The application of paraquat mixtures with residual herbicides before planting rice is a common treatment in Mississippi, and rice in proximity is susceptible to off-target movement of these applications. Four concurrent studies were conducted in Stoneville, MS, to characterize rice performance following exposure to a sublethal rate of paraquat, metribuzin, fomesafen, and cloransulam-methyl at different application timings. Herbicides were applied to rice at the growth stages of spiking to one-leaf (VEPOST), two- to three-leaf (EPOST), three- to four-leaf (MPOST), 7 d postflood (PFLD), and panicle differentiation (PD). Regardless of application timing, rice injury following exposure to paraquat was ≥45%. Delays in maturity were increased by 0.3 d d−1 following paraquat from emergence through PD. Dry weight, rough rice yield, panicle density, and germination were reduced by 18.7 g, 131.5 kg ha−1, 5.6 m−2, and 0.3%, respectively, per day from application of paraquat at emergence through PD. By 28 d after treatment (DAT), metribuzin injured rice 3% to 6%, and that injury did not translate into a yield reduction. Regardless of application timing, rice injury following fomesafen application ranged from 2% to 5% 28 DAT. Rice exposed to cloransulam-methyl EPOST exhibited the greatest root and foliar injury 21 DAT and 28 DAT, respectively. Additionally, when rice was exposed to cloransulam-methyl EPOST, yield was reduced to 6,540 kg ha−1 compared with a yield of 7,850 kg ha−1 from nontreated rice. Rice yield was negatively affected after paraquat was applied any time after rice emergence. However, applications of paraquat to rice at early reproductive growth stages reduced rough rice yield and seed germination the greatest. Application timing is crucial in determining severity of rice injury. Early-season injury to rice following paraquat application had less effect on yield compared with injury at later stages. Additionally, fields devoted to seed rice production are at risk for reduced seed germination if they are exposed to paraquat during early reproductive growth stages.

Amid widespread occurrence of herbicide-resistant weeds in the United States, the use of PRE herbicides and cover crops have resurged once again as important strategies for weed management in cropping systems. The objective of this experiment was to evaluate the length of soil residual weed control from PRE soybean herbicides and the detrimental impact of these herbicides on cover crop species using field treated soil in greenhouse bioassays. Greenhouse bioassays were conducted using soil from field experiments conducted in 2018 and 2019 in Arlington and Lancaster, WI. PRE herbicides consisted of imazethapyr, chlorimuron-ethyl, and cloransulam-methyl (acetolactate synthase [ALS] inhibitors); metribuzin (photosystem II [PS II] inhibitor); sulfentrazone, flumioxazin, and saflufenacil (protoporphyrinogen oxidase [PPO] inhibitors); acetochlor, S-metolachlor, dimethenamid-P, and pyroxasulfone (very long-chain fatty acid [VLCFA] inhibitors); and a nontreated control. Greenhouse bioassays were conducted using soil (depth, 0 to 10 cm) sampled at 0, 10, 20, 30, 40, and 50 d after treatment (DAT). Palmer amaranth and giant foxtail (weeds), and radish and cereal rye (cover crops) were used as bioindicators of herbicide levels in the soil. Bioassay results showed extended soil residual control of Palmer amaranth with sulfentrazone and pyroxasulfone; extended residual control of giant foxtail was observed with pyroxasulfone and S-metolachlor. Chlorimuron-ethyl and metribuzin were the most injurious herbicides to radish and cereal rye shortly after application, respectively, but minimal injury was observed from soil samples collected 50 DAT, indicating the use of PRE and fall-seeded cover crops in southern Wisconsin can be compatible. These results can support growers and practitioners with selection of effective PRE herbicides for Palmer amaranth and giant foxtail control and reduced impact on fall-seeded radish and cereal rye cover crops, altogether leading to more effective, diverse, and sustainable weed management programs.

Glyphosate-resistant (GR) Palmer amaranth is a problematic, annual broadleaf weed in soybean production fields in Nebraska and many other states in the United States. Soybean resistant to 2,4-D, glyphosate, and glufosinate (Enlist E3TM) has been developed and was first grown commercially in 2019. The objectives of this research were to evaluate the effect of herbicide programs applied PRE, PRE followed by (fb) late-POST (LPOST), and early-POST (EPOST) fb LPOST on GR Palmer amaranth control, density, and biomass reduction, soybean injury, and yield. Field experiments were conducted near Carleton, NE, in 2018, and 2019 in a grower’s field infested with GR Palmer amaranth in 2,4-D–, glyphosate-, and glufosinate-resistant soybean. Sulfentrazone + cloransulam-methyl, imazethapyr + saflufenacil + pyroxasulfone, and chlorimuron ethyl + flumioxazin + metribuzin applied PRE provided 84% to 97% control of GR Palmer amaranth compared with the nontreated control 14 d after PRE. Averaged across herbicide programs, PRE fb 2,4-D and/or glufosinate, and sequential application of 2,4-D or glufosinate applied EPOST fb LPOST resulted in 92% and 88% control of GR Palmer amaranth, respectively, compared with 62% control with PRE-only programs 14 d after LPOST. Reductions in Palmer amaranth biomass followed the same trend; however, Palmer amaranth density was reduced 98% in EPOST fb LPOST programs compared with 91% reduction in PRE fb LPOST and 76% reduction in PRE-only programs. PRE fb LPOST and EPOST fb LPOST programs resulted in an average soybean yield of 4,478 and 4,706 kg ha−1, respectively, compared with 3,043 kg ha−1 in PRE-only programs. Herbicide programs evaluated in this study resulted in no soybean injury. The results of this research illustrate that herbicide programs are available for the management of GR Palmer amaranth in 2,4-D–, glyphosate-, and glufosinate-resistant soybean.

Palmer amaranth is one of the most troublesome weeds of soybean in the United States. To effectively control this weed it is necessary to optimize timing of PRE residual herbicides to mitigate Palmer amaranth emergence. Field studies were conducted in 5 site-years to assess the effect of application timing 12 to 16 d prior to planting (preplant) and at planting (PRE) on soybean injury and longevity of Palmer amaranth control using five residual herbicide treatments. A reduction in longevity of Palmer amaranth control was observed when S-metolachlor + metribuzin and flumioxazin + chlorimuron-ethyl were applied preplant vs. PRE in 2 of the 5 site years. Sulfentrazone, sulfentrazone + cloransulam-methyl, and saflufenacil + dimethenamid-P + pyroxasulfone + metribuzin did not reduce longevity of Palmer amaranth control when applied preplant vs. PRE in all 5 site-years. Visible estimates of soybean injury were lower at 21 d after planting when herbicides were applied 12 to 16 d preplant vs. PRE. These findings suggest that preplant applications can be used to reduce the potential for crop injury and may not result in reduced longevity of control when herbicides with a prolonged residual activity are used. Preplant herbicides increase the likelihood of the residuals being activated prior to subsequent weed emergence as opposed to PRE herbicides applied at soybean planting.

Horseweed biotypes resistant to glyphosate and ALS-inhibiting herbicides are becoming more prevalent in Canada and the United States and present a significant management challenge in field crops. Tolpyralate is a recently commercialized herbicide for use in corn that inhibits 4-hydroxyphenylpyruvate dioxygenase (HPPD), and there is little information regarding its efficacy on horseweed. Six field experiments were conducted in 2017 and 2018 at four locations in Ontario, Canada, to determine the biologically effective dose of tolpyralate and tolpyralate + atrazine and to compare label rates of tolpyralate and tolpyralate + atrazine to currently accepted herbicide standards for POST control of glyphosate and cloransulam-methyl resistant (MR) horseweed. At 8 wk after application (WAA), tolpyralate at 4.8 and 22.6 g ha–1 provided 50% and 80% control, respectively. When applied with atrazine at a 1:33.3 tank-mix ratio, 22.3 + 741.7 g ha–1 provided 95% control of MR horseweed. The addition of atrazine to tolpyralate at label rates improved control of MR horseweed to 98%, which was similar to the control provided by dicamba:atrazine and bromoxynil + atrazine. The results of this study indicate that tolpyralate + atrazine provides excellent control of MR horseweed POST in corn.

During 2016 and 2017, four field experiments were conducted at Huron Research Station near Exeter, ON, to evaluate the sensitivity of dry bean grown under a strip-tillage cropping system, to potential herbicides for the control of glyphosate-resistant (GR) horseweed. At 8 wk after emergence (WAE), saflufenacil, metribuzin, saflufenacil+metribuzin, 2,4-D ester, flumetsulam, cloransulam-methyl, and chlorimuron-ethyl caused 13% to 32%, 8% to 52%, 32% to 53%, 5% to 7%, 13% to 21%, 16% to 29%, and 23% to 43% visible injury in dry beans, respectively. Saflufenacil decreased aboveground biomass 65% in kidney bean and 80% in white bean. Metribuzin decreased biomass 82% in kidney bean and 50% in white bean. Saflufenacil+metribuzin decreased biomass 88% in kidney bean, 68% in small red bean, and 80% in white bean. Chlorimuron-ethyl decreased biomass 40% in white bean. There was no decrease in dry bean biomass with the other herbicides evaluated. Metribuzin and saflufenacil+metribuzin reduced kidney bean seed yield 72% and 76%, respectively. Saflufenacil+metribuzin, flumetsulam, cloransulam-methyl, and chlorimuron-ethyl reduced small red bean seed yield 39%, 27%, 30%, and 54%, respectively. Saflufenacil, metribuzin, saflufenacil+metribuzin, flumetsulam, cloransulam-methyl, and chlorimuron-ethyl reduced seed yield of white bean 52%, 32%, 62%, 33%, 42%, and 62%, respectively. There was no decrease in dry bean yield with the other herbicides evaluated. Among herbicides evaluated, 2,4-D ester caused the least crop injury with no effect in dry bean seed yield.

A population of common ragweed not controlled by an acetolactate synthase (ALS)-inhibiting herbicide, cloransulam-methyl, was sampled near Dunkirk, IN, the first year of the herbicide's commercialization in 1998. Resistance in the Dunkirk population was confirmed by treating greenhouse-grown seedlings with cloransulam-methyl. ALS activity assays and DNA sequencing were used to identify the resistance mechanism. ALS isolated from plants of the Dunkirk population exhibited an R/S ratio for cloransulam-methyl of >5,000 when compared to ALS activity of populations from Claire City, SD, and V & J Seed Farms. R/S ratios of 4,100 and 110 were observed for two other ALS-inhibiting herbicides, chlorimuron and imazaquin, respectively. DNA sequencing revealed that an inferred leucine for tryptophan substitution at amino acid position 574 in ALS was responsible for the observed herbicide resistance. Additionally, DNA sequencing revealed significant variability among common ragweed ALS alleles. Two fragments of ALS were sequenced from three plants each of the Claire City and Dunkirk populations, totaling 688 nucleotide base pairs, of which 72 were polymorphic.

Weed control in white beans is currently limited by the small number of registered herbicides. The tolerance of two white bean cultivars, ‘AC Compass’ and ‘OAC Thunder’, to various postemergence (POST) herbicides at the maximum use rate and twice the maximum use rate for soybean or corn was evaluated at two Ontario locations in 2001 and 2002. Generally, the two cultivars did not differ in their response to the POST herbicides. POST applications of imazamox plus fomesafen, imazamox plus bentazon, and cloransulam-methyl decreased plant height, shoot dry weight, and yield by as much as 29, 41, and 55%, respectively, and increased seed moisture content up to 3.9%. POST applications of thifensulfuron, chlorimuron, and bromoxynil decreased plant height as much as 57%, shoot dry weight by up to 71%, yield as much as 93% and increased seed moisture content up to 15.5%. Based on these results, AC Compass and OAC Thunder white beans do not possess sufficient tolerance to support the registration of imazamox plus bentazon, imazamox plus fomesafen, cloransulam-methyl, thifensulfuron, chlorimuron, and bromoxynil.

White bean producers have a limited number of herbicide options available for annual grass and broadleaf weed control. Tolerance of two white bean cultivars to preemergence (PRE) applications of S-metolachlor, S-metolachlor + imazethapyr, flumetsulam + S-metolachlor, cloransulam-methyl, clomazone, clomazone + imazethapyr, and clomazone + S-metolachlor at the maximum labeled rate in soybean (1×) and twice the labeled rate (2×) were studied at two Ontario locations (Exeter and Ridgetown) in 2001 and 2002. S-Metolachlor, clomazone, and clomazone + S-metolachlor generally had no negative effect on plant height, dry weight, maturity, and yield. S-Metolachlor + imazethapyr and clomazone + imazethapyr reduced plant height, dry weight, and yield as much as 21, 42, and 24%, respectively. Flumesulam + S-metolachlor and cloransulam-methyl reduced plant height, dry weight, and yield as much as 39, 58, and 43%, respectively. White beans are tolerant to PRE applications of S-metolachlor, clomazone, and clomazone + S-metolachlor. White beans are sensitive to PRE applications of S-metolachlor + imazethapyr, flumetsulam + S-metolachlor, clomazone + imazethapyr, and cloransulam-methyl.

Field experiments were conducted in 2011 through 2013 at the MSU Southern Agricultural Research Center near Huntley, MT, to evaluate the effectiveness of various PRE and POST herbicide programs for kochia control in the absence of a crop. PRE herbicides labeled for corn, grain sorghum, soybean, wheat/barley, and/or in chemical fallow were applied at recommended field-use rates. Acetochlor + atrazine, S-metolachlor + atrazine + mesotrione, and sulfentrazone applied PRE provided ≥91% control of kochia at 12 wk after treatment (WAT). Metribuzin, metribuzin + linuron, and pyroxasulfone + atrazine PRE provided 82% control at 12 WAT. PRE control with acetochlor + flumetsulam + clopyralid, pyroxasulfone alone, and saflufenacil + 2,4-D was ≤23% at 12 WAT. Paraquat + atrazine, paraquat + linuron, and paraquat + metribuzin controlled kochia ≥98% at 5 WAT. POST control with bromoxynil + fluroxypyr, paraquat, tembotrione + atrazine, and topramezone + atrazine treatments averaged 84% at 5 WAT, and did not differ from glyphosate. Control with POST-applied bromoxynil + pyrasulfotole, dicamba, diflufenzopyr + dicamba + 2,4-D, saflufenacil, saflufenacil + 2,4-D, saflufenacil + linuron was 67 to 78% at 5 WAT. Because of the presence of kochia resistant to acetolactate synthase-inhibiting herbicides at the test site, cloransulam-methyl was not a viable option for kochia control. In a separate greenhouse study, kochia accessions showed differential response to the POST herbicides (labeled for corn or soybean) tested. Tembotrione + atrazine, topramezone + atrazine, lactofen, or fomesafen effectively controlled the glyphosate-resistant kochia accession tested. Growers should utilize these effective PRE- or POST-applied herbicide premixes or tank mixtures (multiple modes of action) to control herbicide-resistant kochia accessions in the field. PRE herbicides with 8 wk of soil-residual activity on kochia would be acceptable if crop competition were present; however, a follow-up herbicide application may be needed to obtain season-long kochia control in the absence of crop competition.

Studies were conducted from 2001 through 2003 to determine the extent of resistance to acetolactate synthase (ALS) inhibitors and glyphosate in Ohio horseweed biotypes. The response of 66 horseweed biotypes to cloransulam-methyl and glyphosate was determined in the greenhouse. Application of 0.07 kg ai cloransulam/ha reduced plant biomass by less than 60% for 38 of the 66 biotypes. Application of 3.4 kg ae glyphosate/ha reduced biomass by at least 80% for the 51 biotypes collected in 2001, but biomass was similar to that of nontreated plants for 11 of the 15 populations collected in 2002. A dose–response study was conducted with selected biotypes, and a nonlinear, logistic dose–response curve was fit to the data to calculate the herbicide dose required to reduce fresh weight 50% (GR50). On the basis of GR50 values, the resistance ratio (R/S) for two ALS-resistant biotypes was 34 and 943 for chlorimuron-ethyl and 32 and 168 for cloransulam, respectively. The R/S ratio for two glyphosate-resistant biotypes was 33 and 39. Results of these studies indicate that, in 2002, ALS-resistant horseweed was widespread throughout Ohio, whereas resistance to glyphosate occurred primarily in several counties in southwestern Ohio.

Several populations of smooth pigweed with resistance to imidazolinone (IMI) herbicides have been identified in recent years. One IMI-resistant population (R2) was 10-fold more sensitive to cloransulam-methyl in the greenhouse when compared with a susceptible (S) population. Laboratory studies were conducted to determine if differences in the absorption, translocation, and metabolism of cloransulam-methyl existed between S and R2 populations and to determine if these differences could account for the whole-plant responses observed in the greenhouse. Enzyme assays were also conducted to determine if differences in acetolactate synthase (ALS) sensitivity to cloransulam-methyl existed between S and R2 populations. Absorption of foliar-applied cloransulam-methyl was rapid and similar in both populations of smooth pigweed. Translocation of the absorbed radioactivity out of the treated leaf was symplastic and generally similar in both populations. Translocated radioactivity was detected primarily in shoots above and below the treated leaf with little movement to the roots. 14C-cloransulam-methyl metabolism was also similar in S and R2 populations. Differential tolerance to cloransulam-methyl in S and R2 populations in the greenhouse cannot be explained by differences in the absorption, translocation, and metabolism of this herbicide. However, ALS from R2 was 25-fold more sensitive to inhibition by cloransulam-methyl than ALS from S.

Herbicide applications often do not reach their full potential because only a small amount of the active ingredients reaches the intended targets. Selecting the appropriate application parameters and equipment can allow for improved efficacy. The objective of this research was to evaluate the effect of droplet size on efficacy of six commonly used herbicides. Atrazine (1.12 kg ai ha−1), cloransulam-methyl (0.18 g ai ha−1), dicamba (0.14 kg ae ha−1), glufosinate (0.59 kg ai ha−1), saflufenacil (12.48 g ai ha−1), and 2,4-D (0.20 kg ae ha−1) were applied to seven plant species using an XR11003 nozzle at 138, 276, and 414 kPa and a AI11003 nozzle at 207, 345, and 483 kPa. Each herbicide, nozzle, and pressure combination was evaluated for droplet size spectra. Treatments were applied at 131 L ha−1 to common lambsquarters, common sunflower, shattercane, soybean, tomato, velvetleaf, and volunteer corn. Control from 2,4-D was observed to increase approximately 12% on average for all species except common lambsquarters as droplet size increased from medium to very coarse (Dv0.5 303 to 462 μm; Dv0.5 is droplet size such that 50% of spray volume is contained in droplets of equal or smaller size). Control with atrazine was near 95% for common lambsquarters, common sunflower, and soybean. Atrazine provided the greatest shattercane control using a medium (Dv0.5 325 μm) droplet, whereas the same droplet size provided the lowest tomato control. Control of common lambsquarters, shattercane, and tomato with cloransulam-methyl increased 79% when decreasing droplet size from extremely coarse to fine (Dv0.5 637 to 228 μm). Dicamba control of common lambsquarters increased 17% using a medium droplet compared with a fine droplet (Dv0.5 279 to 204 μm). Dry weight of common sunflower and soybean was reduced 21% using dicamba when using a very coarse spray compared with a fine spray classification (Dv0.5 491 to 204 μm). Common lambsquarters control using glufosinate increased 18% using a fine spray classification (Dv0.5 186 μm) compared with medium (Dv0.5 250 μm) and both very coarse droplet sizes (Dv0.5 470 and 516 μm). Conversely, tomato and velvetleaf control with glufosinate was maximized using a very coarse (Dv0.5 470 and 516 μm) or extremely coarse droplet (Dv0.5 628 μm) with increases of 11 and 25% compared with a fine spray (Dv0.5 186 μm). Saflufenacil control of volunteer corn was 38% greater using extremely coarse droplets (Dv0.5 622 μm) than fine, medium, and very coarse spray classifications (Dv0.5 257 to 514 μm). Overall, spray classifications for the herbicides evaluated play an important role in herbicide efficacy and should be tailored to the herbicide being used and the targeted weed species.

Deciding on the most efficacious PRE and POST herbicide options and their ideal application timing can be challenging for soybean producers. Climatic events during the 14 d before and after herbicide application can further complicate decisions because of their influence on herbicide effectiveness. Nine field trials were conducted at three locations in southwestern Ontario from 2003 to 2006, to determine the most effective PRE and POST soybean herbicides for control of common lambsquarters, common ragweed, green foxtail, and redroot pigweed. When precipitation was low at least 7 d before and after herbicide application weed control was reduced in treatments that included imazethapyr (PRE or POST) or flumetsulam/S-metolachlor (a premix formulation) (PRE). Cumulative precipitation during the 12 d after PRE application that exceeded the monthly average by at least 60% reduced common lambsquarters control when metribuzin was applied and green foxtail control when imazethapyr was applied. Delaying application of imazethapyr + bentazon to a later soybean growth stage decreased control of common lambsquarters and green foxtail; however, environmental conditions appeared to influence these results. Precipitation on the day of application decreased control of common ragweed and redroot pigweed more with quizalofop-p-ethyl + thifensulfuron-methyl + bentazon compared with imazethapyr + bentazon. Soybean yield varied among POST herbicide treatments because of reduced weed control. This research confirms that environmental conditions pre- and postapplication, as well as application timing, influence herbicide efficacy and should be considered by growers when selecting an herbicide program.

Three studies were conducted in 1999 and 2000 to determine whether acetolactate synthase (ALS)–resistant common ragweed and giant ragweed biotypes were present in Ohio. Results of field studies indicated that biotypes of both species had cross-resistance to three chemical families of ALS-inhibiting herbicides. Cloransulam-methyl applied postemergence at 9, 18, and 36 g/ha controlled more than 85% of two susceptible populations of common and giant ragweed 28 d after treatment, whereas less than 35% control of resistant populations was achieved at the same rates. Fomesafen, lactofen, and glyphosate applied alone at the recommended rates provided the most effective control of ALS-resistant common and giant ragweed. Mixtures of cloransulam-methyl with either fomesafen or lactofen did not significantly increase ALS-resistant common and giant ragweed control compared with each diphenylether herbicide used alone. Dose–response bioassays conducted in the greenhouse indicated that susceptible common and giant ragweed tended to be more sensitive to cloransulam-methyl and chlorimuron than to imazamox. ALS-resistant common ragweed demonstrated a high level of resistance to all the herbicides tested because GR50 values were not reached with rates 1,000 times higher than the recommended rate. ALS-resistant giant ragweed treated with 13,000 g/ha of chlorimuron and 18,000 g/ha of cloransulam-methyl was not inhibited enough to obtain a GR50 value, thus also demonstrating a high level of resistance. The GR50 for ALS-resistant giant ragweed treated with imazamox was 1,161 g/ha. Results of these studies confirmed the presence of ALS–cross-resistant populations of common and giant ragweed in Ohio and suggest that herbicides with different mechanisms of action will be required to manage these weeds effectively.

Experiments were conducted in 2008, 2009, and 2010 to determine the influence of water source as carrier and other agrochemicals on glyphosate efficacy and physicochemical compatibility. Glyphosate efficacy was not affected by most water sources, when compared with deionized water, although response was not consistent across all weed species, including cereal rye, common lambsquarters, common ragweed, goosegrass, Italian ryegrass, large crabgrass, Palmer amaranth, tall morningglory, and wheat. Control by glyphosate was not negatively affected when coapplied with cloransulam-methyl, dicamba, flumioxazin, pyrithiobac-sodium, thifensulfuron-methyl plus tribenuron-methyl, trifloxysulfuron-sodium, and 2,4-D but was affected by acifluorfen and glufosinate. Calcium, manganese, and zinc solutions consistently reduced weed control by glyphosate, whereas boron seldom affected efficacy. Compared with deionized water, Italian ryegrass control was affected by water sources when applied at seedling and jointing stages more so than at tillering and heading growth stages. Calcium, manganese, and zinc reduced control regardless of growth stage. Precipitates were not produced when glyphosate was applied with the water sources or fertilizer solutions. However, transient precipitates developed when glyphosate was coapplied with cloransulam-methyl, flumioxazin, thifensulfuron-methyl plus tribenuron-methyl, and trifloxysulfuron-sodium but not when coapplied with acifluorfen, dicamba, glufosinate, pyrithiobac-sodium, and 2,4-D. Solution pH ranged from 4.11 to 5.60 after glyphosate was added, regardless of solution pH before glyphosate addition.

Selection for biotypes of common ragweed expressing resistance to acetolactate synthase (ALS)–inhibiting herbicides has increased in North Carolina and surrounding states. Research was conducted in North Carolina to confirm common ragweed resistance to diclosulam and to compare herbicide programs designed to control ALS-resistant common ragweed in corn, cotton, peanut, and soybean. In greenhouse experiments, 50% inhibition values following POST application of diclosulam for mortality of plants, visual estimates for percentage of control, and percentage of reduction in plant fresh weight were 557- to 653-fold higher for the suspected ALS-resistant biotype compared with a suspected ALS-susceptible biotype. Herbicides with different modes of action, including atrazine, dicamba, and glyphosate in corn; fomesafen, glyphosate, MSMA, and prometryn in cotton; bentazon, flumioxazin, and lactofen in peanut; and flumioxazin, glyphosate, and lactofen in soybean controlled common ragweed more effectively than programs relying on cloransulam-methyl (soybean), diclosulam (peanut), thifensulfuron (corn), and trifloxysulfuron (cotton), which typically control nonresistant common ragweed populations. Applying tank-mix or sequential applications of herbicides with different modes of action was effective in controlling ALS-resistant common ragweed in all crops.

Viable horseradish roots of various sizes remain in the soil after harvest and can develop into volunteer plants in subsequent crops. Experiments were conducted to evaluate POST herbicides on volunteer horseradish control and to determine if efficacy is dependent upon horseradish root segment size, herbicide rate, horseradish cultivar, or horseradish shoot size at application. In the greenhouse, horseradish root segment size did not affect herbicide efficacy. Chlorimuron, cloransulam, imazamox, (2,4-dichlorophenoxy)acetic acid (2,4-D) amine, halosulfuron, and imazethapyr plus imazapyr provided greater than 95% foliar control of volunteer horseradish. Chlorimuron, halosulfuron, and 2,4-D amine were also among the herbicides that provided the greatest reduction in horseradish root biomass (69% or greater). Glyphosate provided little foliar control (76%) and root biomass reduction (57%) after one application. The efficacy of 2,4-D amine on horseradish foliage and root biomass increased with increasing herbicide rate; however, the response of horseradish to halosulfuron was similar for all rates evaluated. Root biomass reduction of the horseradish cultivar ‘1573’ was less responsive to 2,4-D amine and halosulfuron applications compared with ‘1038’ and ‘1722’. However, foliar injury from 2,4-D amine and halosulfuron was less for the horseradish cultivar ‘1038’ compared with ‘1573’ and ‘1722’. In field studies, 2,4-D amine applied to 15- and 30-cm-tall horseradish and halosulfuron applied to 15-cm-tall horseradish resulted in the greatest foliar and root biomass reduction. This study indicated that in-season control of volunteer horseradish in rotational crops may be achieved through proper herbicide selection.

Greenhouse studies were initiated to evaluate glyphosate alone and tank-mixed with acifluorfen, CGA 277476, chlorimuron, cloransulam-methyl, fomesafen, imazaquin, or pyrithiobac on seedling johnsongrass, broadleaf signalgrass, pitted morningglory, and hemp sesbania. Johnsongrass and broadleaf signalgrass control by glyphosate was not affected by the selective herbicides applied in mixtures. Pitted morningglory control by glyphosate ranged from 0% with 280 g ai/ha to 67% with 840 g/ha. There was an additive effect when selective herbicides were added to 280 g/ha glyphosate 2 wk after treatment (WAT). When acifluorfen was added to 560 g/ha glyphosate, pitted morningglory control 2 WAT increased to 100% compared with 55% with glyphosate alone. Similarly, the addition of fomesafen or acifluorfen to 840 g/ha glyphosate controlled pitted morningglory 2 WAT by 90 and 98%, respectively, compared with 67% with glyphosate alone. Only tank mixtures of acifluorfen, CGA 277476, or fomesafen, and 840 g/ha glyphosate reduced fresh weight compared with glyphosate alone 4 WAT. Acifluorfen, CGA 277476, and fomesafen controlled pitted morningglory by 85 to 100% when added to 1,120 g/ha glyphosate. Both acifluorfen and fomesafen effectively controlled hemp sesbania without the addition of glyphosate 2 WAT. Chlorimuron and pyrithiobac added to 1,120 g/ha glyphosate increased hemp sesbania control to 88 and 99%, respectively, compared with 45% with glyphosate alone 2 WAT. CGA 277476, cloransulam-methyl, imazaquin, and pyrithiobac were antagonistic to hemp sesbania fresh weight reduction when compared with the expected response, but fresh weights were still reduced more than with the same rate of glyphosate alone.

The evolution of glyphosate and acetolactate synthase (ALS) inhibitor-resistant common waterhemp in the Midwestern United States has reduced the number of effective POST herbicide options for management of this problem weed in glyphosate-resistant soybean. Moreover, common waterhemp emerges throughout the crop growing season, justifying the need to evaluate herbicide programs that provide season-long control. The objectives of this study were to compare POST-only and PRE followed by (fb) POST herbicide programs for control of glyphosate-resistant common waterhemp in glyphosate-resistant soybean. Field experiments were conducted in 2013 and 2014 in Dodge County, NE, in a field infested with glyphosate-resistant common waterhemp. Programs containing PRE herbicides resulted in ≥83% control of common waterhemp and densities of ≤35 plantsm–2 at 21 d after PRE (DAPRE). Post-only herbicide programs resulted in <70% control and densities of 107 to 215 plants m–2 at 14 d after early-POST (DAEPOST) treatment. PRE fb POST herbicide programs, including saflufenacil plus imazethapyr plus dimethenamid-P, sulfentrazone plus cloransulam, or S-metolachlor plus metribuzin, fb fomesafen plus glyphosate; S-metolachlor plus fomesafen fb acifluorfen plus glyphosate resulted in >90% control of glyphosate-resistant common waterhemp throughout the growing season, reduced density to ≤7plantsm–2, ≥92% biomass reduction, and soybean yield >2,200kg ha–1. Averaged across herbicide programs, common waterhemp control was 84%, and density was 15 plants m–2 with PRE fb POST herbicide programs compared with 42% control, and density of 101 plants m–2 with POST-only herbicide programs at harvest. Results of this study indicated that PRE fb POST herbicide programs with effective modes of action exist for season-long control of glyphosate-resistant common waterhemp in glyphosate-resistant soybean.