Hostname: page-component-78c5997874-4rdpn Total loading time: 0 Render date: 2024-11-13T02:14:45.853Z Has data issue: false hasContentIssue false
  • English
  • Français

Tem Investigation of Titanium Silicide Thin Films

Published online by Cambridge University Press:  10 February 2011

A. F. Myers ,
E. B. Steel ,
L. M. Struck ,
H. I. Liu  and
J. A. Burns
A. F. Myers
Affiliation:
Surface and Microanalysis Science Division, NIST, Gaithersburg, MD 20899.
E. B. Steel
Affiliation:
Surface and Microanalysis Science Division, NIST, Gaithersburg, MD 20899.
L. M. Struck
Affiliation:
Surface and Microanalysis Science Division, NIST, Gaithersburg, MD 20899.
H. I. Liu
Affiliation:
MIT Lincoln Laboratory, L-216, 224 Wood St., Lexington, MA 02173.
J. A. Burns
Affiliation:
MIT Lincoln Laboratory, L-216, 224 Wood St., Lexington, MA 02173.
Get access

Abstract

Titanium silicide films grown on silicon were analyzed by transmission electron microscopy (TEM), electron diffraction, scanning transmission electron microscopy (STEM), and energy dispersive x-ray spectroscopy. The films were prepared by sequential rapid thermal annealing (RTA) at 675 °C and 850 °C of 16-nm-thick sputtered Ti on Si (001) wafers. In some cases, a 20-nm-thick TiN capping layer was deposited on the Ti film before the RTA procedure and was removed after annealing. TEM and STEM analyses showed that the silicide films were less than 0.1 μm thick; the capped film was more uniform, ranging in thickness from ∼ 25 – 45 nm, while the uncapped film ranged in thickness from ∼ 15 – 75 nm. Electron diffraction was used to determine that the capped film contained C54-TiSi2, C49-TiSi2, Ti5Si3, and possibly TiSi, and that the uncapped film contained C49-TiSi2, TiSi, Ti5Si3, unreacted Ti, and possibly C54-TiSi2.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 523: Symposium U – Electron Microscopy of Semiconducting Materials & ULSI Devices , 1998 , 97
Copyright
Copyright © Materials Research Society 1998

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Tung, R. T., Maex, K., Pellegrini, P. W., and Allen, L. H., eds., Silicide Thin Films — Fabrication. Properties, and Applications, Mater. Res. Soc. Symp. Proc. 402, (Materials Research Society, Pittsburgh, PA, 1996).Google Scholar
2. Murarka, S. P., Silicides for VLSI Applications, (Academic Press, New York, 1983).Google Scholar
3. Beyers, R., and Sinclair, R., J. Appl. Phys. 57, 5240 (1985).Google Scholar
4. Jeon, H., Sukow, C. A., Honeycutt, J. W., and Rozgonyi, G. A., and Nemanich, R. J., J. Appl. Phys. 71, 4269 (1992).10.1063/1.350808Google Scholar
5. Roy, R. A., Clevenger, L. A., Cabral, C. Jr., Saenger, K. L., Brauer, S., Jordan-Sweet, J., Bucchignano, J., Stephenson, G. B., Morales, G., and Ludwig, K. F., Jr., Appl. Phys. Lett. 66, 1732 (1995).Google Scholar
6. Liu, H. I., Bums, J. A., Wyatt, P. W., and Keast, C. L., IEEE Transactions on Electron Devices, in press (1997).Google Scholar
7. Matsubara, Y., Sakai, T., Ishigami, T., Ando, K., and Horiuchi, T., Thin Solid Films 270, 537 (1995).Google Scholar
8. Apte, P. P., Paranjpe, A., and Pollack, G., IEEE Electron Dev. Lett. 17, 506 (1996).Google Scholar
9. Shor, Y., and Pelleg, J., in Silicide Thin Films - Fabrication, Properties, and Applications, Mater. Res. Soc. Symp. Proc. 402, Tung, R. T., Maex, K., Pellegrini, P. W., and Allen, L. H., eds., (Mater. Res. Soc., Pittsburgh, PA, 1996) p. 107.Google Scholar
10. Nagabushnam, R. V., Sharan, S., Sandhu, G., Rakesh, V. R., Singh, R. K., and Tiwari, P., in Silicide Thin Films — Fabrication, Properties, and Applications, Mater. Res. Soc. Symp. Proc. 402, Tung, R. T., Maex, K., Pellegrini, P. W., and Allen, L. H., eds., (Mater. Res. Soc., Pittsburgh, PA, 1996), p. 113.Google Scholar
11. Ishigami, T., Matsubara, Y., Iguchi, M., and Horiuchi, T., in Advanced Metallization for Future ULSI, Mater. Res. Soc. Symp. Proc. 427, Tu, K. N., Mayer, J. W., Poate, J. M., and Chen, L. J., eds. (Materials Research Society, Pittsburgh, PA, 1996), p. 517 Google Scholar
12. Chen, L. J., Wu, I. W., Chu, J. J., and Neih, C. W., J. Appl. Phys. 63, 2778 (1988).Google Scholar
13. Joint Committee for Powder Diffraction Standards (JCPDS) files #10–0225, #35–0785, #27–0907, and #23–1079. (International Centre for Powder Diffraction Standards, 1997).Google Scholar
14. MacLispix is a freeware Macintosh image processing program written by David S. Bright at NIST. It is available at http://www-sims.nist.gov/divisionlmicroscopysoftware.html.Google Scholar
15. Massalski, T. B., Okamoto, H., Subramanian, P. R., and Kacprzak, L., Binary Alloy Phase Diagrams, Vol. 3, (American Society for Metals, Metals Park, OH, 1996), pp. 3367, 3370-–3371.Google Scholar