Well-crystallized laumontite has been found for the first time precipitating naturally at the earth's surface at temperatures of 89° to 43°C as a component of gray to white coatings and efflorescences on exterior surface and as precipitates on interior fractures of stones and blocks lining Hot Springs Creek immediately downstream from Sespe Hot Springs, Ventura County, California. X-ray powder diffraction, scanning electron microscope (SEM), and electron microprobe analyses show thenardite to be the dominant phase in the exterior coatings, in association with minor microcrystalline (<50 μm) laumontite and gypsum. Macrocrystalline (>1 mm) laumontite is the dominant phase in interior fracture coatings and is associated with quartz, potassium feldspar, and gypsum. Trace amounts of smectite(?), halite, a mercury sulfide, an iron sulfide, an iron-bearing mineral (possibly an oxide or carbonate), and a copper mineral are also present. Zeolites other than laumontite have not been seen, and carbonate minerals are either entirely or nearly absent. SEM textures indicate nonreactive intergrowths of laumontite, quartz, potassium feldspar, and gypsum. Unbroken laumontite crystals are generally euhedral or have skeletal growth characteristics and exhibit sharp, fresh, non-corroded faces, edges, and corners.

The water issuing from the hottest and largest spring is 89°C, has a pH of 7.74, 1200 mg/liter total dissolved solids, and contains Na+, Cl−, SO42-, and H4SiO4 as the dominant dissolved species. Computations indicate that the water is supersaturated with respect to laumontite, quartz, chlorite, and prehnite and is slightly undersaturated with respect to calcite and noncrystalline silica. Water-dominated water-rock interaction is indicated by isotopic analyses. The δO18 composition expectable on the basis of the −81‰ δD composition is −11.38‰ instead of the −9.5‰ actually found (all referred to SMOW). The water chemistry suggests that the subsurface water source may have a temperature of 125°–135°C. This temperature range, together with the regionally low geothermal gradient, implies that the source is probably 3550 to 3900 m beneath the springs in fractured and permeable Mesozoic and older plutonites and gneisses.

The discovery of laumontite crystallizing at atmospheric pressure and 43°C (or lower) provides important insight into the processes responsible for burial diagenetic laumontite and a valuable perspective on the zeolite metamorphic facies.

Zeolites and associated minerals occur in a tholeiitic basaltic pillow lava sequence that makes up part of the Eocene Siletz River Volcanics in the central Coast Range, Oregon. Regional zoning of zeolite assemblages is not apparent; the zeolites formed in joints, fractures, and interstices, although most occur in central cavities of basalt pillows. The zeolites and associated minerals identified, in general order of paragenetic sequence, are smectite, pyrite, calcite (small spheres), thomsonite, natrolite, analcime, scolecite, mesolite, stilbite, heulandite, apophyllite, chabazite, mordenite, calcite (scalenohedra and twinned rhombohedra), laumontite, and amethystine quartz. Common three-mineral assemblages are: natrolite-analcime-stilbite, stilbite-heulandite-chabazite, stilbite-apophyllite-chabazite, and natrolite-mesolite-laumontite.

Alteration of basaltic glass, which was initially abundant, appears to have been an important factor in formation of the zeolites. Isotopic data suggest that zeolitization occurred during a low-temperature (60°–70°C) submarine hydrothermal event, or by reactions of cold (∼10°C) meteoric water with basalt over a long time. The occurrence of different mineral assemblages in cavities of adjacent basalt pillows indicates that these minerals crystallized in closed systems that were isolated as fractures and joints were sealed by deposition of smectite and early zeolites. Although the total chemical composition of the mineral assemblages in cavities is similar, different mineral species formed because of the sensitivity of zeolite minerals to slight variations in physical and chemical conditions within individual cavities.

The oxygen isotopes of albite, quartz, and zeolites from the Hokonui Hills, New Zealand, constrain crystallization temperatures and the type of pore fluids present during diagenesis. A section of altered vitric tuffs in this region contains an extremely sharp reaction boundary between a heulandite-chlorite assemblage containing fresh detrital plagioclase and a laumontite-albite-quartz assemblage. A laumontite vein follows the local joint pattern and forms the reaction boundary, suggesting that laumontitization occurred as a result of fracturing and increased fluid flow during uplift. The albite (δ18O = +15.0)-quartz (δ18O = +19.9 to +20.5) geothermometer constrains the temperature of alteration between 145° and 170°C with a pore water δ18O of +1.8 to +3.5. The tuff was buried to an estimated maximum temperature of about 225°C, indicating that alteration occurred after maximum burial.

Framework oxygen was extracted from zeolites by reaction with ClF3 after the zeolites were thermally dehydrated in a vacuum. Laumontite was dehydrated at 300°C, and stilbite at 150°C. The precision of the method is typically about ±0.45‰. Fractionation curves for dehydrated zeolites are based on a general expression from the literature for feldspars, which depends only on the Si/Al ratio of the mineral. Measured δ18O values for laumontite in the groundmass of the altered tuff were +14.4‰. The laumontite-quartz pair constrains the temperature to between 139° and 162°C, in excellent agreement with the albite-quartz pair, and supporting the petrographic observation of co-crystallizing albite-laumontite.

Oxygen isotope values for fracture-filling laumontite in the vitric tuff, as well as those for groundmass and vein laumontite from other parts of the stratigraphic section, cluster around +14.5, suggesting that laumontite probably crystallized under similar conditions throughout much of the section. Oxygen isotope values for stilbite veins from various parts of the section indicate that this mineral crystallized at lower temperatures than the laumontite, for a given fluid isotopic composition, in agreement with the observed cross-cutting of laumontite by stilbite.

Laumontite is a common zeolite mineral indicative of low-grade metamorphism of lavas and volcaniclastic sediments. Stoichiometric laumontite (CaAl2Si4O12·4.5H2O) dehydrates in air at 298.15 K, 1 bar to leonhardite (CaAl2Si4O12·3.5H2O) via loss of water from the W1 crystallographic site. Consideration of reported X-ray diffraction and calorimetric data indicates that the standard molal volume and entropy for dehydration of laumontite to leonhardite + liquid water are ∼13 cc/mol and ∼8 cal/molK, respectively, at 298.15 K, 1 bar. Equilibrium between laumontite and leonhardite occurs at 70 to 80% relative humidity at 298.15 K, 1 bar, corresponding to a standard molal Gibbs energy and enthalpy of reaction of ∼170±40 and ∼2630±100 cal/mol, respectively. Calculated univariant equilibrium for this reaction is nearly linear from 46±3°C at 1 bar to 235±3°C at 5000 bar. Comparison of geological observations with these results suggests that laumontite forms as ‘leonhardite’ during metamorphism and diagenesis. Consideration of ‘leonhardite’, instead of laumontite, in low-grade metamorphic phase relations facilitates prediction of the relative stabilities of zeolites in natural and geologic systems, where calculated entropies of reaction incorrectly predict that assemblages bearing fully hydrated laumontite are stable at lower temperatures than the zeolites heulandite and stilbite.

The Tertiary volcano-sedimentary sequence of the Feres basin (Thrace, NE Greece), includes lavas of andesitic–rhyolitic composition as well as volcaniclastic rocks, pyroclastic flows and pyroclastic fall deposits principally of dacitic–rhyodacitic composition. The pyroclastic flow deposits frequently show intense devitrification, vapour-phase crystallization and evidence of fumarolic activity, which involves deposition of scapolite in pore spaces. The Feres basin can be subdivided on the basis of mineral alteration assemblages: (1) the Pefka region; characterized by intense hydrothermal alteration of the volcanic rocks and mineral zoning(silicic, argillic, sericitic and propylitic zones) with polymetallic mineralization, and (2) the remainder of the basin; where the volcaniclastic rocks are characterized by the alteration of volcanic glass to zeolites (clinoptilolite, heulandite, mordenite, analcime), clay minerals (smectite, illite, celadonite, chlorite), SiO2 polymorphs (cristobalite, opal-CT, quartz), K-feldspar and calcite. Laumontite is also present as an alteration product of plagioclase, with stilbite sporadically occurringin veinlets. Locally, rhyolites are also altered to zeolites (clinoptilolite and/or mordenite). The zeolitization process has occurred rapidly with the depositional environment, temperature, rate of cooling(of the volcanic rocks), nature and temperature of the mineral-forming fluids and composition of the parent material controllingthe formation of zeolites.

Hydration reactions are known to affect rock or aggregate stability in construction; laumontite is not usually considered to be a ‘problem-mineral’ though drill cores from the very low-grade metamorphic altered andesites and volcanoclastic rocks from Central Chile showed detachments of shotcrete in a tunnel exposed to periodic water flow, with expandable clay phases presumed to be responsible for the observed failure. Abundant laumontite detected in the cores may also be responsible for the detachment, however, resulting from the structural expansion and contraction in response to hydration and drying. Clay reactivity in construction projects is often tested on site by 30 days of ethylene glycol exposure, but adequate monitoring options for laumontite are not deployed. Options for laumontite characterization involving a combination of water immersion and slaking and modified oedometer-based expansibility tests were used here to observe the response to laumontite expansion pressure. All tests were formulated considering minimal implementation efforts for building sites or the easy availability of analytical and testing facilities.

Laumontite was identified by optical microscopy, semiquantitative X-ray diffraction, and automated mineralogical analysis. A combination of the latter two methods provided reliable information about the presence of sub-microscopic laumontite and a visual impression of the textural arrangement of the zeolite in the rock.

A slaking test based on four cycles of immersion followed by drying and final application of weight (simulated overburden) is best suited to indirect detection and for demonstrating rock reactivity due to the presence of laumontite. Rocks with laumontite show expansion when crushed, recompacted and fitted into an oedometer, but mineralogical information is required for adequate interpretation of the results.