This study focuses on characterizing a discontinuity within the Seán stalagmite (4.75–7.75 cm) by means of two nondestructive techniques: (1) high-resolution micro-computed tomography (micro-CT) and (2) X-ray fluorescence (XRF) core scanning (XRFCS). Micro-CT was used to study the stalagmite density, and XRFCS was applied to obtain the qualitative elemental composition and colour measurements. The new data obtained from nondestructive techniques have been combined with previously published geochemical data and fabric determinations from the same stalagmite found in Sa Balma des Quartó cave in Mallorca. The two methodologies applied in the present study have improved the characterization of the distinctive horizon. The micro-CT images identified the layer as a minor event due the high air content. The distinctive horizon is characterized by a high Ti-content, indicating the arrival of terrigenous particles. Based on those observations, together with the fact that the micrite layer appears filling the gaps between the older columnar fabric, we argue that the micrite layer may represent a major flooding event inside the cave after the year 1616 ± 23 CE and before the year 1623 ± 28 CE, which can be related to an extreme rainfall event. This hypothesis is further supported by the observed cave flooding during the autumn of 2018.

For materials characterization, obtaining insight through 3D imaging has been extremely helpful in improving our understanding of complex systems. X-ray computed tomography (CT) has proven to be an extremely useful technique in this field, allowing for non-destructive interrogation of samples of all types across many length scales. In this article we look at how micro-CT is moving from static 3D imaging into the realm of 4D data collection through dynamic CT, where CT data are collected on samples undergoing change in an uninterrupted matter.

The Royal Tyrrell Museum in Alberta, Canada is focused on reconstructing the communities that existed at the end of the Cretaceous. This challenge is made more difficult because for many of the taxa present, few complete specimens are preserved. In most smaller animals, all that remains preserved are isolated elements such as jaws. Teleost fish are of particular interest because they are dominant in today's aquatic communities. They are thought to have diversified after the Cretacious-Paleogene (K-Pg) mass extinction event, but many questions about early freshwater members of this group remain. Even the number of species present remains a mystery. Through an ambitious SR-μCT study we are non-destructively digitally dissecting both isolated elements and articulated skeletons that remain embedded in their rock matrix. Through comparison studies we are identifying features to aid in their identification while preserving the original fossils in an unaltered state for future studies.

There is a significant interest in developing the corrosion-resistant magnesium (Mg) alloy as a degradable biomaterial. In this work, the magnesium–zirconium (Zr = 1 wt%)–strontium (Sr = 2 wt%)–cerium (Ce = 0, 0.5 wt%) alloy was developed using the casting process. Effects of Ce addition on alloy microstructure, corrosion behavior, and biocompatibility were systematically investigated. Detailed microstructural analysis indicated that 0.5 wt% Ce addition refined the second phase (Mg17Sr2) in the Mg–2Sr–1Zr alloy. Furthermore, phase analysis of corrosion product showed the formation of stable CeO2 oxide layer on the corroded surface of the Mg alloy. Both the precipitate refinement and stable CeO2 layer formation significantly contributed toward enhanced corrosion resistance of the Mg–Sr–Zr–Ce alloy, as determined by both electrochemical and immersion corrosion in phosphate-buffered saline. Significantly higher osteoblast-like cell (MG-63) proliferation was observed in Ce-containing Mg alloy at both day 1 and day 3. Overall, the results showed that Ce addition could modulate degradation behavior and biocompatibility of the ternary Mg alloy.

Optimal placental function is critical for fetal development, and therefore a crucial consideration for understanding the developmental origins of health and disease (DOHaD). The structure of the fetal side of the placental vasculature is an important determinant of fetal growth and cardiovascular development. There are several imaging modalities for assessing feto-placental structure including stereology, electron microscopy, confocal microscopy, micro-computed tomography, light-sheet microscopy, ultrasonography and magnetic resonance imaging. In this review, we present current methodologies for imaging feto-placental vasculature morphology ex vivo and in vivo in human and experimental models, their advantages and limitations and how these provide insight into placental function and fetal outcomes. These imaging approaches add important perspective to our understanding of placental biology and have potential to be new tools to elucidate a deeper understanding of DOHaD.

Some interesting properties such as superelasticity, shape memory effect, kink resistance, good biocompatibility, biomechanical properties, and corrosion resistance made nitinol a popular biomaterial as stent and orthopedic implants. But surface modification is needed to control nickel leaching from its surface, making safe for human body. The aim of this study was to modify the nitinol surface by the silanization technique and electrophoretically deposited hydroxyapatite coating, and to conduct a detailed in vitro and in vivo investigation. Detailed in vitro investigation involved MTT assay with the human osteoblastic cells (MG63 cell) over a period of 5 days and confocal image study. In case of in vivo study, histological study, fluorochrome labeling study, and Micro-Ct study were conducted. The overall in vitro and in vivo results indicate that silanized nitinol samples are showing slightly better level of performance, but both the surface-modified samples are suitable as the potential bio-implant for orthopedic purpose.

In this study, we generate novel insights regarding bodily ornaments from indigenous societies of late precolonial Greater Antilles. Previous research has highlighted the sociopolitical role of valuable, exotic, and figurative ornaments, yet there are many gaps in our current understanding of these artifacts. Here, we focus on ornaments from five recently excavated sites in the Dominican Republic (AD 800–1600). We used microwear analysis to investigate each ornament and assess its production sequence and use life. These data permitted the definition of morpho-technical groups, which we then compared to depositional contexts and the regional availability of raw materials. We demonstrate that (1) there was small-scale production of ornaments at the sites, (2) the most recurrent morpho-technical groups were likely imported from production centers, and (3) ornaments of the same group could lead different use lives and be deposited through varied processes. We conclude that bodily ornaments had highly diverse biographies involving local and regional interaction networks.

The effects of silicon incorporation on the in vitro and in vivo properties of magnesium phosphate (MgP) bioceramics were studied. Samples were prepared by conventional solid state synthesis method. Scanning electron microscopy and micro-computed tomography (µ-CT) analysis showed that Si doping reduces degradability of MgP. In vitro studies have shown that MG63 cells can attach and proliferate on MgP samples. Live/dead imaging showed that MgP–0.5Si sample had highest cell proliferation, which was also quantitatively confirmed by alamar blue assay. In vivo biocompatibility of MgP ceramics was assessed after implantation in rabbit model. Detailed µ-CT analysis showed new bone tissue formation around the implant after 30 and 90 days. MgP–0.5Si ceramics had 84% bone regeneration compared with 56% for pure MgP ceramics, as confirmed by oxytetracycline labeling. Our finding suggests that Si doping can alter physicochemical properties of MgP ceramics and promotes osseointegration, which can be a useful choice for bone tissue engineering.

This work focuses on the application of nanoindentation measurements and the finite element method for analyzing the mechanical properties of the rostrum of the outstanding driller Cyrtotrachelus buqueti Guer. Nanoindentation tests were carried out to measure the Young's modulus and hardness of the rostrum, with the results for the “dry” samples being 13.886 ± 0.75 and 0.368 ± 0.0445 GPa, respectively. The values for the “fresh” samples showed no clear difference from those of the “dry” ones. Moreover, field observation was conducted to determine the motion behaviors of the rostrum on the weevil. Micro-computed tomography technology was employed to obtain structural information about the rostrum, using 9 µm slices. A real three-dimensional model of the rostrum was created using the MIMICS application. Finally, the mechanical properties of the rostrum were determined by finite element analysis. It was concluded that the rostrum provides an ideal biological template for the design of biocomposite materials and lightweight tube-shaped structures. The properties determined in this study can potentially be applied in different fields, such as in the design of automotive hybrid transmission shafts, helicopter tail drive shafts, robotic arms, and other sandwich structures in aerospace engineering.

Data-constrained modeling is a method that enables three-dimensional distribution of mineral phases and porosity in a sample to be modeled based on micro-computed tomography scans acquired at different X-ray energies. Here we describe an alternative method for measuring porosity, synchrotron K-edge subtraction using xenon gas as a contrast agent. Results from both methods applied to the same Darai limestone sample are compared. Reasonable agreement between the two methods and with other porosity measurements is obtained. The possibility of a combination of data-constrained modeling and K-edge subtraction methods for more accurate sample characterization is discussed.