In recent years, the significance of terahertz (THz) and (sub-)THz communications has grown substantially due to its promising trade-off between higher capacity compared to microwave-based communication and better resilience against weather dependent influences (e.g., fog and rain). While electronic and optoelectronic techniques have been extensively explored, each offering distinct advantages and limitations, they have predominantly been demonstrated and discussed as individual experiments, making performance comparison challenging. This paper addresses this gap by systematically benchmarking electronic and optoelectronic signal generation approaches under comparable conditions. Our experiments incorporate various receiver types, revealing that best performance is achieved by combining optoelectronic signal generation techniques at the transmitter in combination with an all-electric intradyne receiver. This results in a remarkable line rate of 200 Gbit/s over a distance of 52 m. To our knowledge, this represents the highest line rate achieved for technically relevant transmission distances for indoor access or outdoor small cell networks.

Path loss prediction (PLP) is an important feature of wireless communications because it allows a receiver to anticipate the signal strength that will be received from a transmitter at a given distance. The PLP is done by using machine learning models that take into account numerous aspects such as the frequency of the signal, the surroundings, and the type of antenna. Various machine learning methods are used to anticipate path loss propagation but it is difficult to predict path loss in unknown propagation conditions. In existing models rely on incomplete or outdated data, which can affect the accuracy and reliability of predictions and they do not take into account the effects of environmental factors, such as terrain, foliage, and weather conditions, on path loss. Furthermore, existing models are not robust enough to handle the real-world variability and uncertainty, leading to significant errors in predictions. To tackle this issue, a novel ultrahigh frequency (UHF) PLP based on K-nearest neighbors (KNNs) is developed for predicting and optimizing the path loss for UHF. In this proposed model, a KNN-based PLP has been used to predict the path loss in the UHF. This technique is used for high-accuracy PLP through KNN forecast route loss by determining the K-nearest data points to a particular test point based on a distance metric. Moreover, the existing models were not able to optimize path loss due to complex and large-scale machine learning models. Therefore, the stochastic gradient descent technique has been used to minimize the objective function, which is often a measure of the difference between the model’s predictions and the actual output that will fine-tune the parameters of the KNN model, by measuring the similarity between data points. This model is implemented using Python to make it a lot more convenient.

A low-profile slant ±45° polarized antenna for a 4G/5G base station with a dominant path wave propagation model (DPM) is reported in this paper. For dual-polarization and wide impedance bandwidth, the two dipole radiators are crisscrossed and a square metallic ring is integrated with the dipole arms and screwed with the four shorting vias. The antenna operates in Band 40/41/42/43 with strong isolation and low ECC (Envelop Correlation Coefficient). Fabricated antenna results show that the predicted wideband antenna has 13.38% bandwidth in 4G, which is Band 40/41, and 29.33% bandwidth in 5G sub-6 GHz Band 42/43. The antenna has a consistent radiation pattern, a 40 dB XPD (Cross Pol Discrimination), and a beam width of 69.5° ±1.5° in the entire frequency band. Three base station sites were explored to deploy the radiation pattern of a dual-polarized antenna in the 3D EM (Electromagnetic Analysis) tool. To evaluate signal quality, strength, radio network planning, and wave propagation analysis by analyzing antenna performance in real-time scenarios with 64 and 256 QAM (Quadrature Amplitude Modulation) techniques. For the proposed four-stream MIMO (Multiple-Input-Multiple-Output) antenna arrangement at deployed cell sites for 4G/5G base station applications, the maximum downlink and uplink data rates are 3.826/2.8 Mbps and 1044/800 Mbps respectively.

A superheterodyne transmission scheme is adopted and analyzed in a 300 GHz wireless point-to-point link. This was realized using two different intermediate frequency (IF) systems. The first uses fast digital synthesis which provides an IF signal centered around a carrier frequency of 10 GHz. The second involves the usage of commercially available mixers, which work as direct up- and down-converters, to generate the IF input and output. The radio frequency components are based on millimeterwave monolithic integrated circuits at a center frequency of 300 GHz. Transmission experiments over distances up to 10 m are carried out. Data rates of up to 60 Gbps using the first IF option and up to 24 Gbps using the second IF option are achieved. Modulation formats up to 32QAM are successfully transmitted. The linearity of this link and of its components is analyzed in detail. Two local oscillators (LOs), a photonics-based source and a commercially available electronic source are employed and compared. This work validates the concept of superheterodyne architecture for integration in a beyond-5G network, supplying important guidelines that have to be taken into account in the design steps of a future wireless system.

The implementation of advanced multi-level modulation schemes such as quadrature phase-shift keying (QPSK) in contrast to the conventional on–off keying is crucial to further boost the terahertz (THz) communications speed. Thereby, carrier phase noise reduction in the THz range is one of the key goals that need to be urgently achieved. In this paper, the photonic-based THz sources and the phase noise problem are briefly summarized. Then, a low phase-noise photonic source based on the stimulated Brillouin scattering (SBS) optical fiber cavity is first applied for a 300-GHz-band QPSK wireless communication link. The highest data rate at forward-error-correction limited condition was 15 Gbaud utilizing the SBS-based photonic source with a small transmit power of ~ −36 dBm. Its transmission characteristics are evaluated and compared with the conventional optical frequency comb generator (OFCG)-based source at 5 Gbaud. The proposed SBS-based photonic source has been proven to offer better performances than the OFCG-based source with respect to the phase noise, optical carrier to noise ratio, and bit error rate in communications.

A flexible and adaptive energy-efficient high-speed wireless hub is developed in polymer foil as a Hybrid System-in-Foil (HySiF) using Chip-Film Patch (CFP) technology. In this matter, the SiGe BiCMOS silicon chips (2.39 × 1.65 mm2) are thinned down to 45 μm and are embedded face-up inside a two-polymer CFP carrier. The active pads of the embedded silicon chips inside foil are extended to the surface of the foil to interconnect to the antenna on the foil. The integrated hybrid system has a signal transmission at 5–6 GHz frequency band. The overall thickness of the system is below 100 μm and its bendability is down to 4 mm radius of curvature. The designed and fabricated PA silicon chips operate at 50 mA with a 1.5 V supply voltage. Therefore, in addition to the high lateral thermal resistance of the thinned chip, self-heating loop inside polymer due to the low thermal conductivity of the embedding polymer raises the system temperature. Consequently, the thermal behavior and RF performance of the PA chip under different conditions are investigated. Moreover, the antenna with the required carrier frequency is simulated, fabricated, and measured on top of the polymer foil as a stand-alone system in the flexible CFP.

The pulse radiating characteristic of a wrapped bow-tie antenna (WBA) and wrapped resistively loaded bow-tie antenna (WRLBA) is presented for impulse radar applications in this paper. The numerical analysis of the WRLBA is performed by comparing that of the WBA. The wrapped antennas are realized on a flexible substrate. The antennas are fed by an impedance tapered balun, which has an overall transmission loss of −1.4 dB over the balun length. The characteristics of the resistive loading to the wrapped antenna, such as reflection coefficient, reflected pulse in the time domain, voltage standing wave ratio, and input impedance, are experimentally investigated and compared with simulated results. The fidelity factor of the radiated electric field on the boresight direction for the WBA and WRLBA is calculated as 0.82 and 0.96, respectively. The wireless communication ability is evaluated by the transmission coefficient, group delay, boresight gain, and received waveform. The calculated fidelity factor of the received waveform for the WBA and WRLBA is 0.79 and 0.85, respectively. The average and variations of the group delay of both wrapped antennas are observed to be around 2.5 ns and less than 1.5 ns, respectively.

The increasing demand for high-data rate communications in the connected world imposes various challenges in analog and radio frequency (RF) circuits. Although continued scaling in advanced processes offers faster devices, it is accompanied by increasing complexity in circuit design and layout strategy, resulting in diminishing benefits for analog/RF circuits. In order to enable new breakthroughs in speed, cost, and power efficiency, simplifying analog/RF circuits with the assistance of signal processing is becoming a clear trend. This paper provides an overview of this trend by reviewing the signal processing algorithms commonly deployed in wireless communications, data converters, and wired data links. The discussion covers design considerations, as well as algorithms used to compensate for circuit imperfections, so as to demonstrate the cross-discipline interactions between signal processing and analog/RF circuit design.

We consider a continuum percolation model consisting of two types of nodes, namely legitimate and eavesdropper nodes, distributed according to independent Poisson point processes in R2 of intensities λ and λE, respectively. A directed edge from one legitimate node A to another legitimate node B exists provided that the strength of the signal transmitted from node A that is received at node B is higher than that received at any eavesdropper node. The strength of the signal received at a node from a legitimate node depends not only on the distance between these nodes, but also on the location of the other legitimate nodes and an interference suppression parameter γ. The graph is said to percolate when there exists an infinitely connected component. We show that for any finite intensity λE of eavesdropper nodes, there exists a critical intensity λc < ∞ such that for all λ > λc the graph percolates for sufficiently small values of the interference parameter. Furthermore, for the subcritical regime, we show that there exists a λ0 such that for all λ < λ0 ≤ λc a suitable graph defined over eavesdropper node connections percolates that precludes percolation in the graphs formed by the legitimate nodes.

In this paper, material selection has been done for dielectric substrate material in microstrip patch antenna (MPA) for three distinct classes of wireless communication applications using Ashby's approach. This material selection procedure is based on the creation and evaluation of Ashby's chart of different material indices. These material indices in turn affect the device performance indices, which decide the best possible dielectric material to be used as substrate for MPAs. In this work, quality factor, relative permittivity, and temperature coefficient of resonant frequency are chosen as material indices of MPA's dielectric substrate to get relevant performances. Ashby's selection chart shows that 0.75MgAl2O4–0.25TiO2 material for millimeter waves applications, Ca[(L1/3Nb2/3)0.85Ti0.15]O3−δ for mobile base station applications, and (Ba0.95Ca0.05)O–Sm2O3–4.5TiO2 ceramic for mobile phone miniaturization applications are the promising materials that allows best overall performance in MPAs for wireless communication.

This paper presents an analysis of a generalized version of the coupon collector problem, in which the collector receives d coupons each run and chooses the least-collected coupon so far. In the asymptotic case when the number of coupons n goes to infinity, we show that, on average, (nlogn) / d + (n / d)(m − 1)log logn + O(mn) runs are needed to collect m sets of coupons. An exact algorithm is also developed for any finite case to compute the exact mean number of runs. Numerical examples are provided to verify our theoretical predictions.

We define and analyse a random coverage process of the d-dimensional Euclidean space which allows us to describe a continuous spectrum that ranges from the Boolean model to the Poisson–Voronoi tessellation to the Johnson–Mehl model. As for the Boolean model, the minimal stochastic setting consists of a Poisson point process on this Euclidean space and a sequence of real valued random variables considered as marks of this point process. In this coverage process, the cell attached to a point is defined as the region of the space where the effect of the mark of this point exceeds an affine function of the cumulative effect of all marks. This cumulative effect is defined as the shot-noise process associated with the marked point process. In addition to analysing and visualizing this spectrum, we study various basic properties of the coverage process such as the probability that a point or a pair of points be covered by a typical cell. We also determine the distribution of the number of cells which cover a given point, and show how to provide deterministic bounds on this number. Finally, we also analyse convergence properties of the coverage process using the framework of closed sets, and its differentiability properties using perturbation analysis. Our results require a pathwise continuity property for the shot-noise process for which we provide sufficient conditions. The model in question stems from wireless communications where several antennas share the same (or different but interfering) channel(s). In this case, the area where the signal of a given antenna can be received is the area where the signal to interference ratio is large enough. We describe this class of problems in detail in the paper. The results obtained allow us to compute quantities of practical interest within this setting: for instance the outage probability is obtained as the complement of the volume fraction; the law of the number of cells covering a point allows us to characterize handover strategies, and so on.