The supply of Corumbataí Formation rocks, which occur widely in the State of São Paulo, Brazil, and are used by Santa Gertrudes Ceramic Cluster, is dwindling and prospecting for new deposits is essential. The current study aimed to map and characterize new reserves of ceramic raw materials which would guarantee mineral and economic sustainability of the important concentration of ceramic-processing capability in that area, and thereby contribute to improving and diversifying the range of products manufactured and to promoting a greater presence in the international market. To achieve the proposed objectives, 16 profiles were sampled and the samples were submitted to granulometric analysis by laser diffraction, and the major elements by inductively coupled plasma-mass spectrometry, and the mineralogical compositions of clay samples were determined by X-ray diffraction and ceramic properties. Six lithofacies were identified and grouped into two facies associations: a lower shoreface association comprising massive siltstone (Sm) and laminated siltstone (Sl); lithofacies, and an upper shoreface association comprising heterolithic sandstone (Sh), lenticular sandstone (Sle), intercalated sandstone/siltstone (Si), and altered siltstone (Sa) lithofacies. The lithofacies of the lower shoreface association were more clayey, flux with a significant presence of illite and microcline, and a more uniform granulometry distribution, which made its classification possible, technologically, as stoneware and semi stoneware. The main application of this material is in the production of coatings through the wet milling process. The lithofacies of the upper shoreface association was sandier, had a refractory presence with kaolinite and montmorillonite, and had a less uniform granulometric distribution; technologically, it can be characterized as porous and semi-porous. The main application of this material is in the production of coatings by the dry milling process. The results obtained by facies analysis combined with the geochemical and ceramic properties of the Corumbataí Formation rocks revealed both vertical and lateral variations of the lithofacies, which influence their properties, behavior, and application as ceramic raw materials.

This study presents the 3-D geometry of the Oligocene Rupel Clay Member and a review of its depositional environment based on new and published data. The Rupel Clay Member (RCM) is a clay layer in the Dutch subsurface which is informally known as the Boom Clay. New depth and thickness maps show that the member is present in nearly the whole subsurface of the onshore Netherlands to a depth of about 1500 m. The thickness of the member is variable but rarely exceeds 125 m. We identified three subunits: RCM-U, with a thickness of 15–40 m; RCM-M, with a thickness of 40–90 m; and RCM-L with a thickness of 25–50 m. The Rupel Clay Member is not a homogeneous clay; both vertical and lateral grain-size trends are present. These trends match with general palaeogeographic trends which foresee near-shore facies in the south and southeast of the onshore Netherlands and a more distal setting when moving northward. The three subunits are correlated with global climatic and regional tectonic events, which have mainly affected marginal facies. Faults are known to cut through the clay layer, but have not been mapped. A mismatch of lithostratigraphic nomenclature between the Netherlands and neighbouring countries is present. Part of the solution for this mismatch lies in the proper interpretation of well data in the Netherlands, both on- and offshore.

The Pliocene and Quaternary unconsolidated sediments of the Upper Rhine Graben (URG) were petrographically analysed in numerous high quality drill cores. The heavy mineral composition of the Graben sediments was compared to those from the Graben margins. In addition, the sedimentary lithofacies were investigated. The chronological classification of the sedimentary successions was established by the interpretation of sporadic palaeontological and palaeomagnetic data.

Within the Pliocene sediments, two distinguishable heavy mineral assemblages indicate different source areas of the Graben fill. At first, a heavy mineral assemblage of stable minerals (turmaline, zircon and anatase) indicates a contribution of debris supplied from Buntsandstein areas at the Graben margins. Secondly, a mixed association of stable minerals in combination with unstable (garnet, hornblende, less epidote) and distinct rare minerals (e.g. monazite, xenotime) can be traced back to debris derived from the crystalline rocks of the southern Graben margins (Black Forest, Vosges). The distribution of sediments with this mixed heavy mineral assemblage proves the fluvial sediment transport from south to north and therefore the course of the Pliocene proto-Rhine along the Graben.

The correlation between the Quaternary sediment successions in the south and the north of the Graben is problematic due to their variable thicknesses as well as their changing lithofacies.

In the southern URG, the Quaternary strata could be subdivided into the older Breisgau Formation and the younger Neuenburg Formation based on characteristic lithofacies. Within this succession, the lower part of the Breisgau Formation (lower Breisgau beds) can be distinguished by noticeable lower contents of hornblende, which probably reflects the effects of weathering and solution of these unstable minerals due to repeated discontinuities during the sediment accumulation. The sediments of the upper part of the Breisgau Formation (upper Breisgau beds) and of the Neuenburg Formation contain a heavy mineral assemblage of garnet, epidote and hornblende, which is typical for Rhine deposits with Alpine contribution. This probably unaffected composition indicates a more unvaried and rapid accumulation of predominantly Alpine debris. In the northern URG, the Quaternary strata are subdivided into three aquifers and intercalated fine-grained horizons. Here, the Quaternary sediments can be petrographically classified into Rhine deposits (garnet, epidote and hornblende) and local accumulations contributed from the Graben margins (turmaline, zircon and anatase) without contemporaneous influence of the Rhine. The analytical results obtained from several drill cores in the northern URG provide evidence for the spatial and temporal variability of the course of the Rhine during the Quaternary.

Systematic lithofacies, palaeocurrent, palaeomorphological and palaeohydrological analyses have provided detailed information about a hitherto unstudied river system of the Siwalik foreland basin of the Himalaya. Three distinct lithofacies associations, each representing a specific depositional setting, have been identified and named as ‘Facies Association A’, ‘Facies Association B’ and ‘Facies Association C’. The ‘Facies Association A’ comprises pebbly sandstone, cross-bedded sandstone, ripple-laminated sandy siltstone and bioturbated mudstone lithofacies and represents deposits of a braided channel. The ‘Facies Association B’ comprises cross-bedded sandstone, bioturbated mudstone, fine sandstone–mudstone alternation and lensoid to prismatic sandstone lithofacies and represents deposits of a channel, natural levee, crevasse-splay and flood plain of a meandering stream. The ‘Facies Association C’ comprises mottled siltstone–mudstone heterolith and fine sandstone lithofacies and represents deposits of the upland interfluve region. The braided stream had a maximum depth of 4.15 m, maximum width of 305 m and maximum discharge of 7045 cumec, whereas the meandering stream had a sinuosity of 1.26, maximum depth of 3.71 m, maximum width of 180 m and maximum discharge of 4070 cumec. The area had a regional radial outward flow pattern, but dominantly towards the SSW. However, the braided river had a bimodal flow pattern due to an active basement-high-induced bend along its course. A comparison of the sediment characters and morphological and hydrological parameters of these streams with those of the modern rivers of the Ganga (Gangetic) basin has enabled us to infer that this river system was located in the medial-distal megafan-interfan setting of the basin.

The Geological Survey of the Netherlands aims at building a 3D geological voxel model of the upper 30 m of the subsurface of the Netherlands in order to provide a sound basis for subsurface related questions on, amongst others, groundwater extraction and management, land subsidence studies, aggregate resources and infrastructural issues. The Province of Zeeland (SW Netherlands, covering an area of approximately 70 by 75 km) was chosen as the starting point for this model due to an excellent dataset of 23,000 stratigraphically interpreted borehole descriptions.

The modelling procedure involved a number of steps. The first step is a geological schematisation of the borehole descriptions into units that have uniform sediment characteristics, using lithostratigraphical, lithofacies and lithological criteria. During the second modelling step, 2D bounding surfaces are constructed. These surfaces represent the top and base of the lithostratigraphical units and are used to place each voxel (100 by 100 by 0.5 metres) in the model within the correct lithostratigraphical unit. The lithological units in the borehole descriptions are used to perform a final 3D stochastic interpolation of lithofacies, lithology (clay, sand, peat) and if applicable, sand grain-size class within each lithostratigraphical unit. After this step, a three-dimensional geological model is obtained. The use of stochastic techniques such as Sequential Gaussian Simulation and Sequential Indicator Simulation, allowed us to compute probabilities for lithostratigraphy, lithofacies and lithology for each voxel, providing a measure of model uncertainty.

The procedures described above resulted in the first fully 3D regional-scale lithofacies model of the shallow subsurface in the Netherlands. The model provides important new insights on spatial connectivity of sediment units of, for example, sandy Holocene tidal channel systems. Our results represent a major step forward towards a fully 3D voxel model of the Netherlands.