The rheological properties of three Na-activated, trioctahedral Mg-bentonites (hectorite clay from the CMS Source Clay Project repository, saponite clay from Spain and stevensite clay from Rhassoul, Morocco) and a sepiolite clay from Greece were examined after dynamic ageing at temperatures up to 230°C. The 5% w/v suspensions were prepared by dispersing the clay mineral samples in distilled water. The suspensions underwent dynamic, thermal ageing for 16 h before determination of the viscosity, filtration loss, filter cake thickness and pH and the concentration of dissolved Na+ and Mg2+. Thermal ageing contributed to the dispersion of clay particles, with a direct effect on plastic and apparent viscosity, introducing pseudoplastic behaviour. With the exception of the stevensite clay at 230°C that displayed limited dissolution at 230°C and partial conversion to kerolite, the clays were stable at high temperatures. The Na-activation of all clays except for stevensite was not adversely affected by thermal ageing. Thermal ageing of stevensite at 230°C facilitated Na exchange and yielded suspension with high viscosity and low filtrate loss. Only the suspensions of hectorite and those of stevensite aged at 230°C met with American Petroleum Institute specifications. The thermal behaviour and rheological properties of the clays might be interpreted according to the intrinsic properties of the clay minerals, such as layer charge and charge distribution.

The increasing demands for oil and gas and associated difficult drilling operations require oil-based drilling fluids that possess excellent rheological properties and thermal stability. The objective of the present work was to investigate the rheological properties and thermal stability of organo-montmorillonite (OMnt) modified with various surfactants and under various loading levels in oil-based drilling fluids, as revealed by the interaction between organic surfactants and montmorillonite. The influence of the structural arrangement of surfactants on the thermal stability of organo-montmorillonite (OMnt) in oil-based drilling fluids was also addressed. OMnt samples were prepared in aqueous solution using surfactants possessing either a single long alkyl chain two long alkyl chains. OMnt samples were characterized by X-ray diffraction, high-resolution transmission electron microscopy, thermal analysis, and X-ray photoelectron spectroscopy. Organic surfactants interacted with montmorillonite by electrostatic attraction. The arrangements of organic surfactants depended on the number of long alkyl chains and the geometrical shape of organic cations. In addition to the thermal stability of surfactants, intermolecular interaction also improved the thermal stability of OMnt/oil fluids. A tight paraffin-type bilayer arrangement contributed to the excellent rheological properties and thermal stability of OMnt/oil fluids. The deterioration of rheological properties of OMnt/oil fluids at temperatures up to 200°C was due mainly to the release of interlayer surfactants into the oil.

Eggnog, a dairy-based beverage, comprises both milk and egg proteins. We aimed at optimizing the eggnog formulation using Box–Behnken design of response surface methodology. The combined effects of milk (60–75), cream (25–35) and eggnog base (6–8, all three as g 100/ml) were investigated on heat coagulation time, viscosity and thermal gelation temperature. ANOVA indicated that experimental data were well explained by a quadratic model with high check values (R2 > 0.94) and non-significant lack of fit tests. Based on the responses, an optimized formulation of eggnog with 60.0 milk, 25.0 cream and 6.50 eggnog base (as g 100/ml), could be considered best for manufacturing eggnog with desired attributes. This optimized formulation was characterized for physico-chemical, microbial and sensory attributes and the results indicated significantly higher fat and protein content than control formulation, but lesser lactose and total sugar content. Significantly higher viscosity, heat stability and lower thermal gelation temperature were also observed for the optimized formulation. Coliform, yeast and mold, E. coli and Salmonella counts were not detected in any sample but a significantly lower total plate count was observed for the optimized formulation.

Introduction. Pitaya peel has been applied as a functional ingredient for food due to the presence of betacyanins. However its polysaccharides can also contribute as a texture agent for food. The aim of this work was to evaluate the chemical characteristics and rheological behavior of the pitaya peel. Materials and methods. The samples were analyzed with regard to moisture and mineral content, protein, lipids, sugar, fiber, vitamin C, titratable acidity, soluble solids content and pH. Rheological measurements were performed on rheometer through flow curve, stress sweep, frequency sweep and the variation of temperature. Results and discussion. The results showed that pitaya peel is rich in insoluble fibers and exhibits non-Newtonian behavior, characteristic of a strong gel with a predominance of solid character. Furthermore, samples showed thermal resistance at the conditions of frequency, tension and temperature analyzed. Conclusion. Considering our results, in addition to use as a natural colorant in food, pitaya peel can also contribute to the nutritional value and texture of the products.

Introduction. Because of the long transportation times and storage durationsthat are often experienced, it is important to understand how pomelo properties changeover time; that will be indicative of how long samples can be stored before they dropbelow acceptable quality limits. As no information is available regarding storage ofpomelo fruit in the literature, the goal of our work was to study the change in pomelophysicochemical and textural properties following storage over a period of approximately4 months. Materials and methods. The changes in physical, chemical andtextural properties of commercial pomelo fruit were extensively evaluated over the courseof a 4-month storage period. The correlation among physical, color, chemical and texturalproperties were also assessed. Results. Color properties(L*, a*, b*) changed significantly withstorage; however, they did not change much during the initial 45 days of storage. Thechange in soluble solids content (SSC), acidity (A) and the [(SSC) / (A)] ratio suggestedthat pomelo fruit should not be stored for more than 75 days. Crucially, our studydemonstrates that the a* parameter (greenness, R = –0.556) correlatesbest with the chemical property the [(SSC) / (A)] ratio, which is a recognized measurementof the consumer acceptability of citrus fruit. This means that measuringa* is a non-destructive way of monitoring the taste characteristics ofpomelos in storage. This property also correlated well with the average firmness of thefruit and with the flesh texture. Conclusion. This fundamental information onthe pomelo fruit could prove useful in the physical handling and processing of the fruitby breeders and postharvest technologists as well as distributors, market agents,importers and exporters.

In this study, the physicochemical properties of a low-fat dried yogurt paste (kashk) were determined, and the effects of different concentrations (0, 0·1, 0·3 and 0·5% w/w) of gum tragacanth exudates from Astragalus gossypinus on the stability and texture of the samples were investigated by measuring amount of syneresis, turbidity, particle size distribution (PSD), flow behaviour and viscoelastic properties. The flow behaviour index was not very sensitive to the concentration of gum, while a remarkable concentration dependency of the power-law consistency coefficient and Herschel–Bulkley yield stress was observed. The initial increase in the gum concentration at 0·1 and 0·3% levels led to a higher degree of syneresis, which was related to the depletion flocculation mechanism. However, the reduced amount of syneresis in samples containing 0·5% gum tragacanth was attributed to the significant increase in viscosity of the continuous phase, which is also accompanied by trapping of the aggregated casein particles. The presence of 3% salt in the samples may have led to the neutralization of charges on the surface of gum tragacanth; consequently, the non-adsorbing behaviour of high-ionic-strength polysaccharides inhibited the formation of electrostatic protein–polysaccharide complexes. Furthermore, maximum values of polydispersity, syneresis and tan δ at high frequencies were found in samples containing 0·1% gum tragacanth.

The effect of freezing on the properties of a raw ewes’-milk semi-soft cheese (Serpa cheese) was studied using small amplitude oscillatory (SAOS) and texture measurements, colour and chemical parameters. The freezing was introduced at three different stages of the ripening process (28, 35 and 42 days), and the cheeses were maintained frozen for 12 months. Cheeses were submitted to a slow or fast freezing method, and to different storage temperatures: −10 and −20°C (three replicates for each set conditions). Chemical data showed that only the proteolysis indicators exhibited differences between frozen and non-frozen samples; frozen samples showed higher values of NPN than the non-frozen samples, indicating that the freezing process did not prevent the secondary proteolysis of cheese. Frozen samples showed a significantly (P<0·05) stronger structure than the non-frozen, as indicated by hardness. However, the differences between the frozen and non-frozen samples were not significantly for storage modulus (G′1Hz) and loss tangent (tan δ1Hz) (P>0·05). Freezing affected mainly colour parameters: frozen samples were more luminous, and more yellow-green. The results allowed us to conclude that the damages caused by freezing to cheese properties could be minimized if this type of storage is introduced at the end of ripening (42 d) using a freezing temperature of −20°C.

Forty seven exopolysaccharide (EPS) producing mesophilic lactic acid bacteria have been isolated from Dahi and raw milk and selected cultures were evaluated for their influence on rheological and sensory properties of fat-free Dahi. Two isolates namely B-6 and KT-24 that showed promising technological attributes were identified as Lc. lactis subsp. lactis strains. B-6 produced 184±2 mg/l EPS in deproteinized whey medium compared with 193±1 mg/l by KT-24. EPS produced by B-6 was a heteropolysaccharide (consisting of glucose and mannose, 1:7·4) with molecular weight of 3·0×104 Da whereas KT-24 EPS was a homopolysaccharide (rhamnose) having molecular weight of 4·5×104 Da. Both EPS producing cultures showed significant changes in rheological and sensory properties of fat-free Dahi. Dahi prepared by these cultures was more viscous, adhesive, sticky, showed lower susceptibility to whey separation, and received higher sensory scores than Dahi prepared with non-EPS producing culture.

The aim of this research was to study the effects of dairy maturation on the physico-chemical characteristics and technological properties of milk used for Parmigiano-Reggiano cheese manufacture. Three different operating conditions (CF1, CF2 and CF3) were considered. Full cream milk from the evening milking was stored on the farm and delivered to the cheese factory in churns (CF1) or in thermoregulated tanks at a temperature not lower than 18°C (CF2 and CF3). The natural creaming (10–12 h overnight) was performed in a traditional large flat vat containing 10–12 hl (CF1 and CF2) or in thermoregulated large flat vats containing 60 hl at about 15°C (CF3). Twenty-four, 24 and 22 maturation trials were performed in CF1, CF2, and CF3, respectively, during 2 consecutive years. A significant increase (P⩽0·05) in pH during the maturation of milk was observed in CF1 and CF2. The increase of pH was higher (P⩽0·05) in CF1 than CF2 and CF3. The values of titratable acidity were higher (P⩽0·05) in partially skimmed evening (PS) milk than in full cream (FC) milk in each operative condition. The increase observed in CF2 was higher than those reported in CF1 and CF3. Compared with FC milk, PS milk showed lower values (P⩽0·05) of casein and casein number and higher contents (P⩽0·05) of whey proteins and, particularly, proteose-peptone. The increase of proteose-peptone – per 100 g SNF or 100 g casein – was significantly higher (P⩽0·05) in CF1 than in CF2 and, in particular, than in CF3. A higher increase (P⩽0·05) of resistance to compression was observed in CF1 with respect to CF3. CF2 variation was not different with respect to either CF1 or CF3. Variation of the difference between PS and FC milks (PS-FC) in pH, TBC and fat were clearly lower in CF3 than CF1. This means that the control of milk temperature throughout the whole maturation phase offers a greater control of both microbial development and extent of creaming.

An attempt at classifying the influence of different characteristics of milk and cheesemaking on the rheological properties of Abondance cheese is presented. Abondance is a traditional farmhouse French hard cheese with protected denomination of origin (PDO). Thirty-nine cheeses made from unpasteurized cows' milk were sampled. Spline partial least squares regression was used to relate milk properties and cheesemaking practices to rheological properties of the six-month-old cheeses. These properties were the deformability modulus and the strain and stress at fracture measured by compression. Milk properties and technological practices had overall the same degree of relationship with the rheological properties investigated: plasminogen-derived activity in milk and mineral-protein equilibrium, on the one hand, and brining and resting, on the other hand. However, acidification kinetics and 1-d pH, which result from both milk properties and technological practices, showed the strongest relationships with rheological characteristics. Factors that were most appropriate for modelling Abondance rheological properties are discussed.

The aim of this research was to study the effects of the CSN1AG allele on the main rennet coagulation properties of milk. The study was carried out on individual milk samples with low αs1-casein obtained from 19 Italian Brown cows heterozygous for the CSN1AG allele (seventeen CSN1A BG and two CSN1A CG) from four herds in the province of Parma (Italy). Control cows (sixteen CSN1A BB and three CSN1A BC) giving milk with normal αs1-casein levels were chosen from within the same herds in order to establish pairs of cows with identical environment and management conditions, and comparable lactation stages and numbers. Individual milk samples from single pairs of cows with somatic cell counts and lactose and chloride levels within the normal ranges were collected and analysed in parallel. Rennet coagulation properties of milk were analysed using Formagraph and Gel Tester. Milk from low αs1-casein cows was characterized by lower casein content, lower titratable acidity and a higher proportion of κ-casein in total casein. The clotting time of this milk was ∼ 23% lower than that obtained with milk from normal αs1-casein cows. Rennet curd from low αs1-casein milk was obtained more rapidly and had a higher final firmness: curd-firming time was ∼ 35% lower and curd firmness measured 30 min after rennet addition was ∼ 27 % higher compared with that for normal αs1-casein milk. In addition, curd from low αs1-casein milk had a higher resistance to compression. These results suggest that, although a role for the CSN2 locus cannot be definitely excluded, the CSN1AG allele can considerably affect the main rennet coagulation properties of milk.