This paper presents a dual-band bandpass filter with regular harmonic suppression. The proposed third-order filter consists of two microstrip stepped impedance resonators and single substrate integrated waveguide resonator. The mismatches in their higher order resonant frequencies are utilized to suppress the regular harmonics. The passbands are centered at f1 = 2.4 GHz and f2 = 3.5 GHz with fractional bandwidths of 5% and 7.5%, respectively. The measured midband insertion and return losses are better than 2.55 and 14.5 dB for the first, whereas for the second band, they are better than 1.95 and 14 dB. The filter offers at least 33 dB suppression of first three higher order regular harmonics of f1 and f2.

This paper presents the radio frequency (RF) design and experimental validation of a multifunctional bandpass filtering (BPF) concept with center frequency tunability and RF codesigned isolator and impedance matching functionality. The multifunctional bandpass filter/isolator (BPFI) concept combines frequency-tunable reciprocal resonators and nonreciprocal frequency-selective stages (NFSs) to realize center frequency tunability and fully directional transfer characteristics. The NFS, as the core component of the BPFI concept, exhibits frequency-selective transmission response in the forward direction and signal cancellation in the reverse direction. Its tunability is achieved by combining a transistor-based network with a tunable capacitively loaded coupled-line section. Furthermore, the NFS facilitates matching of different source loads allowing for the BPFIs to be used as reconfigurable matching networks. For experimental validation, an NFS and two BPFIs were designed, manufactured, and measured at L band. Their features include (i) NFS: center frequency tuning from 1.55 to 1.9 GHz with maximum directivity from 20 to 52 dB and gain from 0.3 to 1.3 dB. (ii) BPFI (topology A): center frequency tuning from 1.52 to 1.9 GHz with maximum directivity from 20 to 44 dB and gain from −1.5 to −0.5 dB. (iii) BPFI (topology C): ability to match complex loads with 26 + j18 Ω and 26 − j14 Ω.

This paper proposes a design method for designing a wideband filtering power amplifier (PA) based on terminated coupled line structure (TCLS). This method generates four transmission zeros and three transmission poles by loading stepped impedance resonator and short-circuit stubs on the four ports of TCLS, which greatly optimizes the in-band return loss and stopband suppression of the output matching network. In addition, the effective suppression of the second harmonic also increases the efficiency of the PA. In order to verify the effectiveness and superiority of this design method, a wideband bandpass filtering PA is designed and manufactured in 2.9–3.7 GHz. Measurement results show that the saturated output power is from 40.1 dBm to 41.2 dBm, the drain efficiency is greater than 60.3%, and the gain is 10–11.2 dB.

The design and development of a microstrip-based planar ultra-wideband (UWB) bandpass filter (BPF) with single/multiple interference rejection capability is presented. The proposed BPF structure is developed based on the broadside coupled mechanism of microstrip/coplanar waveguide (CPW). The BPF has microstrips and short-circuited CPW capacitively coupled through the substrate. The basic frequency response generated from this geometry covers the necessary UWB spectrum (3.1–10.6 GHz) and possesses appreciable characteristics due to dual transmission zeros at either passband boundary. Multiple resonators are embedded in the basic BPF structure to develop passband notches to circumvent unnecessary interferences. A low-pass filter is later integrated into geometry to extend the upper stopband. The proposed structure is compact and covers an area of only 14 × 11.4 mm2.

This paper presents a multi-mode resonator (MMR) for next-generation wireless systems that achieves single and dual-band bandpass filter (BPF) responses using a split-ring dual-path structure. The proposed BPF design is realized by employing two pairs of parallel couple lines and two symmetrical step-impedance open-circuited stubs (SIOCS). SIOCS are used to improve selectivity and increase the number of transmission zeros/poles. The proposed single-band BPF exhibits an ultra-wideband (UWB) response having a center frequency of 7.5 GHz, a minimum insertion loss of less than 0.48 dB, and a maximum return loss of 25.35 dB. The proposed UWB BPF has a stopband suppression of 39.34 dB up to 18 GHz and a 3 dB fractional bandwidth of 48.23%. Moreover, a dual-band BPF has been accomplished by utilizing the same architecture while slightly changing the MMR structure and adding more coupling. The center frequency (bandwidth) of the dual broadband BPF is 7.40 GHz (2.40 GHz) and 14.15 GHz (1.7 GHz), respectively. The measured minimum insertion loss is less than 0.23 dB and a return loss of less than 16.8 dB with 3 dB FBWs of 32.4 and 12.1%. Finally, two prototypes are fabricated to validate the proposed characteristics. The BPF's simulated and measured results are in good agreement.

A class of balanced dual-band bandpass filters (BPFs) with planar transversal-signal-interference coupled-line sections is reported. In their building balanced dual-band BPF stage under differential-mode excitation, a second-order quasi-elliptic-type dual-band bandpass filtering transfer function is obtained. Specifically, from the transversal interaction among their two open-ended and virtually-short-ended half-wavelength coupled-line paths, sharp-rejection differential-mode dual passbands with several out-of-band transmission zeros at both sides are realized. To attain high common-mode suppression levels within the differential-mode passbands, two open-ended line segments are connected at the symmetry plane of the devised balanced dual-band BPF stage. Moreover, higher-order schemes based on in-series-cascaded multi-stage designs to further increase differential-mode selectivity and in-band common-mode rejection are illustrated. The operational principles and parametric-analysis design rules of the engineered transversal-coupled-line-based balanced dual-band BPF approach are detailed. Additionally, for a rigorous interpretation of their zero/pole characteristics, a digital-modeling framework is applied to them to connect RF balanced filters with their discrete-time versions. For practical-validation purposes, a microstrip prototype of two-stage/fourth-order balanced dual-band BPF is built and tested. It exhibits measured differential-mode dual passbands with center frequencies of 1.464 GHz and 2.294 GHz, 3-dB fractional bandwidths of 8.74% and 9.68%, and in-band common-mode rejection levels above 23.16 dB and 31.36 dB, respectively.

In this paper, we present a miniaturized ultra-wideband (UWB) bandpass filter (BPF) with multiple transmission zeros (TZs), which is based on transition technology of microstrip with short-circuited coplanar waveguide (CPW). The ground plane of the BPF contains a multiple mode resonator (MMR)-based CPW which is capacitively linked through the dielectric to two open-circuited microstrip lines on the top. The MMR is initially designed to allocate its lowest three resonant modes quasi-equally inside the designated UWB spectrum (3.1–10.6 GHz). This is followed by optimization of microstrip lines to provide a good broadband response possessing minimum insertion loss, two TZs at the lower and upper passband edges that improve selectivity and a wide stopband with appreciable attenuation. Later, multiple-folded split ring resonators are coupled to the BPF to inject dual passband TZs. The predicted theory in simulation is verified against measured result and is found to be in good agreement. The prototype covers a substrate area of only 14.6 × 9.2 mm2.

In this paper, a compact quintuple notched-band ultra-wideband bandpass filter with high selectivity and wide bandwidth is proposed. The filter adopts an approximate closed-loop C-shaped stepped impedance resonator to generate triple notched bands, and uses Hilbert fractal curve slit and L-shaped resonator to create single notched band, respectively. Multiple notched-band are centered at 5.29, 6.61, 7.92, 8.95, and 9.93 GHz to eliminate undesired interference from coexisting wireless services of WLAN, C-band, and X-band. Additionally, two transmission zeros are introduced to enhance the sharp skirt selectivity up to 0.944. This filter could exhibit high sharp selectivity and wider bandwidth simultaneously. The filter is fabricated on a RT/Duroid 5880 substrate (ɛr = 2.2 and thickness = 0.787 mm) and measured to verify the simulation results. Both simulation and measurement are in well agreement, showing the good performance of the filter.

This paper reports on quasi-elliptic dual-band bandpass filters (BPFs) that were designed for the Filter Student Design Competition of the 2019 European Microwave Week. The proposed lumped-element (LE) BPF concept is based on two dual-band transversal cells and one multi-resonant cell that allow the realization of symmetric and asymmetric dual-band transfer functions shaped by six poles and five transmission zeros. A compact implementation scheme based on LE series resonators is proposed for size compactness and wide spurious free out-of-band response. For proof-of-concept demonstration purposes, a dual-band LE prototype with two passbands centered 1 and 1.5 GHz was designed, manufactured, and measured. It exhibited the following radio frequency measured performance characteristics. Passbands centered at 1.02 and 1.45 GHz, minimum insertion loss levels of 2.0 and 2.7 dB, and bandwidth of 146 and 105 MHz, respectively, for the first and the second passband, and out-of-band rejection >30 dB between 0 and 894 MHz, 1.17–1.34 GHz, and 1.72–6.9 GHz.

A compact ultra-wideband (UWB) bandpass filter (BPF) based on surface-to-surface transition technology with features of extended stopband and integrated interference mitigation characteristics is proposed. The basic structure consists of a modified multiple-mode resonator (MMR)-based co-planar waveguide in the ground surface and coupled in broadside manner with the microstrip lines on the top surface. Later, two open-circuited stubs are embedded in the feeding lines and two complementary split ring resonators are etched in the MMR to implement multiple in-band transmission zeros so as to circumvent interference. A prototype is fabricated and measured to validate the results obtained in simulation. The proposed UWB-BPF is compact in size with overall dimensions of 17.82 by 11.08 mm2.

In this paper, a triple-wideband bandpass filter (BPF) with controllable bandwidths based on two multi-mode stub-loaded resonators (MMSLRs) and a triple-mode resonator is presented. The MMSLR is loaded with two identical folded open-ended stubs and a T-shaped stub. Each passband of the tri-band BPF is formed by four resonant modes, which provide sufficient bandwidths to meet various application requirement. By adjusting the lengths of open-ended stubs, three passband bandwidths can be controlled individually. The center frequencies of the triple-wideband BPF are allocated at 2.7, 3.67, and 5.44 GHz, with the 3 dB fractional bandwidths (FBWs) of 20.1, 14.7, and 26.3%. Among the three passbands, the highest one covers the 5 G WiFi band (5.15–5.85 GHz). The measured results of the proposed filter exhibit excellent agreement with simulated results.

The design of a novel microstrip ultra-wideband (UWB) bandpass filter with quad narrow notched-band functionality is presented. The filter consists of a multi-mode resonator (MMR) constituted from two modified stepped-impedance stubs that generate six resonate modes, five of which are within the UWB passband where the sixth mode is used to extend the upper stopband of the filter. Two transmission zeroes are located at the 3-dB edge of the passband to enhance the filter's selectivity with a skirt factor of 0.955. The MMR is fed through asymmetric interdigital coupled-lines feed to produce controllable notched-band. Additional notched-bands are generated with a parasitic coupled line. The notched-bands are centered exactly to eliminate interference at 5.2 GHz (wireless local area network (WLAN)), 5.8 GHz (WLAN), 6.8 GHz (radio-frequency identification), and 8 GHz (X-band). Good agreement is obtained between simulation and measurement results. The highly compact filter has dimensions of 8.0 × 9.83 mm2.

In this paper, a tri-band bandpass filter (BPF) using asymmetric stub-loaded stepped-impedance resonator (SL-SIR) is presented. The asymmetric characteristic of SL-SIR broadens degrees of freedom for three controllable modes design. Also, the coupling coefficients (Mij) and the external quality factors (Qei) at each passband of the filter can be independently adjusted by the proposed mixed-type feedline structure. Besides, multi-transmission zeros are produced to improve the isolation and selectivity of the passbands. Finally, a tri-band BPF is operated at 1.9 GHz (time division long term evolution – TD-LTE band), 3.2 GHz (worldwide interoperability for microwave access – WiMAX band), and 5.8 GHz (wireless local area networks – WLAN band) and their insertion loss are 1.03, 0.94, and 1.27 dB, respectively. The measured results of the fabricated tri-band BPF exhibit good agreement with simulated results.

Synthesis of differential-mode bandpass filter (BPF) with good common-mode suppression has been described and demonstrated on the basis of ring dielectric resonator (RDR) for high-performance communication system. A RDR with two pairs of feeding lines has been used to excite TE01δ-mode. This unique combination of feeding lines and the ring resonator creates a differential passband. Meanwhile, TM01δ-mode of the DR can also be excited to achieve common-mode rejection in the stopband. Transmission zeros are created in the lower and upper stopband to further improve the selectivity of the proposed BPF. A second-order differential BPF is designed, fabricated and its performance is measured to validate the concept. There is good agreement between simulated and measured results.

A compact dual-band bandpass filter using stub-loaded stepped impedance resonator (SLSIR) with cross-slots is presented. The symmetric SLSIR is analyzed using even- and odd-mode techniques. Design equations are derived and they are used to guide the design of the circuits. Two passbands can be easily tuned by cross-slots and open stubs. Transmission zeros among each passbands are created, resulting in high isolation and frequency selectivity. An experimental circuit is fabricated and evaluated to validate the design concept. The fabricated filter is compact with 19.76 × 12.7 mm2. The measurement results are in good agreement with the full-wave simulation results.

A new quad-band bandpass filter for Global System for Mobile Communications, Wireless Local Area Network, and Worldwide Interoperability for Microwave Access is designed and fabricated using the stub-loaded resonator (SLR) technology without complex fabrication process, such as via-hole or multi-layer substrate. Owing to the embedded SLR, the proposed quad-mode resonator is compact. Equivalent circuits of the proposed quad-mode resonator are analyzed in detail, and high design freedom is shown because of shifting the passband frequencies individually. Good passband selectivity and isolation of the each passband at 1.8, 2.4, 3.5, and 5.2 GHz can be well achieved due to the transmission zeros appeared near the each passband edges. Experimental results show good agreement with the simulated results.