Alternating eclogitic amphibolites, mica schists and orthogneisses in the Schobergruppe to the south of the Tauern Window suffered a post-Upper-Ordovician progressive deformation D1-D2 which produced parallel planar-linear structures in all the rocks. Zoned garnets, preferentially oriented zoned clinopyroxenes (Jd 35-42%) and albite (An 7-9%) give evidence of high-pressure metamorphism (550-650°C 14-16 kbar) of the metabasites. Ca-amphiboles crystallized during subsequent decompression. In a kyanite-staurolite-garnet mica schist 300 metres below the metabasites, garnetbearing assemblages grew synchronous with the development of foliations S1 and S2. Garnets are zoned with increasing XMg and decreasing-increasing-rcdecreasing Xca from cores to rims. Albitic plagioclase (An 1-3%) and micas are enclosed in garnet cores and rims, are in contact with garnet, and occur with garnet in microlithons. When these minerals are used for geothermobarometry, a prograde P-T evolution (460 to 680°C with coeval pressure variations which reach high-pressure conditions can be estimated. This suggests that garnet-plagioclase geobarometry with albitic plagioclase works in the relevant P-T field. Similar garnet zonation trends and a similarly shaped P-T path from mica schists of an adjacent region with late-Variscan cooling ages, points to an eady-Variscan age of the syn-D1-D2 high-pressure and subsequent amphibolite-facies metamorphism.

In order to better understand the formation and evolution processes of ultrahigh pressure (UHP) felsic rocks, we determined the ages of various domains of zircon and monazite crystals from the diamondiferous quartzofeldspathic rocks of the Saxonian Erzgebirge. According to cathodoluminescence imagery and Th/U ratios, three zircon zones were distinguished. Each was dated using several spot analyses from a sensitive high-resolution ion microprobe analysing Pb, U and Th isotopes. The results were: (1) core zone – 21 analyses: Th/U ≤ 40.023 and 337.0±2.7 Ma (2σ, combined 206Pb/238U-207Pb/235U age); (2) diamond-bearing intermediate zone – 23 analyses: Th/U ≥ 50.037 and 336.8±2.8 Ma; and (3) rim zone – 12 analyses: Th/U = 0.015–0.038 (plus one analysis of 0.164) and 330.2±5.8 Ma. The U-Pb obtained ages are virtually concordant. Furthermore, two oscillatory zoned zircon cores (Th/U ≥ 50.8) yielded (~concordant) ages of ~400 Ma. Six SHRIMP analyses of monazites gave an age of 332.4±2.1 Ma. In addition, Pb, Th and U contents in monazite were analysed with an electron microprobe (EMP). A mean age of 324.7±8.0 (2σ) Ma was acquired from 113 analyses.

By combining the defined ages with previously published P-T conditions, minimum velocities for burial and exhumation were estimated. In addition, we present a likely geodynamic scenario involving age data from the literature as well as this study: beginning 340 million years ago, gneisses at the base of a thickened continentalcrust (~1.8 GPa, 650ºC) were transported to depths of at least 130 km, possibly as deep as 250 km. Here they were heated (>1050ºC) and partially melted and as a result began to rise rapidly. The burial and subsequent ascent back to a depth of 50 km, where zircon rims and monazite formed, took only a few million years and perhaps significantly less.

The Limousin ophiolite (French Massif Central) occurs as elongate bodies forming a (nearly) continuous suture zone between two major lithotectonic units of the French Variscan belt. The mantle section of the ophiolite is made of diopside-bearing harzburgite, harzburgite and dunite characteristic of a lherzolite-harzburgite ophiolite type (LHOT). The plutonic section is essentially composed of troctolites, wehrlites and gabbros locally intruded by ilmenite-rich mafic dykes. All the rocks were strongly affected by an ocean-floor hydrothermal metamorphism. The composition and evolution of primary magmatic phases (olivine, clinopyroxene, plagioclase and spinel) throughout the lowermost magmatic sequence correspond to those described in oceanic cumulates (ODP data). The Limousin ophiolite is thus of MOR type instead of SSZ type. The whole lithological section, the mineral chemistry, the extensive hydrothermal oceanic alteration and the relatively thin crustal section are typical of a slow-spreading ridge ocean (i.e. Mid-Atlantic ridge). Comparison of the Limousin ophiolite with other ophiolites from European Variscides suggests that the oceanic domain was actively spreading during the Late Palaeozoic and extended from the Armorican massif to the Polish Sudetes.

The north coast of Cornwall, from Bude to Newquay, provides a continuous section through a major Variscan fold/thrust complex. Illite crystallinity studies have revealed a transition from diagenesis in the north to greenschist facies metamorphism in the south in the Upper Palaeozoic succession. More detailed studies of mineral assemblages in both metabasites and pelitic rocks support the regional pattern of metamorphism indicated by illite crystallinity, and show that locally in the Tintagel district, the grade of metamorphism may have reached middle to upper greenschist facies. An attempt to correlate the above data with temperatures (108–985°C) derived from O-isotope geothermometers is made. Interpretation of the metamorphic data presented helps to emphasize the tectonic importance of the major structures seen in the fold/thrust complex.

Fluorapatite grains with monazite inclusions and/or rim grains are described in two of four samples from a set of granulite-facies metapelites collected from the Variscan Schwarzwald, southern Germany. Fluorapatite in all four samples appears to have experienced some dissolution in the partial granitic melt formed during granulite-facies metamorphism. Monazite inclusions and rim grains are highly deficient in Th and are presumed to have formed from fluorapatite in association with partial melting during granulite-facies metamorphism. Monazite inclusions range from very small (<1 μm) and very numerous to small (1–2 μm), sometimes elongated, and less numerous; both types are evenly distributed throughout the fluorapatite grain interior. Monazite rim grains tend to be 1–10 μm. The formation of monazite inclusions is proposed to be due to dissolution-reprecipitation of the fluorapatite by the aqueous fluids inherent in the granitic melt. We propose that an increase in inclusion size coupled with a decrease in inclusion number is due to Ostwald ripening (interfacial energy reduction), which is greatly facilitated by the presence of an interconnected, fluid-filled porosity in the metasomatized fluorapatite. We further propose that monazite rim grains formed principally during partial dissolution of the fluorapatite in the granitic melt and to a lesser extent by partial dissolutionreprecipitation of the fluorapatite grain rim area allowing for the partial removal of (Y+REE). We conclude that fluorapatite, with monazite inclusions and rim grains, experienced partial dissolution in a H2O-rich peraluminous granitic melt compared to fluorapatite with monazite rim grains and no inclusions which reacted with a similar, relatively less H2O-rich melt. In contrast, monazite-free fluorapatite experienced partial dissolution in a comparatively H2O-poor, subaluminous, possibly peralkaline melt.

The tectonothermal evolution of a unit in the foreland fold-and-thrust belt of the Iberian massif is established using the conodont colour alteration index (CAI). The unit consists of two parts with different tectonothermal histories – the Esla nappe region and the Valsurbio region – separated by a synorogenic Carboniferous basin (Guardo–Valderrueda basin). The Esla nappe region evolved in diacaizonal conditions (corresponding to the diagenetic conditions of the pelites) whose palaeotemperatures were controlled by rock burial. Maximum values were reached before the emplacement of the thrust nappes, so tectonic superimposition is not registered by the CAI. Overburial due to the emplacement of the thrust units was prevented by simultaneous intense erosion. The geothermal gradient obtained for burial was c. 35 °C km−1 and the temperature reached by the older Cambrian rocks was c. 210–230 °C. The Valsurbio region was affected by an extensional tectonothermal post-orogenic event that gave rise to metamorphism with ancaizonal or epicaizonal conditions (corresponding to anchizone or epizone of the pelites). The most common maximum palaeotemperatures reached in this event fall within the range 305–415 °C, although higher palaeotemperatures could be reached locally as a consequence of contact metamorphism. This event gave rise to subhorizontal cleavage that cuts the main Variscan folds. Coal rank data indicate an increase in maximum palaeotemperatures eastwards from the Esla nappe region to the Valsurbio region through the Guardo–Valderrueda basin.

New detailed mapping and related field studies, together with re-assessment of prior investigations, have revealed that three groups of faults, orientated broadly NE, N and NW, have been the primary controls on stratigraphical, structural and geomorphological evolution in the upper Firth of Clyde since their initiation by proto-Variscan stresses in Late Devonian time. Extended control has been achieved through repeated episodic reactivation, during which existing lines of fracture were rejuvenated and others of similar orientation initiated. Movements on two (if not all three) groups of faults persisted until middle Palaeogene time at least. The faults have been augmented by two sets of irregularly distributed, open, plunging folds, broadly N–S and E–W in their axial orientations. Some N–S folds may be attributed to oblique or strike-slip movement on reactivated caledonoid faults, others to intermittent transpression, probably in Namurian–Westphalian times, affecting mainly the northeastern Midland Valley but stretching beyond the massif of the Clyde Lava Plateau to register a weakened presence as far W as the upper Firth. The N–S folds and dextral strike-slip movements on some faults may be far-field expressions of the Uralian Orogeny, whereas earlier, sinistral displacements on NE faults and the development of small, later and less-significant E–W folds may be related to different phases of long-lived Variscan compression from the S.

Tectonothermal analysis of a mainly carbonate unit located in the external part of the Variscan orogen in NW Spain is dealt with using the conodont colour alteration index (CAI) and the study of textures of these microfossils. The Kübler index of the illite (KI) is used as a complementary method. The area is characterized by a great uniformity in the CAI values, which in most cases are <2, indicating diagenetic conditions. In spite of the low CAI values, textures show great variety and were mainly originated by diagenetic processes of apatite dissolution and precipitation. The conodonts underwent a long period of heating (probably from the Pennsylvanian to the Cenozoic) to low temperatures (<100°C) to reach the low CAI values measured. Assuming a normal geothermal gradient, these temperatures required an overburden <3 km that in part was due to burial and in part to tectonic superimposition. Minor local anomalies in the CAI values and some textural alterations, related to dissolution and precipitation of authigenic minerals, could be due to epithermal activity that gave rise to various ore deposits in the studied area mainly during Permian times.

A comparative study of three main igneous rock associations that plot in the K2O–SiO2 diagram shoshonite field: shoshonite series absarokites–shoshonites–banakites (henceforth referred to as shoshonites s.l.), vaugnerites, and potassic lamprophyres, reveals that similarities between the associations are superficial. Vaugnerites and lamprophyres are more magnesian, richer in large ion lithophile and high field strength elements and have higher light rare earth/heavy rare earth ratios than shoshonites. Furthermore, shoshonites have low radiogenic heat production, typical of subduction-related rocks, but most vaugnerites and some lamprophyres are highly radioactive. Relative to bulk-Earth, shoshonites have depleted, asthenospheric mantle-like Sr and Nd isotope signatures, whereas vaugnerites and potassic lamprophyres have enriched, crust or lithospheric mantle-like compositions. Though vaugnerites and some lamprophyres show evidence of crustal contamination, the contaminated magma was not originally shoshonitic. Their composition is consistent with derivation from a metasomatised upper mantle source enriched long before melting, thus precluding an active subduction setting. In conclusion, the term shoshonite, implying late-stage arc magmas, cannot be applied to a rock series simply because it plots into the K2O–SiO2 diagram shoshonite field. Shoshonites with a subduction-related source may, however, be identified by discriminant function analysis.

A summary is given of the lycophyte species as distributed in fifteen Euramerican coalfields during Asturian (Westphalian D) times. The datasets from the coalfields are analysed using unweighted pair group cluster analyses of Jaccard's Coefficients. Separate analyses were done on the full dataset (the full list of morphospecies) and on a more restricted dataset (only the morphospecies of vegetative organs). Three groupings of coalfields were resolved in the analyses. The two most clearly defined groupings represented the intramontane basin coalfields, and the coalfields of the lowland basins on the Variscan foreland where the lycophyte floras are well documented. The third grouping included those basins with less well-studied lycophyte floras, where the apparently low species diversity has undoubtedly affected the results. More work is needed on these poorly documented floras to produce a more rigorous phytogeographical analysis.

Transition from diagenesis to metamorphism has been characterized in the central part of the Picos de Europa unit (Cantabrian Zone) by conodont colour alteration index (CAI), complemented with Kübler index (KI) data. This unit essentially comprises Carboniferous limestone. The study leads us to deduce two successive tectonothermal events. The first event generated a pattern with palaeotemperatures increasing towards the Pisuerga–Carrión unit, located south of the Picos de Europa unit. The present pattern is the result of an original dip to the north of the isothermal surfaces and the subsequent rising of the Picos de Europa unit along the frontal ramp of a deep Alpine thrust. This episode is interpreted as related to an extensional tectonic regime that occurred close to the Carboniferous–Permian boundary. The second event, which gave rise to thermal anomalies in the pattern of the first episode, was the result of hydrothermal processes in which fluid movement was facilitated by a dense network of fractures in the area close to the eastern section of the studied region. These processes gave rise to numerous mineralizations and have been related to a Permian extensional tectonic regime.

The Bossòst dome is an E–W-trending elongated structural and metamorphic dome developed in Cambro-Ordovician metasedimentary rocks in the Variscan Axial Zone of the central Pyrenees. A steep fault separates a northern half-dome, cored by massif granite, from an E–W-trending doubly plunging antiform with granitic sills and dykes in the core to the south. The main foliation is a flat-lying S1/2 schistosity that grades into a steeper-dipping slaty cleavage at the dome margins. Three major deformational and two metamorphic phases can be differentiated. S1/2 schistosity is an axial planar cleavage to W-vergent recumbent folding that probably occurred in mid-Westphalian time. Peak regional metamorphism M1 is characterized by static growth of staurolite and garnet following thermal relaxation of the previously thickened crust. Strong non-coaxial deformation recording uniform top-to-the-SE extension during D2a is preserved in staurolite–garnet schists in a 1.5 km thick, shallowly SE-dipping zone in the southeastern dome. A 500 m thick contact aureole (M2) was imprinted on the regionally metamorphosed rocks following the intrusion the Bossòst granite during D2b. More coaxial deformation prevailed during synkinematic growth of M2 phases in the inner part of the contact aureole around the northern part of the dome, where it obliterated D2a fabrics. Progressive non-coaxial deformation continued in the southeastern antiform and is recorded by late-synkinematic growth of cordierite. Successive overprinting of the M1 staurolite–garnet assemblage by andalusite and cordierite of M2 is preserved in the southern part. The assemblage muscovite+cordierite+staurolite+biotite is considered metastable, given the low Mn and Zn contents of staurolite and cordierite, and interpreted as the result of prograde metamorphism during decompression. P–T conditions during M2 were approximately 3 kbar and 600 °C. Pervasive crenulations and mesoscopic to regional southerly verging folds are the result of D3 NNE–SSW compression post-dating ductile deformation and contact metamorphism. Polymetamorphic assemblages of the Bossòst dome preserve a regionally confined zone of ESE-directed extensional shearing within an overall N–S compressional setting. Exact timing of extensional shearing is not known, but can be constrained by recumbent folding during the mid-Westphalian and granitic intrusions, which confine it to Late Carboniferous time (c. 305 Ma). Crustal-scale flat-lying extensional shear zones with similar orientation and time frame are observed in the Hospitalêt massif of the eastern Axial Zone. This suggests that crustal extension, though probably restricted by regional strain partitioning over orthogneiss or intruding granitic bodies within an overall compressive setting, was not uncommon in Late Carboniferous time in the Axial Zone of the Pyrenees.

The Vila Pouca de Aguiar granite pluton, emplaced during the latest event of the Variscan orogeny of northern Portugal, is here subjected to a detailed study that combines magnetic fabric measurements and gravity modelling of its shape at depth. This laccolith, less than 1 km in thickness over ≈60% of its outcrop area, appears to be fed from its northern area, through narrow conduits, up to 5 km deep, belonging to a set of Y-shaped valleys that almost perfectly correspond to the local Régua–Verin fault-system identified in the geological maps. A normal petrographical zonation, already identified geologically, appears to be rather progressive, although a gradient in magnetic suceptibility magnitude in-between the two main magma types is evidenced. It is suggested that the first to be emplaced and the least evolved granite type (Vila Pouca de Aguiar Granite) upwelled from the local, NE-trending fault-zone, acting as a dyke, and formed a thin sill where NE-directed magma flow was dominant, at least close to the floor. The more evolved granite type (Pedras Salgadas Granite), located just above the main feeder zone, and deeply rooted at the intersection beween underlying faults, is at the centre of a remarkably regular concentric distribution of the foliation trajectories. They may reflect the late doming of the laccolith's northern part, coeval with a slight E-W extension of the inflating magma reservoir, as marked by the E-W-trending lineations. Along with ubiquitous magmatic to near-magmatic microstructures and particularly low anisotropy magnitudes, such patterns can be entirely explained by magma movement within its inflating reservoir. This composite laccolith, during emplacement of which no interference with the regional strain pattern can be recorded, is therefore considered as typical of post-tectonic emplacement.