Abstract-The dynamic stresses around three collinear cracks in an infinite orthotropic plate are solved. In this configuration, two equal cracks are situated symmetrically on either side of a central crack, and time-harmonic elastic waves impinge perpendicularly to the cracks. The problem is solved by superimposing two types of solutions. One solution is that for a crack in an infinite orthotropic plate, and the other is for two collinear cracks. The unknown coefficients in the superimposed solution are determined by applying the boundary conditions at the surfaces of the three cracks using the Schmidt method. The dynamic stress intensity factors are calculated numerically for an orthotropic plate that corresponds to the elastic properties of a boron-epoxy composite.

In linear system, in-plane motions are decoupled from out-of-plane motions for planar frame structures. A theoretical method is proposed that permits the efficient calculations of modal characteristics of planar multi-story frame structures. There are 3 × m beam components for a planar m-story frame structure. By analyzing the transverse and longitudinal motions of each component simultaneously and considering the compatibility requirements across each frame joint, the undetermined variables of the entire m-story frame structure system can be reduced to six, regardless of the number of stories, and that can be determined by the application of the boundary conditions. The main feature of this method is to decrease the dimensions of the matrix involved in the finite element methods and certain other analytical methods.

We obtain values for the shear coefficient both below and above the critical frequency by comparing the results of the Timoshenko beam theory with experimental data published recently. The best results are obtained, by a least-square fitting, when different values of the shear coefficient are used below and above the critical frequency.

Based on the complex function theory and the homogenization principle, an universal approach of solving the dynamic stress concentration around a circular cavity in two-dimensional (2D) inhomogeneous medium is developed. The Helmholtz equation with variable coefficient is converted to the standard Helmholtz equation by means of the general conformal transformation method (GCTM) analytically. As an example, the inhomogeneous medium with density varying as a function of two spatial coordinates and the constant elastic modulus is studied. The dynamic stress concentration factors (DSCF) are calculated numerically. It shows that medium inhomogeneous parameters and wave numbers have significant influence on the dynamic stress concentration by the circular cavity in two-dimensional inhomogeneous medium.

Molecular spring vibration isolation technology has been invented in the recent years but it still needs further development in dynamics theory. A molecular spring isolation (MSI) consists of water and hydrophobic zeolites as working medium, providing high-static-low-dynamic stiffness. The dynamic properties of MSI are thoroughly investigated in this paper. Firstly, the nonlinear dynamic model of a vibration system support by MSI, i.e. the equation of motion, is established. Then the averaging method is employed to estimate the frequency response function (FRF) of the primary resonance. The phase trajectories diagram evolvement of primary resonance is also investigated to analysis the stability of the primary resonance response. From the plot of FRF, it is found that there exists a jump phenomenon induced by nonlinear stiffness, which may have harmful impacts on the equipment which is supposed to be protected from vibrations and shocks. To avoid jump, the FRF is analyzed to find the critical values of system parameters and a jump avoidance criterion is introduced.

In this paper, a non-classical plate model capturing the size effect is developed to study the forced vibration of functionally graded (FG) microplates subjected to a harmonic excitation transverse force. To this, the modified couple stress theory (MCST) is incorporated into the first-order shear deformation plate theory (FSDPT) to account for the size effect through one length scale parameter, only. Strong form of nonlinear governing equations and associated boundary conditions are obtained using Hamilton's principle. The solution process is implemented on two domains. The generalized differential quadrature (GDQ) method is first employed to discretize the governing equations on the space domain. A Galerkin-based scheme is then applied to extract a reduced set of the nonlinear equations of Duffing-type. On the second domain, through a time differentiation matrix operator, the set of ordinary differential equations are transformed into the discrete form on time domain. Eventually, a system of the parameterized nonlinear equations is acquired and solved via the pseudo-arc length continuation method. The frequency response curve of the microplate is sketched and the effects of various material and geometrical parameters on it are evaluated.

The 3(UPS)-S fully spherical parallel manipulator is the most famous fully spherical parallel manipulator (FSPM). In this paper, we propose a novel approach to model the forward displacement analysis of the manipulator to obtain its assembly modes. Rodrigues’ formula is used as a mathematical tool to perform the proposed modeling. Utilizing geometry of the manipulator, two coupled trigonometric equations are obtained. Using Bezout's elimination method, the two coupled equations are transformed to one polynomial of degree eight. Finally, an example is given with eight real solutions. Therefore, the degree of the polynomial is minimal and the introduced modeling method is optimal. This is very important to control modelling and dynamics simulation. Also, the proposed method can be extended to the other FSPMs (e.g., 3(RPSP)-S, 3(RPSP)-S and 3(RSS)-S).

In the paper, the influence of shape memory alloy (SMA) by varying the parameters such as volume fraction, orientation, and temperature on the hybrid-SMA composite laminate subjected to low-velocity impact is studied. A theoretical model for the composite laminated plate bonded with SMA reinforced layers is presented. The constitutive relation of the SMA layer is obtained by using the method of micromechanics. The governing relations obtained can be used for theoretical predications of thermomechanical properties of SMA plies in this paper. The analytical expressions for the hybrid SMA composite plate are derived based on Tanaka's constitutive equation and linear phase transformation kinetics presented by Liang and Rogers.

The laminated plate theory, first-order shear deformation theory and minimal potential energy principle is utilized to solve the governing equations of the hybrid composite plate and calculate the absorbed energies including tensile, shear and bending.

An orthogonal array and analysis of variance is employed to investigate the influence of the mentioned parameters on the energy absorption of the hybrid laminated plate. The results showed that the effects of the phase transformation temperature are more significant than the effects of the volume fraction and orientation of SMA on structural energy absorption.

The purpose of this paper is to study the flow field of the combustion chamber in a simulated rotary engine by using a computational approach. A dynamic mesh technique is employed to overcome the moving and shape varying computational domain inside the combustion chambers as the rotor is spinning. The key parameters include spark plug timing, leading side spark plug location and intake port location, which are used to investigate their influences on flow field and combustion performance of a rotary engine. It was discovered, with a dual spark plug configuration, that better flame propagation could be obtained through the change of ignition timing. In addition, to change the leading side spark plug location, it was also found that combustion efficiency is improved by shortening the distance from the top dead center (TDC) center line, which is consistent with available experimental results. This research also discovered that the intake port should be properly located in order to prevent pressure loss in the combustion chamber during the compression stroke.

Present paper addresses the numerical study of Sisko fluid model over stretching cylinder with variable thermal conductivity. The governing equations are simplified by incorporating the boundary layer approximations. After employing suitable similarity transformations partial differential equations are reduced to ordinary differential equations. To obtain numerical solution shooting method in conjunction with Runge-Kutta-Fehlberg method is used. For the analysis of model, variations due to different physical parameters involved in momentum and heat equations are reflected through graphs. Also, the effects of physical parameters on skin-friction coefficient and Nusselt number are represented through graphs as well as tables.

Using the method of Laplace transform, an analytical solution of unsteady rotating electroosmotic flow (EOF) through a parallel plate microchannel is presented. The analysis is based upon the linearized Poisson-Boltzmann equation describing electrical potential distribution and the Navies Stokes equation representing flow field in the rotating coordinate system. The discrepancy of present problem from classical EOF is that the velocity fields are two-dimensional. The rotating EOF velocity profile and flow rate greatly depend on time t, rotating parameter ω and the electrokinetic width K (ratio of half height of microchannel to thickness of electric double layer). The influence of the above dimensionless parameters on transient EOF velocity, volume flow rate and EO spiral is investigated.

Combined free and forced convection Couette-Hartmann flow of a viscous, incompressible and electrically conducting fluid in rotating channel with arbitrary conducting walls in the presence of Hall current is investigated. Boundary conditions for magnetic field and expressions for shear stresses at the walls and mass flow rate are derived. Asymptotic analysis of solution for large values of rotation and magnetic parameters is performed to highlight nature of modified Ekmann and Hartmann boundary layers. Numerical solution of non-linear energy equation and rate of heat transfer at the walls are computed with the help of MATHEMATICA. It is found that velocity depends on wall conductance ratio of moving wall and on the sum of wall conductance ratios of both the walls of channel. There arises reverse flow in the secondary flow direction near central region of the channel due to thermal buoyancy force. Thermal buoyancy force, rotation, Hall current and wall conductance ratios resist primary fluid velocity whereas thermal buoyancy force and Hall current favor secondary fluid velocity in the region near lower wall of the channel. Magnetic field favors both the primary and secondary fluid velocities in the region near lower wall of the channel.

This paper analytically investigates the reaction phenomenon in micro-combustors using a two-dimensional model. The length of micro-combustor is considered at finite length that makes a better physical model than other works. The micro-combustor medium is divided into three integral zones composed of preheat, reaction and post flame where the governing equations are solved using the matching conditions of neighboring zones. The reaction zone thickness is considered as a variable and predicted by an iterative solution. In order to validate the model, normalized magnitude of maximum temperature is compared with published computational data for different values of Peclet number that shows an acceptable agreement that confirms the accuracy of the predicted data. Since a higher wall temperature causes the reaction to be faster, increasing the normalized wall temperature will result to reduce reaction zone thickness.

This paper investigates the weakly nonlinear stability of a thin axisymmetric viscoelastic fluid with hydromagnetic effects on coating flow. The governing equation is resolved using long-wave perturbation method as part of an initial value problem for spatial periodic surface waves with the Walter's liquid B type fluid. The most unstable linear mode of a film flow is determined by Ginzburg-Landau equation (GLE). The coefficients of the GLE are calculated numerically from the solution of the corresponding stability problem on coating flow. The effect of a viscoelastic fluid under an applied magnetic field on the nonlinear stability mechanism is studied in terms of the rotation number, Ro, viscoelastic parameter, k, and the Hartmann constant, m. Modeling results indicate that the Ro, k and m parameters strongly affect the film flow. Enhancing the magnetic effects is found to stabilize the film flow when the viscoelastic parameter destabilizes the one in a thin viscoelastic fluid.

This article is presented the surface tension effect on the two-dimensional blade section of the partially submerged propeller (PSP). In this regard, blade is entered to the water that causes to splash the water due to the impact and free surface. Also, because of the blade's angle of attack suction side is vented by air and pressure side is wetted and gripped the water to generate thrust. The Reynolds-Averaged Navier-Stokes (RANS) method is used in order to predict the hydrodynamic flow from entering to the exit. Present paper is numerically investigated the effect of free surface and surface tension i.e. related to the Weber number. So, many numerical results are presented and discussed that are included volume fraction, ventilation zones, pressure distributions, vertical and horizontal forces at various Weber numbers.