The paper presents the control architecture of a crawler mobile robot designed and developed to sample potentially contaminated lands. The robot, developed in the framework of an Italian national project named ROBILAUT, carries a driller with a customized sampling mechanism to implement on-site the required quartering, and it is controlled to move the drilling device on specific points acquired in real time before the mission starts. The paper describes the software architecture for the navigation and control, focusing on the control framework of the robotic platform. Specifically, the robot exhibits a differential drive kinematics with actuators’ constraints, and two different control strategies have been experimentally tested for comparison both in a structured environment and in the real site in May 2023.

In this paper, we propose a comparison of open-source LiDAR and Inertial Measurement Unit (IMU)-based Simultaneous Localization and Mapping (SLAM) approaches for 3D robotic mapping. The analyzed algorithms are often exploited in mobile robotics for autonomous navigation but have not been evaluated in terms of 3D reconstruction yet. Experimental tests are carried out using two different autonomous mobile platforms in three test cases, comprising both indoor and outdoor scenarios. The 3D models obtained with the different SLAM algorithms are then compared in terms of density, accuracy, and noise of the point clouds to analyze the performance of the evaluated approaches. The experimental results indicate the SLAM methods that are more suitable for 3D mapping in terms of the quality of the reconstruction and highlight the feasibility of mobile robotics in the field of autonomous mapping.

Robotic guides take visitors on a tour of a facility. Such robots must always know the position of the visitor for decision-making. Current tracking algorithms largely assume that the person will be nearly always visible. In the robotic guide application, a person’s visibility could be often lost for prolonged periods, especially when the robot is circumventing a corner or making a sharp turn. In such cases, a person cannot quickly come behind the limited field of view rear camera. We propose a new algorithm that can track people for prolonged times under such conditions. The algorithm is benefitted from an application-level heuristic that the person will be nearly always following the robot, which can be used to guess the motion. The proposed work uses a Particle Filter with a ‘follow-the-robot’ motion model for tracking. The tracking is performed in 3D using a monocular camera. Unlike approaches in the literature, the proposed work observes from a moving base that is especially challenging since a rotation of the robot can cause a large sudden change in the position of the human in the image plane that the approaches in the literature would filter out. Tracking in 3D can resolve such errors. The proposed approach is tested for three different indoor scenarios. The results showcase that the approach is significantly better than the baselines including tracking in the image and projecting in 3D, tracking using a randomized (non-social) motion model, tracking using a Kalman Filter and using LSTM for trajectory prediction.

Visual simultaneous localization and mapping (VSLAM) is a relevant solution for vehicle localization and mapping environments. However, it is computationally expensive because it demands large computational effort, making it a non-real-time solution. The VSLAM systems that employ geometric reconstructions are based on the parallel processing paradigm developed in the Parallel Tracking and Mapping (PTAM) algorithm. This type of system was created for processors that have exactly two cores. The various SLAM methods based on the PTAM were also not designed to scale to all the cores of modern processors nor to function as a distributed system. Therefore, we propose a modification to the pipeline for the execution of well-known VSLAM systems so that they can be scaled to all available processors during execution, thereby increasing their performance in terms of processing time. We explain the principles behind this modification via a study of the threads in the SLAM systems based on PTAM. We validate our results with experiments describing the behavior of the original ORB-SLAM system and the modified version.

This paper presents what is termed as the supervoxel normal distributions transform (SV-NDT), a novel three-dimensional (3-D) registration algorithm which improves the performance of the three-dimensional normal distributions transform (3-D NDT) significantly. The 3-D NDT partitions a model scan using a 3-D regular grid. Generating normal distributions using the 3-D regular grid causes considerable information loss because the 3-D regular grid does not use any information pertaining to the local surface structures of the model scan. The best type of surface (the constituent unit of each scan) for modeling with one normal distribution is known to be the plane. The SV-NDT reduces the loss of information using a supervoxel-generating algorithm at the partitioning stage. In addition, it uses the information of the local surface structures from the data scan by replacing the Euclidean distance with a function that uses local geometries as well as the Euclidean distance when each point in the data scan is matched to the corresponding normal distribution. Experiments demonstrate that the use of the supervoxel-generating algorithm increases the modeling accuracy of the normal distributions and that the proposed 3-D registration algorithm outperforms the 3-D NDT and other widely used 3-D registration algorithms in terms of robustness and speed on both synthetic and real-world datasets. Additionally, the effect of changing the function to create correspondences is also verified.

There is an increasing popularity of mobile robot applications over the Internet. Robots need some kind of wireless communication to receive commands and transmit information to users. This paper describes the problems encountered to keep the mobile robots connected and the solutions adopted. The first problem was related to delays and the very low throughput that occur when the robot roams to a new access point. Most commercial systems currently installed implement proprietary solutions with different behaviors. Here, a simple and device-independent solution for mobile robot applications is proposed. The second problem is the lack of wireless coverage in some areas of buildings. The solutions adopted for these problems are based on coverage maps.

This paper describes a landmark detection and localization using an integrated laser-camera sensor. Laser range finder can be used to detect landmarks that are direction invariant in the laser data such as protruding edges in walls, edges of tables, and chairs. When such features are unavailable, the dependant processes will fail to function. However, in many instances, larger number of landmarks can be detected using computer vision. In the proposed method, camera is used to detect landmarks while the location of the landmark is measured by the laser range finder using laser-camera calibration information. Thus, the proposed method exploits the beneficial aspects of each sensor to overcome the disadvantages of the other sensor. While highlighting the drawbacks and limitations of single sensor based methods, an experimental results and important statistics are provided for the verification of the affectiveness sensor fusion method using Extended Kalman Filter (EKF) based simultaneous localization and mapping (SLAM) as an example application.

This paper describes a complete laser-based approach for tracking the pose of a robot in a dynamic environment. The main novelty of this approach is that the matching between consecutively acquired scans is achieved using their associated curvature-based representations. The proposed scan matching algorithm consists of three stages. Firstly, the whole raw laser data is segmented into groups of consecutive range readings using a distance-based criterion and the curvature function for each group is computed. Then, this set of curvature functions is matched to the set of curvature functions associated to the previously acquired laser scan. Finally, characteristic points of pairwise curvature functions are matched and used to correctly obtain the best local alignment between consecutive scans. A closed form solution is employed for computing the optimal transformation and minimizing the robot pose shift error without iterations. Thus, the system is outstanding in terms of accuracy and computation time. The implemented algorithm is evaluated and compared to three state of the art scan matching approaches.

This paper is to investigate inherent oscillations problems of Potential Field Methods (PFMs) for nonholonomic robots in dynamic environments. In prior work, we proposed a modification of Newton's method to eliminate oscillations for omnidirectional robots in static environment. In this paper, we develop control laws for nonholonomic robots in dynamic environment using modifications of Newton's method. We have validated this technique in a multirobot search-and-forage task. We found that the use of the modifications of Newton's method, which applies anywhere C2 continuous navigation functions are defined, can greatly reduce oscillations and speed up robot's movement, when compared to the standard gradient approaches.

Autonomous mobile robot navigation systems are based on three principal kinds of techniques: map-based navigation, map-building-based navigation and mapless navigation. We propose a mapless method for trajectory description in unknown indoor environments. The method uses distance measurements from a 2D laser range finder, digitises the robot's visibility area, eliminates superfluous data and reorients their presentation with laws similar to those used in cellular automata. The landmarks are extracted and organised in a panoramic description called fresco. The frescoes which are validated by means of neighbourhood rules. The most informative frescoes are detected by means of two criteria and stored. The stored frescoes are considered as a human-like descritption of the robot's route and could be used by the robot to retrieve its route to its starting point.

In this paper distributed architectures for autonomous vehicles are addressed, with a special emphasis on its real-time control requirements. The interconnection of the distributed intelligent subsystems is a key factor in the overall performance of the system. To better understand the interconnection requirements, the main techniques and modules of a global navigation system are described. A special focus on fieldbuses properties and major characteristics is made in order to point out some potentialities, which make them attractive in autonomous vehicles real-time applications, either in terms of reliability as in terms of real-time restrictions.

This paper presents an adaptation of Lowe's numerical model-based camera localisation algorithm to the domain of indoor mobile robotics. While the original method is straightforward and even elegant, it nonetheless exhibits certain weaknesses. First, due to an affine approximation, the method is not consistent with perspective projection especially when the dimensions of objects seen are large in comparison with their distances to the camera. Next, the non-linearity of equations makes convergence properties sensitive both to the initial solution estimate and to noise. By taking the specificity and exigency of the mobile robotics domain into account, a new formulation of this method is proposed in order to improve efficiency, accuracy and robustness in the presence of noisy data and variable initial conditions. According to this formulation, line correspondences are used rather than points, the number of degrees of freedom is reduced, the affine approximation is removed and rotation is uncoupled from translation. Test results with both synthetic and real images illustrate the improvements expected from theoretical modifications.