The Hercynian metamorphic event is poorly characterized in internal zone complexes of the Betic Cordillera (Spain), as it has been, to a great extent, overprinted by the mineral assemblages formed during the Alpine event. Identification of the signals of the Hercynian episode is easier in series largely unaffected by the Alpine event, such as Intermediate units between the Maláguide and the Alpujárride Complexes, which consist of a set of thrust slices. With the aim of characterizing the Hercynian paragenesis, a detailed comparison of the mineral assemblages of Paleozoic and overlying Triassic sequences, unaffected by the pre-Alpine event, was carried out. Mineral assemblages were characterized by X-ray diffraction, infrared spectroscopy, scanning electron microscopy, electron microprobe, and transmission-analytical electron microscopy. A rapid increase in the illite crystallinity values was observed at the Triassic—Paleozoic transition in the upper tectonic slices. In addition, the diagenetic to anchizonal dickite-, sudoite-, and pyrophyllite-bearing assemblages, characterizing the Triassic rocks, contrast with Paleozoic assemblages consisting of white K-mica ± paragonite + chlorite + mica-chlorite and chlorite-vermiculite mixed layers + garnet, suggesting that this assemblage corresponds to the Hercynian metamorphic event. This assemblage records temperatures on the order of 400ºC and an intermediate pressure regime. Paleozoic rocks contain, in addition, tobelite, which comprises some of the detrital grains and strongly masks the illite crystallinity values. Tobelite has been identified only in the upper thrust slices, suggesting that changes in the detrital input is primarily responsible for the disappearance of tobelite at the transition from the Maláguide to the Alpujárride domain. Tobelite appears finely intergrown with white K-mica and its origin is uncertain. It could have been inherited as tobelite, but a more likely hypothesis is that the intergrowths of white K-mica and tobelite were formed at low temperature from an NH4-bearing mica precursor.

Sudoite from diagenetic to very low-grade metaclastites of the Betic Cordillera was studied by X-ray diffraction and transmission/analytical electron microscopy. Sudoite formed directly from dickite, the assemblage dickite + sudoite + illite being replaced at increasing metamorphic grade by the assemblage pyrophyllite + sudoite + illite. Sudoite ranges in composition from Mg-rich to Fe-rich chemistries. In addition, a wide variety of mixed-layered structures (illite-sudoite, pyrophyllite-sudoite, and dickite-sudoite) was also identified. Mg-rich sudoite shows a mean chemical composition of (Al2.91Fe0.252+Mg1.80)(Si3.10Al0.90)O10(OH)8, and a IIb ordered structure with b = 9.055 Å. Intermediate Fe-Mg sudoite exhibits a very variable composition, the Fe-rich phases having a mean composition of (Al2.09Fe0.613+Fe0.872+Mg1.44)(Si3.31Al0.69O10(OH)8. These are disordered polytypes with b values ranging from 9.070 to 9.101 Å. Fe occurs in both octahedral sheets, according to two types of substitutions: Fe3+ for Al in the dioctahedral sheet and Fe2+ for Mg in the trioctahedral sheet. Sudoite with such a composition has not been described previously.

The clay mineralogy of a set of Tertiary marine sediments from the Internal Subbetic of the Betic External Zone was examined. Two types of sedimentary environment were distinguished: a platform environment consisting of limestones, marls, organogenic limestones, conglomerates and silexites distributed heterogeneously in time and space; and deep environments, where the sedimentation consisted of marls, marly limestones, marly clays and silexites, with no sedimentary gap. A third group of sediments studied belongs to the Águila Complex, with mineralogical and stratigraphic characteristics very similar to the platform sediments. This third type of sediment is found in the sediments of the Campo de Gibraltar Complex as large, disperse blocks resulting from tectonic activity. A very similar mineral association was observed in all three domains, consisting of smectite, illite, mixed-layer I-S, kaolinite and lesser amounts of palygorskite and chlorite. Materials mainly derive from the erosion of Mesozoic sediments, and sedimentation was controlled by the compressive tectonics of the region.

Zoned Ca-amphibole from metaclastic rocks and synfolial quartz-rich veins of the Jubrique area (Alpujárride complex, Betic Cordillera, Spain), and their significance in the Alpine metamorphic evolution are described here for the first time. Typical Al-rich metapelites from this area show assemblages with white mica and chlorite, with sporadic kyanite and chloritoid. Nevertheless, some Ca-richer phyllites, fine-grained quartzites and quartz veins, show assemblages consisting of Ca-amphibole, plagioclase, epidote, titanite, chlorite and quartz. Ca-amphibole, appearing in large radial grains as well as in smaller subhedral crystals, displays a zonation with actinolite cores, overgrown by magnesiohomblende (and edenite) and minor tschermakite (and pargasite or hastingsite). The zoning suggests growth during prograde metamorphism. Retrogressive rims are variably developed in the several lithotypes. General zonation is well described in terms of the tschermakite, the edenite and the Fe3+Al-1, the MgFe2+-1, the NaK-1 and the OHCl-1 exchanges. Chemical parameters (IVAl, A(Na+K), BNa) indicate an evolution from low- to medium-grade temperature and pressure. The Al-in-amphibole thermobarometer provides a range of prograde temperatures between ∼300°C (for cores) and ∼600°C (for rims), for pressures from ∼1 to ∼6 kbar, respectively. Despite the uncertainty resulting from the fact that the thermobarometer used was calibrated for metabasites, amphibole defines a prograde pressure-temperature path typical of Barrovian-type metamorphism.

The magnetobiostratigraphy study of the 130-m-thick Zújar section (Negratı́n clays unit, Guadix-Baza Basin, Spain) provides a remarkable opportunity to improve the correlation of European mammal biostratigraphy to the Geomagnetic Polarity Time Scale. The occurrence of 12 well-defined magnetozones and four paleontological sites with diagnostic faunas ranging from the MN 15 biozone (Ruscinian) to the MN 17 biozone (Villanyian), leads to an unambiguous correlation to chrons spanning from the Gilbert to the Matuyama epochs. This provides two new time constraints: (1) the boundary between MN 15 (Ruscinian) and MN 16 (Villanyian) biozones is recorded between chron C2An.3n and the base of chron C2An.2n and (2) the boundary between the upper and lower MN 16 subzones (Villanyian) is located between chron C2An.2n and the base of chron C2An.1n. The correlation between the Ruscinian–Villanyian boundary and the 3.3-myr-B.P. cooling event seems to be confirmed, while the early/late Villanyian boundary could be tentatively correlated to the glacial event at 2.6 myr B.P. Furthermore, MN 15 faunas are found in the lowermost part of chron C2Ar, which is in agreement with and reinforces the emplacement of the MN 14–MN 15 Ruscinian zones boundary at the reversal from chron 3n.1n to chron C2Ar.

Marine invertebrate borings are very rare in crystalline rocks, providing evidence of particular strategies producers use to colonise these unfavourable substrates. In the Sorbas Basin (Almería, southern Spain), Upper Miocene transgressive successions contain blocks of metamorphic and igneous rocks of the Nevado–Filabride Complex of the Betic Cordillera. Ichnological analysis of the embedded blocks shows the presence of two types of macroborings located in gneiss boulders, revealed to be an extraordinary case worldwide. The most abundant are regular hemispherical depressions ascribed reservedly to the well-known, mostly bivalve boring Gastrochaenolites. The second one is a pouch-like depression, tapering downward, elliptical in outline, and clearly different to other non-circular-in-outline, pouch-shaped macroborings. Thus, a new ichnogenus and ichnospecies Cuenulites sorbasensis has been defined. According to the overall shape, an endolithic or semi-endolithic bivalve using chemical means to bore is suggested as the tracemaker. Colonisation could be determined by sea-level coastal dynamics, with decreasing energy during advancing transgression allowing boring, which was then stopped due to supply of fine-grained sediment that killed the borers.

The volcano of Tallante (Pliocene) in the Betic Cordillera (Spain) exhumed a heterogeneous xenolith association, including ultramafic mantle rocks and diverse crustal lithologies. The latter include metagabbroids and felsic rocks characterized by quartz-rich parageneses containing spinel ± garnet ± sillimanite ± feldspars. Pressure–temperature estimates for felsic xenoliths overlap (at 0.7–0.8 GPa) those recorded by the mantle-derived peridotite xenoliths. Therefore, we propose that an intimate association of interlayered crust and mantle lithologies characterizes the crust–mantle boundary in this area. This scenario conforms to evidence provided by the neighbouring massifs of Ronda and Beni Bousera (and by other peri-Mediterranean deep crust/mantle sections) where exhumation of fossil crust–mantle boundary reveals that this boundary is not sharp. The results are discussed on the basis of recent geophysical and petrological studies emphasizing that in non-cratonic regions the crust–mantle boundary is often characterized by a gradational nature showing inter-fingering of heterogeneous lithologies. Silica-rich melts formed within the crustal domains intruded the surrounding mantle and induced metasomatism. The resulting hybrid crust–mantle domains thus provide suitable sources for exotic magma types such as the Mediterranean lamproites.

A comprehensive palaeoenvironmental reconstruction of the last 219 ka has been carried out by determining the isotopic signatures (δ18O and δ13C) in 766 samples of a thermogene travertine formation in the Guadix-Baza Tertiary basin (Granada, SE Spain). This travertine formation was dated from ≈ 220 to ≈ 5 ka by means of the alpha-spectrometry technique. Initially, the study of the δ18O values of the travertine formation was carried out because they are excellent indicators of the overall palaeoclimatic condition of a particular site. Likewise, the evolution of δ13C values, which can be directly related to the biomass development of the site, has also been studied. Finally, an integrated study of both isotopic records has been performed, identifying a total of 12 climatic periods based on their palaeoclimatic and palaeoenvironmental conditions. These periods are grouped into four climatic scenarios: scenario A, characterized by warm and dry periods; scenario B, characterized by cold and humid periods; scenario C, constituted by warm and humid periods; and scenario D, which is characterized by cold and dry periods. Palaeoclimatic scenarios A and B mainly characterized the palaeoclimatic evolution of the site, while in northern Europe the palaeoclimatic evolution is mainly characterized by scenarios C and D. Therefore, it is suggested that the palaeoenvironmental evolution at lower latitudes on the Iberian Peninsula is the opposite of that identified in northern Europe. However, the main climatic events identified at higher latitudes are also reflected in the studied area.

The blind reverse Bajo Segura Fault is located at the eastern extreme of the Trans-Alboran shear zone (Betic Cordillera, southeast Iberian Peninsula). The surface expression of recent activity of this blind ENE–WSW fault is represented by coseismic surface anticlines and growth synclines on both sides of the anticlines. In the synclines, the deformation of the most recent Quaternary materials is obscured by a sedimentary unit more than 30 m thick which was deposited during the later part of the Late Pleistocene and the Holocene. The present study reports three high-resolution seismic profiles made in the northern growth syncline, which was the one developed most by the Bajo Segura Fault. In these seismic profiles we recognize the boundary between pre-growth strata and growth strata. This marker, Early Pliocene in age, dates the start of the activity of this blind reverse fault. The geometry observed in the seismic profiles of the syntectonic strata, dating from the Late Pliocene and Quaternary, indicates a limb rotation folding mechanism. On seismic profile 2, the complex geometry of the Benejúzar anticline forelimb can be attributed to several splay faults close to the surface of Bajo Segura Fault.