A laser ion source (LIS) is a promising candidate as an ion source for heavy-ion inertial fusion (HIF), where a pulsed ultra-intense and low-charged heavy ion beam is required. It is a key development for a LIS to transport laser-produced plasma with a magnetic field to achieve a high-current beam. The effect of a tapered magnetic field on laser-produced plasma is demonstrated by comparing the results with a straight solenoid magnet. The magnetic field of interest is a wider aperture on a target side and narrower aperture on an extraction side. Based on the experimentally obtained results, the performance of a scaled LIS for HIF was estimated.

To realize a heavy-ion inertial fusion (HIF) driver, we have studied a possibility of laser ion source (LIS). A LIS can provide high-current high-brightness heavy-ion beams; however, it was difficult to manipulate the beam parameters. To overcome the issue, we employed a pulsed solenoid in the plasma drift section and investigated the effect of the solenoid field on singly charged iron beams. The rapid ramping magnetic field could enhance limited time slice of the current and simultaneously the beam emittance changed accordingly. This approach may also be useful to realize an ion source for HIF power plant.

The measurement of very narrow high density plasma blocks of high ion energy from targets irradiated with ps-TW laser pulses based on a new skin depth interaction process is an ideal tool for application of ion implantation in materials, especially of silicon, GaAs, or conducting polymers, for micro-electronics as well as for low cost solar cells. A further application is for ion sources in accelerators with most specifications of many orders of magnitudes advances against classical ion sources. We report on near band gap generation of defects by implantation of ions as measured by optical absorption spectra. A further connection is given for studying the particle beam transforming of n-type semiconductors into p-type and vice versa as known from sub-threshold particle beams. The advantage consists in the use of avoiding aggressive or rare chemical materials when using the beam techniques for industrial applications.

We report on the results concerning the characteristics and the behavior of expanding plasma generated by a Laser Ion Source (LIS). The LIS technique is an efficient means in producing of multi-charged ions utilizing pulsed laser beams. In order to extract Cu ions, in this experiment an XeCl excimer UV laser was employed, providing a power density on the target surface up to 5 × 108 W/cm2. Two typologies of diagnostic systems were developed in order to detect the plasma current and the ion energy. The time-of-flight (TOF) measurements were performed exploiting either a Faraday cup or an Ion Energy Analyzer (IEA). This latter allowed getting quantitative information about the relative ion abundances, their kinetic energy and their charge state. To study the plasma characteristics we measured the total etched material per pulse at 70 mJ. It was 0.235 μg and the overall degree of ionization, 16%. The angular distribution of the ablated material was monitored by optical transmission analysis of the deposited film as a function of the angle with respect to the normal to the target surface. Applying a high voltage to an extraction gap a multi-charged ion beam was obtained; different peaks could be distinguished in the TOF spectrum, resulting from the separation of ions of hydrogen, adsorbed compounds in the target and copper.

In this article, we present the results of the laser ion source (LIS) for heavy ion high charge state Institute of Theoretical and Experimental Physics terawatt accumulator facility. This LIS is a duty ion source of C+4 for the injector. The main parameters of CO2 laser, vacuum target chamber, ion beam high voltage extraction system, and low energy beam transport line are shown. The stability of the LIS operation is discussed and measured ion beam parameters (ion current, pulse duration, emittance) for different charge states are presented. After the upgrading of the laser cavity, high voltage capacitors, and spark gaps and the installation of a new catalyst regenerator system, the CO2 laser became much more stable and allows long term operation. LIS works about 1 × 106 shots without intervention.

The construction of the Terawatt Accumulator (TWAC) facility is nearly completed at the ITEP in Moscow. All the major milestones have been successfully passed with a beam of carbon ions, except for the final result (the high power beam accumulation), which is on the way. The beam of C4+ ions delivered by the laser ion source is accelerated up to the energy of 300 MeV/amu by two steps—in the linear injector I3 and in the booster synchrotron UK. The accelerated beam is extracted from the UK ring and transferred to the U10 accumulator ring. Non-Liouvillian stripping technique (C4+ ⇒ C6+) is applied for stacking of C6+ batches into the accumulator ring U10. First experiments with extracted beam of ions have started in 2002. Status of the TWAC components, current results of activities aiming at mastering the ion beam stacking technique, and outlook for the TWAC advance are presented.

The experimental results of the investigations on the influence of external magnetic and electric fields on the characteristics of a tungsten ion stream emitted from a plasma produced by the Nd:glass laser (1 J, 1 ns) performed at IPPLM, Warsaw are presented. A negatively biased target up to −15 kV and a magnetic field up to 0.45 T were used in the experiment. A set of ion collectors and an electrostatic cylindrical ion energy analyzer located at small angles with respect to the laser beam axis and at large distances from the target were applied for ion measurements. The effect of an external magnetic field is essential to plasma expansion, but the effect of the retarding potential of the target is very weak in our experimental conditions. The aim of the studies was to prove the possibility of the optimization of ion beam parameters from laser-produced plasma for the particular application as a laser ion source coupled with the electron cyclotron resonance ion source for particle accelerators.