrahedral sheets in smectite layers and subsequent chemical changes in the octahedral sheet. Such a mechanism would produce the results observed in this study: (1) most particles preserve their original morphology; (2) significant variation in terms of the extent of transformation of particles within samples, and (3) formation of crystal structures intermediate between those of smectite and kaolinite, with parts of the tetrahedral sheets missing (kaolinite-like patches). Such structures become least stable at kaolinite ∼50%, when the perimeter of the kaolinite-like patches is largest and chemical changes in the octahedral sheet can occur more easily. Kaolinite layers could not be resolved by HRTEM in most cases and showed lattice fringes corresponding to superstructures. A model was established to quantify kaolinite and smectite layers in the HRTEM images with results which matched TG-derived values.

Clay processes, mineral reactions, and element budgets in oceans continue to be important topics for scientific investigation, particularly with respect to understanding better the roles of chemistry, formation mechanism, and input from hydrothermal fluids, seawater, and non-hydrothermal mineral phases.To that end, the present study was undertaken.Thre e samples of submarine metalliferous sediments of hydrothermal origin were studied to investigate the formation of smectite, usually Fe-rich, which takes place in such environments.The samples are from the historical collection returned by the British HMS Challenger expedition (1872–1876) and kept at the Natural History Museum in London.The samples were collected from the vicinity of the Pacific–Antarctic Ridge and the Chile Ridge.The samples were analyzed by means of X-ray diffraction (XRD), chemical analysis, scanning electron microscopyenergy dispersive X-ray spectroscopy (SEM-EDX), infrared (IR), and transmission electron microscopyanalytical electron microscopy (TEM-AEM).After removal of biogenic calcite the samples appeared to consist mainly of two low-crystallinity phases mixed intimately: Fe/Mn (oxyhydr)oxides and a Si-Al-Mg- Fe phase of similar chemical characteristics to smectite and with variable proportions of the above elements, as indicated by XRD, IR, and SEM-EDX.In particular, analysis by XRD revealed the presence of highly disordered δ-MnO2.The TEM-AEM analysis showed that Fe/MnOOH particles have Fe/Mn ratios in the range 25–0.2 and textures changing from granular to veil-like as the proportion ofMn increased. The smectite-like material has the morphology and chemistry of smectite, as well as 10–15 Å lattice fringes. Selected area electron diffraction (SAED) patterns indicated a very poorly crystalline material: in some cases distances between diffraction rings corresponded to d values of smectite.The smectite composition indicated a main Fe-rich dioctahedral component with a substantialMg-rich trioctahedral component (total octahedral occupancy between 2.02 and 2.51 atoms per O10[OH]2). The (proto-) smectite is interpreted to have formed within the metalliferous sediment, as a slow reaction between Fe/MnOOH, seawater (providing Mg), detrital silicates from the continent (providing Si and Al), and X-ray amorphous silica of hydrothermal origin that adsorbed on Fe/MnOOH phases and deposited with them.This material is possibly in the process of maturation into well crystallized smectite.

The purpose of this study was to investigate the structural and chemical modifications of phyllosilicates that occur under natural conditions, using the progressive deformation of chlorite (sudoite) present in quartz-rich veins from the Internal Zone of the Rif range (Morocco) as the model system. Signs of chlorite deformation include kinks, chevron-like folds, and fractures. The samples also contain later, undeformed grains, which sealed the fractures or grew with (001) perpendicular to the compressive stress. Deformation-induced structural changes consist mainly of basal cleavages associated with ordered replacement of brucite sheets by hydrated layers, thus leading to irregular microdomains of mixed-layer chlorite-vermiculite and sudoite. Such structural modifications represent a mechanism for accommodating the compressive stress. Structural changes were accompanied by minor chemical ones, which lead from di,tri-chlorite (sudoite) to phases with a more trioctahedral character (mixed-layer chlorite-vermiculite). The hydration reaction occurred throughout a topotactic replacement of the pre-existing sudoite grains. Later, undeformed grains consist of mixed-layer chlorite-vermiculite intergrown with retrogressive kaolinite and minor Fe oxide, and are interpreted as having formed through a dissolution-precipitation process, during deformation. Retrogression of sudoite probably occurred during the latest stage of exhumation, in low-temperature conditions.

Transmission electron microscope-analytical electron microscope analyses have been carried out on secondary minerals from pillow basalts with various degrees of alteration from the Juan de Fuca Ridge (ODP Leg 168). The electron microscopic data indicate that the alteration products consist mainly of phyllosilicate mixtures. The least altered sample shows poorly crystalline phyllosilicates occurrring as flakes with 10 Å -spaced lattice fringes. They have compositions of celadonite mixed with smectite and/or Fe oxyhydroxides and Mg-rich smectite. Proceeding towards older, more altered basalts, the alteration products consist of: (1) poorly crystalline celadonite mixtures and Mg-rich smectite; and (2) phyllosilicates with a higher degree of crystallinity, showing lattice fringes with 9.1 Å -spacing and with a talc-like composition. Changes in phyllosilicate association occur as the type of alteration changes from an oxidizing, water-dominated system (occurrence of celadonite mixtures with Fe hydroxides) to a reducing, rock-dominated system (occurrence of Fe-smectite and talc-like mixtures).

Rhyolitic obsidian was reacted with natural waters to study the effect of water chemistry and biological activity on the composition and formation mechanisms of clay. Two sets of experiments (18 months, 6 years) used fresh, hypersaline water (Mg-Na-SO4-Cl- and NaCl-rich) and seawater. The 6-year experiments produced the transformation of obsidian into quartz, apparently by in situ re-crystallization (Cuadros et al., 2012). The most abundant neoformed clay was dioctahedral (typically montmorillonite), indicating chemical control by the glass (where Al > Mg). Altered glass morphology and chemistry in the 18-months experiments indicated in situ transformation to clay. Magnesium-rich (saponite) clay formed under water-chemistry control in the bulk and within biofilms with elevated Mg concentration (Cuadros et al., 2013). The contact between microbial structures and glass was very intimate. Glass transformation into quartz may be due to some characteristic of the obsidian and/or alteration conditions. Such combination needs not to be uncommon in nature and opens new possibilities of quartz origin.